To investigate the effects of
Mn dopant on n-ZnO/p-Si device performance, ZnO films were produced in
different Mn dopant by the sol gel spin coating method. Morphological
properties of the films were studied by emission scanning electron microscopy
(FESEM). Then, the n-ZnO:Mn/p-Si heterojunction diodes were fabricated. The
diode parameters were determined by current-voltage (I-V) measurements. The values of the diodes were found to be 8.38,
6.84 and 3.87, respectively, for the diodes produced using undoped, 1% Mn doped
and 3% Mn doped ZnO films. At the same time, electrical parameters were
determined to compare by using Cheung and Norde methods. According to the
evaluation of values obtained by different methods, an
improvement on the rectifying properties of the ZnO diode with Mn dopant has
been observed. In the continuation of the study, the photovoltaic properties of
the heterojunction diodes have been studied. The results obtained at different
illumination intensities showed that the diodes are sensitive to light. Capacitance-voltage
(C-V) measurements of the fabricated diodes are also investigated in detail.
Primary Language | English |
---|---|
Subjects | Engineering |
Journal Section | Articles |
Authors | |
Publication Date | September 26, 2019 |
Published in Issue | Year 2019 Volume: 20 Issue: 3 |