BibTex RIS Cite
Year 2018, Volume: 5 , 15 - 24, 07.09.2018
https://doi.org/10.17350/HJSE19030000115

Abstract

References

  • 1. Navarro E, Granryd E, Urchueguı JF, Corberan JM. A phenomenological model for analyzing reciprocating compressors. International Journal of Refrigeration 30(2007)1254 - 1265.
  • 2. Yang B, Bradshaw CR, Groll EA. Modeling of a semi-hermetic CO2 reciprocating compressor including lubrication submodels for piston rings and bearings. International journal of refrigeration 36(2013) 1925 - 1937.
  • 3. Damle R, Rigola J, Pe´rez-Segarra CD, Castro J, Oliva A. Object-oriented simulation of reciprocating compressors: Numerical verification and experimental comparison. International journal of refrigeration 34(2011)1989 - 1998.
  • 4. Pe´rez-Segarra CD, Rigola J, So`ria M, Oliva A. Detailed thermodynamic characterization of hermetic reciprocating compressors. International Journal of Refrigeration 28(2005)57 - 59.
  • 5. Klein SA. Develop Data Base for Determining Optimum Compressor Rating Points for Residential Refrigerator and Freezer Compressors. ASHRAE RP-870 (1999)
  • 6. Flesch RCC, Normey-Rico JE. Modelling identification and control of a calorimeter used for performance evaluation of refrigerant compressors. Control Engineering Practice 18(2010)254 -261.
  • 7. Elsayed AM, Raya K, Dadah AL, Mahmoud S, Rezk A. Investigation of flow boiling heat transfer inside small diameter helically coiled tubes. International Journal of Refrigeration 35(2002) 2179 - 2187.
  • 8. Zhao L, Guo L, Bai B, HouY, Zhang X. Convective boiling heat transfer and two-phase flow characteristics inside a small horizontal helically coiled tubing once-through steam generator. International Journal of Heat and Mass Transfer 46(2003) 4779 - 4788.
  • 9. Chung YJ, Bae KH, Kim KK, Lee WJ. Boiling heat transfer and dryout in helically coiled tubes under different pressure conditions. Annals of Nuclear Energy 71(2014) 298 - 303.
  • 10. Wongwises S, Polsongkram M. Evaporation heat transfer and pressure drop of HFC-134a in a helically coiled concentric tube-in-tube heat exchanger. International Journal of Heat and Mass Transfer 49(2006) 658 - 670.
  • 11. Cui W, Li L, Xin M, Jen TC, Chen Q, Liao Q. A heat transfer correlation of flow boiling in micro-finned helically coiled tube. International Journal of Heat and Mass Transfer 49(2006) 2851 - 2858.
  • 12. Kakaç S, Liu H. Heat Exchangers: Selection, rating and thermal design. CRC Press, 2012.
  • 13. Sözen A, Arcaklioğlu E, Menlík T. Derivation of empirical equations for thermodynamic properties of a ozone safe refrigerant (R404a) using artificial neural network. Expert Systems with Applications 37(2010)1158 - 1168.
  • 14. Holman JP. Experimental Methods for Engineers, 6th ed., McGraw-Hill, Singapore, 1994.
  • 15. Gökçeler A.Ş., http://www.gokcelersogutma.com.tr/

Design Manufacture and Performance Test of a Reciprocating Refrigeration Compressor

Year 2018, Volume: 5 , 15 - 24, 07.09.2018
https://doi.org/10.17350/HJSE19030000115

Abstract

The first generation of refrigeration compressors is reciprocating type compressors, the second generation is scroll type, and the third generation is screw type compressors that are available on the market. Although the need of semi-hermetic refrigeration compressor in Turkey market is 15000 per year, there is no any domestic manufacturer of semi-hermetic refrigeration compressor, and consequently Turkey imports all of the refrigeration compressors from abroad market. In this study, the performance and the manufacturing processes of the semi-hermetic refrigeration compressor that is designed and manufactured with a hundred percent of domestic opportunities are investigated. The performance tests of the compressor are done, the catalogue of the compressor is prepared and it is 12 % more efficient in comparison with equivalent European one.

References

  • 1. Navarro E, Granryd E, Urchueguı JF, Corberan JM. A phenomenological model for analyzing reciprocating compressors. International Journal of Refrigeration 30(2007)1254 - 1265.
  • 2. Yang B, Bradshaw CR, Groll EA. Modeling of a semi-hermetic CO2 reciprocating compressor including lubrication submodels for piston rings and bearings. International journal of refrigeration 36(2013) 1925 - 1937.
  • 3. Damle R, Rigola J, Pe´rez-Segarra CD, Castro J, Oliva A. Object-oriented simulation of reciprocating compressors: Numerical verification and experimental comparison. International journal of refrigeration 34(2011)1989 - 1998.
  • 4. Pe´rez-Segarra CD, Rigola J, So`ria M, Oliva A. Detailed thermodynamic characterization of hermetic reciprocating compressors. International Journal of Refrigeration 28(2005)57 - 59.
  • 5. Klein SA. Develop Data Base for Determining Optimum Compressor Rating Points for Residential Refrigerator and Freezer Compressors. ASHRAE RP-870 (1999)
  • 6. Flesch RCC, Normey-Rico JE. Modelling identification and control of a calorimeter used for performance evaluation of refrigerant compressors. Control Engineering Practice 18(2010)254 -261.
  • 7. Elsayed AM, Raya K, Dadah AL, Mahmoud S, Rezk A. Investigation of flow boiling heat transfer inside small diameter helically coiled tubes. International Journal of Refrigeration 35(2002) 2179 - 2187.
  • 8. Zhao L, Guo L, Bai B, HouY, Zhang X. Convective boiling heat transfer and two-phase flow characteristics inside a small horizontal helically coiled tubing once-through steam generator. International Journal of Heat and Mass Transfer 46(2003) 4779 - 4788.
  • 9. Chung YJ, Bae KH, Kim KK, Lee WJ. Boiling heat transfer and dryout in helically coiled tubes under different pressure conditions. Annals of Nuclear Energy 71(2014) 298 - 303.
  • 10. Wongwises S, Polsongkram M. Evaporation heat transfer and pressure drop of HFC-134a in a helically coiled concentric tube-in-tube heat exchanger. International Journal of Heat and Mass Transfer 49(2006) 658 - 670.
  • 11. Cui W, Li L, Xin M, Jen TC, Chen Q, Liao Q. A heat transfer correlation of flow boiling in micro-finned helically coiled tube. International Journal of Heat and Mass Transfer 49(2006) 2851 - 2858.
  • 12. Kakaç S, Liu H. Heat Exchangers: Selection, rating and thermal design. CRC Press, 2012.
  • 13. Sözen A, Arcaklioğlu E, Menlík T. Derivation of empirical equations for thermodynamic properties of a ozone safe refrigerant (R404a) using artificial neural network. Expert Systems with Applications 37(2010)1158 - 1168.
  • 14. Holman JP. Experimental Methods for Engineers, 6th ed., McGraw-Hill, Singapore, 1994.
  • 15. Gökçeler A.Ş., http://www.gokcelersogutma.com.tr/

Details

Primary Language English
Journal Section Research Article
Authors

Yusuf Ali KARA This is me

Deniz UZUNSOY This is me

Hüseyin LEKESİZ This is me

Mustafa Gürkan AYDENİZ This is me

Publication Date September 7, 2018
Published in Issue Year 2018 Volume: 5

Cite

Vancouver KARA YA, UZUNSOY D, LEKESİZ H, AYDENİZ MG. Design Manufacture and Performance Test of a Reciprocating Refrigeration Compressor. Hittite J Sci Eng. 2018;5:15-24.

Hittite Journal of Science and Engineering is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY NC).