Optimisation of a Hot Air Duct on a Turbo-Intercooler in a Heavy-Duty Diesel Engine Using Computational Fluid Dynamics

Abstract

Since locomotive diesel engines have high production and testing costs, researchers have carried out numerical investigations to assess various aspects of their design, including the hot air duct. In this process, they have aimed to find the optimum design in order to improve the flow efficiency and to provide equal air intake to the air coolers. Optimisation of the air channel attached to the turbo-air cooler in a locomotive engine at the design stage would serve as a reference in terms of determining the air entry points to the air cooler and the correct positioning of the air coolers on the engine. Various designs have been proposed for a hot air duct mounted on the turbo-air cooler in a heavy-duty diesel engine, and these designs have also involved other engine parts. In the present study, the hot air ducts in different designs are compared in terms of velocity distributions using computational fluid dynamics. First, a model with an S-bend, based on the current engine, is analysed; a model is then created by removing the S-bend, and the velocity distributions are compared between the two models. The flow homogeneity is found to be disrupted in the model with the S-bend (Model 1), whereas the flow is distributed more homogeneously in the model from which the S-bend was removed (Model 2). In Region A of Model 1, the average velocity was 43.300 m/s, while the value in Region B was 33.712 m/s. In Region A of Model 2, the average velocity was 39.031 m/s, whereas in Region B, it was 34.104 m/s. In the revised model, the flow tended to follow the pipe from the upper part, due to the downward orientation of the pipe after the Y-split used for routing to the dual air cooler. The downward slope was therefore removed after the Y-split, and the velocity distributions were compared. In the model without the S-bend from which the slope had been removed after the Y-split, the flow was distributed homogeneously at the top and bottom of the pipe. This model would provide equal air distribution to the air cooler inlets in a diesel locomotive engine with dual air coolers.

Keywords

• Diesel Engine
• Hot Air Duct
• Turbocharger
• Air Cooler
• CFD Analyses

References

1. ANSYS (2024, May) https://ansyshelp.ansys.com
2. Apaydin, S., & Doner, N. (2022). Simulation-based investigations of geometrical design effects on the efficiency of the intake manifold of a six-cylinder diesel engine. Advances in Engineering Software, 173, 103269. https://doi.org/10.1016/j.advengsoft.2022.103269
3. Apaydin, S, & Doner, N. (2024a). Flow analysis in different geometries for optimization of exhaust manifold in a locomotive diesel engine. Ain Shams Engineering Journal, 15(9), 102974. https://doi.org/10.1016/j.asej.2024.102974
4. Apaydin, S, & Doner, N. (2024b) Effects of piston cooling gallery geometry on temperature and f low in a heavy-duty diesel engine. Thermal Science and Engineering Progress, 51, 102644. https://doi.org/10.1016/j.tsep.2024.102644
5. Aracı, S., & Kınacı, Ö. K. (2018) Numerical calculation of pressure loss in pipe flows. GMO-SHIPMAR.
6. Aziz, S., Amin, N. A. M., Rahman, M. T. A., Rahman, A., Syayuthi, A. R. A., Majid, M. S. A. & Suhaimi, S. (2018). Design and analysis of an operative inlet. In: IOP Conference Series: Materials Science and Engineering. (Vol. 429, No. 1, p. 012075 IOP Publishing). http://doi.org/10.1088/1757-899X/429/1/012075
7. Balcı, M. (1985). Supercharging and turbocharging in diesel engines. Gazi University Technical, Education Foundation Publications, Turkey.
8. Chen, A., & Sparrow, E. M. (2009). Turbulence modeling for flow in a distribution manifold. International Journal of Heat and Mass Transfer, 52(5-6), 1573-1581. https://doi.org/10.1016/j.ijheatmasstransfer.2008.08.006

9. Dal, M. (2009). Effects of intake manifold design on engine performance. MSc Thesis, Yildiz Technical University.
10. Gupta, S. K., Singh, S., & Goyal, S. (2017). CFD analysis of heat transfer in a square duct. In: International Conference on Frontiers in Engineering, Applied Sciences and Technology (pp. 221-225).
11. Hushim, M. F., Alimin, A. J., Razali, M. A., Mohammed, A. N., Sapit, A., & Carvajal, J. C. M. (2016). Air flow behaviour on different intake manifold angle for small 4-Stroke PFI Retrokit Kit System. ARPN Journal of Engineering and Applied Sciences, 11(12), 7565-7571.
12. Kaul, S., Joshi, T., & Varshney, L. (2021). Analysis of hot air duct between turbocharger and intercooler. Materials Today, 43, Part 1, 719-725. https://doi.org/10.1016/j.matpr.2020.12.846
13. Özülkü, M. (2002) Effects of charge air cooling on a turbocharged diesel engine exhaust emission and engine performance curve. MSc Thesis, İstanbul Technical University.
14. Perumal, K., & Ganesan, R. (2015). CFD Modeling for the estimation of pressure loss coefficients of pipe fittings. An Undergraduate Project. Computer Applications in Engineering Education, 24(2), 180- 185. https://doi.org/10.1002/cae.21695
15. Saberinejad, H., Hashiehbaf, A., & Afrasiabian, E. (2010) A Study of Various Numerical Turbulence Modeling Methods in Boundary Layer Excitation of a Square Ribbed Channel. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 4(11), 1202-1208.
16. Sathishkumar, K., Soundararajan, R., Dinesh, G., & Surjith, S. (2019). Design and air flow analysis in intake manifold with different cross section using CFD. In: International Journal of Innovative Technology and Exploring Engineering (IJITEE) (Vol. 8, Issue 4).
17. Selvi, İ. (2022). Investigation of The Effects on Engine Characteristics and Emissions The Pollution (Clogging) Level of the Air Filter in Diesel Engines. MSc Thesis Trakya University Institute of Natural and Applied Sciences Department of Machine Engineering, Trakya, Turkey.
18. Tasdemir, C., & Bayraktar, S. (2016). CFD Analyis of Ventilation System for an Engine Room. In: 1st International Ship and Marine Technology Congress (SHIP-MAR 2016), Istanbul, Turkey.
19. Zhong, W. J., He, Z. X., Jiang, Z. C., & Huang, Y. L. (2012). Flow field analysis of pulse converter exhaust manifold of diesel engines. Advanced Materials Research, 468-471, 1693-1696. https://doi.org/10.4028/www.scientific.net/AMR.468-471.1693
20. Zmrhal, V., & Schwarzer, J. (2009). Numerical simulation of local loss coefficients of ventilation duct fittings. Eleventh International IBPSA Conference (pp. 1761-1766).