Research Article
Year 2008,
Volume: 7 Issue: 1, 165 - 171, 30.11.2008
Abstract
Bu
çalışmada; AISI 1020 düşük karbonlu
çelik yüzeyine GTA (gaz tungsten ark) yöntemiyle Ni/Ti tozları
kaplanmıştır. Ana malzemenin mikrosertliği (180 HV) iken, yüzey tabakasının mikrosertliği (720 HV) olarak ölçülmüş
ve sertlik değerinde önemli ölçüde gelişme sağlanmıştır. Elde edilen
kaplama tabakalarının, SEM/ EDS analizleri yapılarak mikrosertlik değerleri
kıyaslanmıştır. Metal karbürler Ni-Ti-Fe ve Ni-Ti-C üçlü faz diyagramlarının
yardımıyla bulunmuştur.
Keywords
References
- 1. Cavaleiro A., Vieira M.T., Mater.” Influence of deposition conditions on the adhesion of sputterdeposited W-C-(Co) films” Sci. Eng. A140 (1991) 631.
- 2. Karimi A., Verdon Ch., Barbezat G.,” Micros-tructure and hydroabrasive wear behaviour of high velocity oxy-fuel thermally sprayed WC-Co-(Cr) coatings” Surf. Coatings Tech. 53 (1993) 81.
- 3. Lu S.P., Kwon O.Y., Guo Y., “Wear behavior of brazed WC/NiCrBSi(Co) composite coatings”, Wear 254 (2003) 421–428.
- 4. Cerri W., Martinella R., Mor G.P., Bianchi P., Angelo D.D., “Laser deposition of carbiderein-forced coatings” Surf. Coatings Tech. 49 (1991) 40.
- 5. Dawei Z., Li T., Lei T.C., “Laser cladding of Ni–Cr3C2/(Ni+Cr) composite coating”Surf. Coa-tings Tech. 110 (1998) 81.
- 6. Li Q., Lei T.C., Chen W.Z., “Microstructural characterization of laser-clad TiCp-reinforced Ni – Cr–B–Si–C composite coatings on steel” Surf. Coatings Tech. 114 (1999) 285.
- 7. Pei Y.T., Zuo T.C.,” Gradient microstructure in laser clad TiC-reinforced Ni-alloy composite coating”Mater. Sci. Eng. A241 (1998) 259.
- 8. Weng J.R., Chang J.T., Chen K.C.., He J.L., “Solid/liquid erosion behavior of gas tungsten arc welded TiNi overlay” Wear 255 (2003) 219–224.
- 9. Buytoz S., GÜR A.K., Sarsılmaz F., (2005); “Tungsten Asal Gaz Yöntemiyle Üretilen SiCp Esaslı Kaplamaların Mikroyapısı” Metal Makine Dergisi, 17–151, 180-187.
- 10. Lin Y.C., Wang S.W., “Wear behavior of cera-mic powder cladding on an S50C steel surface” Tribology International 36 (2003) 1–9.
- 11. Juang S.C., Tarng Y.S., “Process parameter selection for optimizing the weld pool geometry in the tungsten inert gas welding of stainless steel” Journal of Materials Processing Techno-logy 122 (2002) 33–37.
- 12. Zeng C.L., Wu W.T., “Corrosion of Ni–Ti alloys in the molten (Li,K)2CO3 eutectic mixture” Corrosion Science 44 (2002), 1-12.
- 13. Wang H.M., Wang C.M., Cai L.X., “Wear and corrosion resistance of laser clad Ni2Si/NiSi composite coatings” Surface and Coatings Technology 168 (2003), 202–208.
- 14. Pantelis D.I., Bouyiouri E., Kouloumbi N., Vassiliou P., Koutsomichalis A.,” Wear and corrosion resistance of laser surface hardened structural steel” Surface and Coatings Technology 298 (2002), 125–134.
- 15. Sagawa H. “Fundamental research on metal composition and layer structure of clad metal with high-corrosion resistance and brazingstrength”, Hitachi Cable Review 2007, Germany.
- 16. Isomaki I., Hamalainen M., “Thermodynamic reevaluation of the C–Ni–Ti system” Journal of Alloys and Compounds 416, (2006) 120–124.
Year 2008,
Volume: 7 Issue: 1, 165 - 171, 30.11.2008
Abstract
References
- 1. Cavaleiro A., Vieira M.T., Mater.” Influence of deposition conditions on the adhesion of sputterdeposited W-C-(Co) films” Sci. Eng. A140 (1991) 631.
- 2. Karimi A., Verdon Ch., Barbezat G.,” Micros-tructure and hydroabrasive wear behaviour of high velocity oxy-fuel thermally sprayed WC-Co-(Cr) coatings” Surf. Coatings Tech. 53 (1993) 81.
- 3. Lu S.P., Kwon O.Y., Guo Y., “Wear behavior of brazed WC/NiCrBSi(Co) composite coatings”, Wear 254 (2003) 421–428.
- 4. Cerri W., Martinella R., Mor G.P., Bianchi P., Angelo D.D., “Laser deposition of carbiderein-forced coatings” Surf. Coatings Tech. 49 (1991) 40.
- 5. Dawei Z., Li T., Lei T.C., “Laser cladding of Ni–Cr3C2/(Ni+Cr) composite coating”Surf. Coa-tings Tech. 110 (1998) 81.
- 6. Li Q., Lei T.C., Chen W.Z., “Microstructural characterization of laser-clad TiCp-reinforced Ni – Cr–B–Si–C composite coatings on steel” Surf. Coatings Tech. 114 (1999) 285.
- 7. Pei Y.T., Zuo T.C.,” Gradient microstructure in laser clad TiC-reinforced Ni-alloy composite coating”Mater. Sci. Eng. A241 (1998) 259.
- 8. Weng J.R., Chang J.T., Chen K.C.., He J.L., “Solid/liquid erosion behavior of gas tungsten arc welded TiNi overlay” Wear 255 (2003) 219–224.
- 9. Buytoz S., GÜR A.K., Sarsılmaz F., (2005); “Tungsten Asal Gaz Yöntemiyle Üretilen SiCp Esaslı Kaplamaların Mikroyapısı” Metal Makine Dergisi, 17–151, 180-187.
- 10. Lin Y.C., Wang S.W., “Wear behavior of cera-mic powder cladding on an S50C steel surface” Tribology International 36 (2003) 1–9.
- 11. Juang S.C., Tarng Y.S., “Process parameter selection for optimizing the weld pool geometry in the tungsten inert gas welding of stainless steel” Journal of Materials Processing Techno-logy 122 (2002) 33–37.
- 12. Zeng C.L., Wu W.T., “Corrosion of Ni–Ti alloys in the molten (Li,K)2CO3 eutectic mixture” Corrosion Science 44 (2002), 1-12.
- 13. Wang H.M., Wang C.M., Cai L.X., “Wear and corrosion resistance of laser clad Ni2Si/NiSi composite coatings” Surface and Coatings Technology 168 (2003), 202–208.
- 14. Pantelis D.I., Bouyiouri E., Kouloumbi N., Vassiliou P., Koutsomichalis A.,” Wear and corrosion resistance of laser surface hardened structural steel” Surface and Coatings Technology 298 (2002), 125–134.
- 15. Sagawa H. “Fundamental research on metal composition and layer structure of clad metal with high-corrosion resistance and brazingstrength”, Hitachi Cable Review 2007, Germany.
- 16. Isomaki I., Hamalainen M., “Thermodynamic reevaluation of the C–Ni–Ti system” Journal of Alloys and Compounds 416, (2006) 120–124.
There are 16 citations in total.
Details
| Primary Language | Turkish |
|---|---|
| Journal Section | Articles |
| Authors | |
| Publication Date | November 30, 2008 |
| Published in Issue | Year 2008 Volume: 7 Issue: 1 |