Research Article
SiC PARTİKÜLLERİYLE TAKVİYELENDİRİLMİŞ Al-2011 MATRİSLİ KOMPOZİTİN ZIMPARA İLE SULU KAYMA AŞINMASININ İNCELENMESİ
Abstract
2011 alüminyum alaşımlı metal matrisli kompozit (MMK),
vorteks metodu ile üretilmiş ve sonra presleme iş-lemi yapılmıştır. Kompozit
malzemenin üretiminde SiC partikülleri takviye edilmiştir. Deneyler sırasında
uygulanan yük değiştirilmiş ve farklı tane büyüklüğünde zımpara kullanılmıştır.
SiC partikül yüzdesinin, farklı deney şartlarında, kompozitin abrasif
aşınmasına olan etkisi araştırılmıştır. Sonuçlar; kompozitin aşın-ma direncinin
alüminyum alaşımınınkinden çok yüksek olduğunu ve SiC partikül yüzdesinin
artmasının kompozitin aşınma direncini de artırdığını göstermiştir. Zımpara
tane büyüklüğü, uygulanan yük ve kayma mesafesinin aşınma üzerinde etkili
olduğu sonucuna varılmıştır.
References
- 1. Modi, O.P., Prasad, B.K., Yegnewaran, A.H., Vaidya, M.L., “Dry sliding wear behaviour of squeeze cast aluminium alloy-silikon carbide composites”, Mater. Sci. Eng. Vol.151, pp. 235-244, 1992.
- 2. Ma, Z.Y., Liang, Y.N., Zhang, Y.Z., Lu, Y.X., Bi, J. “Sliding wear behaviour of SiCp reinforced 2024 Al alloy composites”, Mater. Sci. Eng. Vol.12, pp. 751-756, 1996.
- 3. Sahin, Y., Murphy, S., “The effect of fibre orientation of the dry sliding wear of boric-reinforced 2014 aluminium alloy”, J Mater. Sci. Vol. 34, pp. 5399-5407, 1996.
- 4. Purazrang, K., Kainer, K.U., Mordike, B.L., “Fracture toughness behaviour of a magnesium alloy metal-matrix composites produced by the infiltration technique”, Composites, 22 (6), pp. 456-462, 1991.
- 5. Delis, M.A., Keastenrmans, J.P., Delannay, F., “The wear properties of aluminium alloy composite”, Mater. Sci. Eng., Vol. 135, pp. 253-257, 1991.
- 6. Sahin, Y., Ozdin, K., “Production and evaluation the wear behaviour of SiCp reinforced 2011 aluminium alloy composites”, 4th Balkantrib International Conference on Tribology, Erciyes Univesity, Vol. 2, pp. 522-528, Kayseri, 2002.
- 7. Yang, J., Chung, D.D.L., “Wear of bauxite-particle-reinforcedaluminium alloys”, Wear, Vol. 135, pp. 53-65, 1989
- 8. Jokinen, A., Anderson, P., “Advances in powder metallurgy”, Metal Powder Industries, Vol. 2, pp. 571-530, 1990.
- 9. Roy, M., Venkataraman, B., Bhanuprased, V.V., Mhajan Y.R., Sundararajan G., “Wear bahaviour of SiCp rainforced composites”, Metall Trans, 23A, 2833, 1992.
- 10. Axen, N., Jacobson, S., “Transitions in abrasive wear resistance of fibre/and particle/reinforced aluminium”, Wear Vol. 178, pp. 1-8, 1994.
- 11. Sheu, S.Y., Lin, S.I., “Particle size effect on the abrasion wear of 20 vol.% SiCp/7075 Al composites”, Mater. Sci. pp. 35-11, 1996.
- 12. Deuis, R.L., Subramanian, C., Yellup, J.M., “Abrasive wear of aluminium alloy composites-a reviev”, Wear Vol. 201, pp. 132-144, 1996.
- 13. Skalianos, S., Kattamis, T.Z., “Dry wear of particulate reinforced composite”, Mater. Sci. Eng., Vol. 163, pp. 107, 1993.
- 14. Pramila Bai, B.N., Ramasesh, B.S., Surappa, M.K., “Dry sliding wear of A356-Al-SiCp composites”, Wear, Vol. 157, pp. 295-304, 1992.
Year 2006,
Volume: 4 Issue: 2, 118 - 121, 30.03.2006
Abstract
References
- 1. Modi, O.P., Prasad, B.K., Yegnewaran, A.H., Vaidya, M.L., “Dry sliding wear behaviour of squeeze cast aluminium alloy-silikon carbide composites”, Mater. Sci. Eng. Vol.151, pp. 235-244, 1992.
- 2. Ma, Z.Y., Liang, Y.N., Zhang, Y.Z., Lu, Y.X., Bi, J. “Sliding wear behaviour of SiCp reinforced 2024 Al alloy composites”, Mater. Sci. Eng. Vol.12, pp. 751-756, 1996.
- 3. Sahin, Y., Murphy, S., “The effect of fibre orientation of the dry sliding wear of boric-reinforced 2014 aluminium alloy”, J Mater. Sci. Vol. 34, pp. 5399-5407, 1996.
- 4. Purazrang, K., Kainer, K.U., Mordike, B.L., “Fracture toughness behaviour of a magnesium alloy metal-matrix composites produced by the infiltration technique”, Composites, 22 (6), pp. 456-462, 1991.
- 5. Delis, M.A., Keastenrmans, J.P., Delannay, F., “The wear properties of aluminium alloy composite”, Mater. Sci. Eng., Vol. 135, pp. 253-257, 1991.
- 6. Sahin, Y., Ozdin, K., “Production and evaluation the wear behaviour of SiCp reinforced 2011 aluminium alloy composites”, 4th Balkantrib International Conference on Tribology, Erciyes Univesity, Vol. 2, pp. 522-528, Kayseri, 2002.
- 7. Yang, J., Chung, D.D.L., “Wear of bauxite-particle-reinforcedaluminium alloys”, Wear, Vol. 135, pp. 53-65, 1989
- 8. Jokinen, A., Anderson, P., “Advances in powder metallurgy”, Metal Powder Industries, Vol. 2, pp. 571-530, 1990.
- 9. Roy, M., Venkataraman, B., Bhanuprased, V.V., Mhajan Y.R., Sundararajan G., “Wear bahaviour of SiCp rainforced composites”, Metall Trans, 23A, 2833, 1992.
- 10. Axen, N., Jacobson, S., “Transitions in abrasive wear resistance of fibre/and particle/reinforced aluminium”, Wear Vol. 178, pp. 1-8, 1994.
- 11. Sheu, S.Y., Lin, S.I., “Particle size effect on the abrasion wear of 20 vol.% SiCp/7075 Al composites”, Mater. Sci. pp. 35-11, 1996.
- 12. Deuis, R.L., Subramanian, C., Yellup, J.M., “Abrasive wear of aluminium alloy composites-a reviev”, Wear Vol. 201, pp. 132-144, 1996.
- 13. Skalianos, S., Kattamis, T.Z., “Dry wear of particulate reinforced composite”, Mater. Sci. Eng., Vol. 163, pp. 107, 1993.
- 14. Pramila Bai, B.N., Ramasesh, B.S., Surappa, M.K., “Dry sliding wear of A356-Al-SiCp composites”, Wear, Vol. 157, pp. 295-304, 1992.
There are 14 citations in total.
Details
| Primary Language | Turkish |
|---|---|
| Journal Section | Articles |
| Authors | |
| Publication Date | March 30, 2006 |
| Published in Issue | Year 2006 Volume: 4 Issue: 2 |