Asidik İçeceklerin Alkasit, Bulk-fill ve Universal Rezin Kompozit Restoratif Materyallerin Yüzey Özellikleri Üzerine Etkisi

Year 2024, Volume: 8 Issue: 3, 130 - 137, 31.12.2024

Gizem Gündüz Bektaş , Özge Duman Özbilgi , Ayşehan Firdevs İyibilir , Meriç Berkman , Ferda Karabay , Safa Tuncer , Mustafa Demirci , Neslihan Tekçe

https://doi.org/10.29228/erd.83

Abstract

Amaç: Bu çalışmada iki farklı asitli içeceğin alkasit, bulk-fill ve üniversal rezin kompozit materyalin yüzey pürüzlülüğü, parlaklık ve renk değerleri üzerine olan etkisi incelenmiştir.
Gereç ve Yöntemler: Bu çalışmada self-cure ve dual-cure alkasit (Cention N, Ivoclar Vivadent AG, Schaan, Liechtenstein), bulk-fill (SonicFill3, Kerr Corporation, USA), ve bir üniversal mikro-hibrit rezin kompozit (Palfique Estelite Paste, Tokuyama, Japan) materyali test edilmiştir. Çalışmada 84 disk şeklinde örnek 3 alt gruba ayrılmıştır (n=7). Distile su (kontrol groubu), kola (Coca-Cola Company, ABD) ve şalgam suyu (Doğanay Gıda, Türkiye) solüsyon olarak kullanılmıştır. Örnekler ayrı ayrı solüsyonlarda 37 ºC’de 6 gün bekletilmiştir. Yüzey pürüzlülüğü, parlaklık ve renk ölçümleri başlangıçta, 1. günün sonunda ve 6. günün sonunda ayrı ayrı ölçülmüştür.
Bulgular: Veriler Friedman ve Kruskal-Wallis testleri ile analiz edilmiştir (p<0.05). 6 günlük bekleme süresi sonunda kola ve şalgam suyu her materyalin yüzey pürüzlülüğü ve parlaklık değerlerinde istatistiksel olarak anlamlı derecede artışa yol açmıştır (p<0.05). Distile su haricindeki solüsyonlarda bekletilen her materyalde klinik olarak kabul edilebilen eşik değeri (ΔE00=1.8) aşan miktarda renk değişimi gözlenmiştir.
Sonuçlar: Çalışmada elde edilen veriler ışığında gözlenmiştir ki, bazı materyallerde şalgam suyu koladan daha fazla renk değişimine yol açmıştır. SonicFill 3 materyalinde diğer materyallere göre daha az yüzey değişimi meydana gelmiştir.

Keywords

Rezin kompozit, yüzey pürüzlülüğü, parlaklık, renk stabilitesi, CIEDE 2000

Project Number

none

The Effect of Acidic Beverages on Surface Characteristics of the Alkasite, Bulk-fill, and Universal Resin Composite Restorative Materials

Abstract

Objectives: This study evaluated surface roughness, gloss, and color changes of an alkasite, bulk-fill, and a universal micro-hybrid resin composite after immersion in two different acidic beverages.
Material and methods: In this study, self-cured, and dual-cured alkasite (Cention N, Ivoclar Vivadent AG, Schaan, Liechtenstein), bulk-fill (SonicFill3, Kerr Corporation, USA), and a micro-hybrid resin composite (Palfique Estelite Paste, Tokuyama, Japan) materials were tested. Eighty-four disk-shaped samples were randomly divided into 3 experimental groups (n = 7). Distilled water (control group), coke (Coca-Cola Company, USA), and turnip juice (Doğanay Gıda, Turkey) were used as immersion mediums. The disks were individually immersed in their respective test substance at 37 ºC, for 6 days. Surface roughness, gloss, and color values were measured at baseline, 1 day, and 6 days.
Results: Data were analyzed by the Friedman test and the Kruskal-Wallis test (p<0.05). Following the 6-day duration, coke, and turnip juice solutions caused a statistically significant increase in the surface roughness and a decrease in the gloss values of all materials (p<0.05). In all samples except those kept in distilled water, color changes exceed the acceptable threshold value (ΔE00=1.8).
Conclusions: In the study, in some materials, turnip juice caused more color change than coke, while SonicFill 3 had lesser surface alterations than other restorative materials.

Keywords

Resin composite, surface roughness, gloss, color stability, CIEDE 2000

Ethical Statement

none

Supporting Institution

none

Project Number

none

Thanks

none

References

• Alshehri A, Alhalabi F, Mustafa M, Awad MM, Alqhtani M, Almutairi M, Alshabib A. Effects of accelerated aging on color stability and surface roughness of a biomimetic composite: an in vitro study. Biomimetics. 2022;7(4):158.
• Ardu S, R I. Resin composite thickness' influence on L* a* b* coordinates and translucency. Clin Oral Investig. 2019;23:1583-1586.
• Bitencourt SB, Catanoze IA, da Silva EVF, Dos Santos PH, Dos Santos DM, Turcio KHL, Guiotti AM. Effect of acidic beverages on surface roughness and color stability of artificial teeth and acrylic resin. J Adv Prosthodont. 2020;12(2):55.
• Bollen CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater. 1997;13(4):258-269.
• Borges MG, Soares CJ, Maia TS, et al. Effect of acidic drinks on shade matching, surface topography, and mechanical properties of conventional and bulk-fill composite resins. J Prosthet Dent. 2019;121(5):868.e1.
• Chen MH. Update on dental nanocomposites. J Dent Res. 2010;89(6):549-560.
• Cidreira Boaro LC, Pereira Lopes D, de Souza ASC, Lie Nakano E, Ayala Perez MD, Pfeifer CS, Gonçalves F. Clinical performance and chemical-physical properties of bulk fill composites resin—A systematic review and meta-analysis. Dent Mater. 2019;35.
• Daabash R, Alqahtani MQ, Price RB, Alshabib A, Niazy A, Alshaafi MM. Surface properties and Streptococcus mutans biofilm adhesion of ion-releasing resin-based composite materials. J Dent. 2023;134:104549.
• Dietschi D, Campanile G, Holz J, Meyer JM. Comparison of the color stability of ten new-generation composites: an in vitro study. Dent Mater. 1994;10:353-362.
• Duc O, Di Bella E. Staining susceptibility of resin composite materials. Am J Dent. 2019;32:39-42.
• Elfakhri F, Alkahtani R, Li C, Khaliq J. Influence of filler characteristics on the performance of dental composites: a comprehensive review. Ceram Int. 2022;48(19):27280-27294.
• Ereifej NS. The effect of polishing technique on 3-D surface roughness and gloss of dental restorative resin composites. Oper Dent. 2012;38(1).
• Ertas E, Gueler AU, Yuecel AC, Koepruelue H, Gueler E. Color stability of resin composites after immersion in different drinks. Dent Mater J. 2006;25(2):371-376.
• Ferracane JL. Resin composite—State of the art. Dent Mater. 2011;27(1):29-38.
• François P, Remadi A, Le Goff S, Abdel-Gawad S, Attal JP, Dursun E. Flexural properties and dentin adhesion in recently developed self-adhesive bulk-fill materials. J Oral Sci. 2021;63(2):139-144.
• Ghinea R, Ugarte-Alvan L, Yebra A, Pecho OE, Paravina RD, Perez MDM. Influence of surface roughness on the color of dental-resin composites. J Zhejiang Univ Sci B. 2011;12:552-562.
• Hosoya Y, Shiraishi T, Odatsu T, et al. Effects of polishing on surface roughness, gloss, and color of resin composites. J Oral Sci. 2011;53(3):283-291.
• Ilie N. Comparative effect of self-or dual-curing on polymerization kinetics and mechanical properties in a novel, dental-resin-based composite with alkaline filler. Materials. 2018;11(1):108.
• Isabel CAC, Dominguette AAS, Santos SGD, Ribeiro JCR, MoysÉs MR. Surface roughness of a resin composite. RGO Rev Gaucha Odontol. 2016;64(1):50-55.
• Kerr Dental. SonicFill 3 Singlefill Composite System. Kerr Dental. Accessed October 16, 2024. https://www.kerrdental.com/kerr-estoratives/sonicfill-3-singlefill-composite-system.
• Lepri CP, Palma-Dibb RG. Surface roughness and color change of a composite: influence of beverages and brushing. Dent Mater J. 2012;31(4):689-696.
• Ling L, Xu X, Choi GY, Billodeaux D, Guo G, Diwan RM. Novel F-releasing composite with improved mechanical properties. J Dent Res. 2009;88(1):83-88.
• Lu H, Roeder LB, Lei LEI, Powers JM. Effect of surface roughness on stain resistance of dental resin composites. J Esthet Restor Dent. 2005;17(2):102-108.
• Manojlovic D, Lenhardt L, Milićević B, Antonov M, Miletic V, Dramićanin MD. Evaluation of staining-dependent colour changes in resin composites using principal component analysis. Sci Rep. 2015;5(1):14638.
• Marghalani HY. Effect of filler particles on surface roughness of experimental composite series. J Appl Oral Sci. 2010;18:59-67.
• Miletic V, ed. Dental Composite Materials for Direct Restorations. Cham, Switzerland: Springer International Publishing; 2018.
• Nasim I, Neelakantan P, Sujeer R, Subbarao CV. Color stability of microfilled, microhybrid and nanocomposite resins—an in vitro study. J Dent. 2010;38.
• Opdam NJ, Bronkhorst EM, Roeters JM, Loomans BA. A retrospective clinical study on longevity of posterior composite and amalgam restorations. Dent Mater. 2007;23:2-8.
• Papathanasiou I, Papavasiliou G, Kamposiora P, Zoidis P. Effect of staining solutions on color stability, gloss and surface roughness of removable partial dental prosthetic polymers. J Prosthodont. 2022;31(1):65-71.
• Paravina RD, Ghinea R, Herrera LJ, et al. Color difference thresholds in dentistry. J Esthet Restor Dent. 2015;27(Suppl 1).
• Reddy PS, Tejaswi KS, Shetty S, et al. Effects of commonly consumed beverages on surface roughness and color stability of the nano, microhybrid and hybrid composite resins: an in vitro study. J Contemp Dent Pract. 2013;14(4):718.
• Rohym S, Tawfeek HEM, Kamh R. Effect of coffee on color stability and surface roughness of newly introduced single shade resin composite materials. BMC Oral Health. 2023;23(1):236.
• Schwendicke F, Lamont T, Innes N. Removing or controlling? How caries management impacts on the lifetime of teeth. In: Caries Excavation: Evolution of Treating Cavitated Carious Lesions. Vol 27. Karger Publishers; 2018:32-41.
• Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials. 2003;24(4):655-665. doi:10.1016/s0142-9612(02)00380-0.
• Tavangar M, Bagheri R, Kwon TY, Mese A, Manton DJ. Influence of beverages and surface roughness on the color change of resin composites. J Investig Clin Dent. 2018;9(3).
• Toktaş B. Şalgam suyu fermentasyonunun fenolik madde ve antosiyanin içeriği, antioksidan kapasitesi ve in vitro biyoyararlılık üzerine ekisi [doctoral dissertation]. Fen Bilimleri Enstitüsü; 2016.
• Vallittu PK, Boccaccini AR, Hupa L, Watts DC. Bioactive dental materials: do they exist and what does bioactivity mean? Dent Mater. 2018;34(5):693-694.
• Van Ende A, De Munck J, Lise DP, Van Meerbeek B. Bulk-fill composites: a review of the current literature. J Adhes Dent. 2017;19(2):95-109.
• Wang X, Huyang G, Palagummi SV, et al. High performance dental resin composites with hydrolytically stable monomers. Dent Mater. 2018;34(2):228-237.