Research Article
DÜZLEMSEL YÜKLENMİŞ ORTASINDA DAİRESEL DELİK BULUNAN KOMPOZİT PLAKADA OLUŞAN ELASTİK GERİLMELERİN SONLU ELEMANLAR YÖNTEMİ İLE ANALİZİ
Abstract
Bu çalışmada,
düzlemsel yüklenmiş ortasında dairesel delik bulunan kompozit plakada oluşan
elastik gerilmelerin analizi yapılmıştır. Dairesel deliği bulunan plaka, bir
kenarı boyunca üniform eksenel düzlemsel
yüklemeye maruz bırakılmış ve deliğin kenarları boyunca herhangi bir
yükleme uygulanmamıştır. Metal matriksli kompozit plaka simetrik ve antisimetrik
olarak farklı oryantasyon açılarında takviyelendirilmiş 4 ortotropik tabakanın
yapıştırılması ile oluşturulmuştur. Elastik gerilmelerin analizi, sonlu elemanlar
yöntemi (SEM) kullanılarak yardımıyla yapılmıştır.
References
- 1. Xiong,Y, (1998) ”A stres analysis method for bi- axially loaded fastener hole in composite laminate of finite geometry”, Journal of Applied Mechanics 65,787-790.
- 2. Özbay, M, (1999) “Stress analysis of metal matrix laminated plates under in plane loading’’ , Journal of the Institute of Science and Technology, Gazi Univ. 12,3,849-857
- 3. Fish, J. Guttal R, (1996) “The s-version of finite element method for laminated composites’’, International Journal for Numerical Methods in Engineering,39,3641-3662
- 4. Sundaresan, P., Singh, G. Rao, G.V. (1998) “Buckling of moderately thick rectangular composite plates subjected to partial edge compression”International Journal Mechanicals Science , 40,11,1105-1117
- 5. Yamazaki, K. and Tsubosaka, N, (1997) “A stress analysis technique for plate and shell built-up structures with junctions and its applications to minimum weight design of stiffened strustures’’, Structural Optimization, 14,173-183
- 6. Galvanetto, U., Pellegrino, C and Schrefler, B.A.(1998) “A tree-dimensional stress recovery procedure for composite meterials” Computers & Structures, 69, 567-575
- 7. Hyer, M.W., Klang, E.C. & Cooper, D.E. (1987), “ The effects of pin elasticity, clearence and friction on the stresses in a pin-loaded orthotropic plate” Journal of Composite Materials , 21, 190-205
- 8. Karakuzu, R., Özel, A. & Sayman, O. (1997), ‘’Elastic-plastic finite element analysis of metal matrix plates with edge notches’’, Computers & Structures, 63,3 551-558
- 9. Jong, T. (1977), “Stresses around pin-loaded holes in elastically orhotropic or isotropic plates”, Journal of Composite Materials, 11, 313-331
- 10. Kaltakçı, M.Y. (1995), “İki eksenli yükleme ve-ya kesme etkisindeki daire delikli ortotropik levhalarda gerilme yağılmaları’’, S.Ü. Mühen-dislik Fakültesi Dergisi, 10,1-9
- 11. Arslan. N., Pıhtılı H.& Gur M.(2001), “Elasto-plastic stress analysis of thermoplastic matrix composite laminated and perforated plates under in-plane loading’’, Journal of Reinforced Plastics and Composites,20,1222-1252
- 12. Arslan, N., Sancaktar, E., & Çelik, M. (2000), “Elasto-plastic behavior of thermoplastic matrix roller chain link plates reinforced with steel fibers”, ASME 2000 Design Engineering Technical Conferences and Computers and Information in Engineering Conferences, 1-10
- 13. Arslan, N., Sancaktar, E. & Turgut, A. (1996), ”Elasto-Plastic Finite Element Analysis Of Isotropic Plates With U-Notches’’, ASME International Mechanical Engineering Congress and Exposition,92,45-58
- 14. Adin H. (2001) Düzlemsel Yüklü Tabakalı Kompozit Malzemelerde Elasto-Plastik Gerilme Analizi, Gazi Üniv. Fen Bil. Enst. Yüksek Lisans Tezi.
Year 2007,
Volume: 6 Issue: 1, 1 - 6, 29.11.2007
Abstract
References
- 1. Xiong,Y, (1998) ”A stres analysis method for bi- axially loaded fastener hole in composite laminate of finite geometry”, Journal of Applied Mechanics 65,787-790.
- 2. Özbay, M, (1999) “Stress analysis of metal matrix laminated plates under in plane loading’’ , Journal of the Institute of Science and Technology, Gazi Univ. 12,3,849-857
- 3. Fish, J. Guttal R, (1996) “The s-version of finite element method for laminated composites’’, International Journal for Numerical Methods in Engineering,39,3641-3662
- 4. Sundaresan, P., Singh, G. Rao, G.V. (1998) “Buckling of moderately thick rectangular composite plates subjected to partial edge compression”International Journal Mechanicals Science , 40,11,1105-1117
- 5. Yamazaki, K. and Tsubosaka, N, (1997) “A stress analysis technique for plate and shell built-up structures with junctions and its applications to minimum weight design of stiffened strustures’’, Structural Optimization, 14,173-183
- 6. Galvanetto, U., Pellegrino, C and Schrefler, B.A.(1998) “A tree-dimensional stress recovery procedure for composite meterials” Computers & Structures, 69, 567-575
- 7. Hyer, M.W., Klang, E.C. & Cooper, D.E. (1987), “ The effects of pin elasticity, clearence and friction on the stresses in a pin-loaded orthotropic plate” Journal of Composite Materials , 21, 190-205
- 8. Karakuzu, R., Özel, A. & Sayman, O. (1997), ‘’Elastic-plastic finite element analysis of metal matrix plates with edge notches’’, Computers & Structures, 63,3 551-558
- 9. Jong, T. (1977), “Stresses around pin-loaded holes in elastically orhotropic or isotropic plates”, Journal of Composite Materials, 11, 313-331
- 10. Kaltakçı, M.Y. (1995), “İki eksenli yükleme ve-ya kesme etkisindeki daire delikli ortotropik levhalarda gerilme yağılmaları’’, S.Ü. Mühen-dislik Fakültesi Dergisi, 10,1-9
- 11. Arslan. N., Pıhtılı H.& Gur M.(2001), “Elasto-plastic stress analysis of thermoplastic matrix composite laminated and perforated plates under in-plane loading’’, Journal of Reinforced Plastics and Composites,20,1222-1252
- 12. Arslan, N., Sancaktar, E., & Çelik, M. (2000), “Elasto-plastic behavior of thermoplastic matrix roller chain link plates reinforced with steel fibers”, ASME 2000 Design Engineering Technical Conferences and Computers and Information in Engineering Conferences, 1-10
- 13. Arslan, N., Sancaktar, E. & Turgut, A. (1996), ”Elasto-Plastic Finite Element Analysis Of Isotropic Plates With U-Notches’’, ASME International Mechanical Engineering Congress and Exposition,92,45-58
- 14. Adin H. (2001) Düzlemsel Yüklü Tabakalı Kompozit Malzemelerde Elasto-Plastik Gerilme Analizi, Gazi Üniv. Fen Bil. Enst. Yüksek Lisans Tezi.
There are 14 citations in total.
Details
| Primary Language | Turkish |
|---|---|
| Journal Section | Articles |
| Authors | |
| Publication Date | November 29, 2007 |
| Published in Issue | Year 2007 Volume: 6 Issue: 1 |