Influence of fabrication temperature on the structural features of chitosan gels for tissue engineering applications
Abstract
Chitosan is a natural polymer synthesized from the chitin of crab, lobster shells, fungal mycelia and shrimp. It has been used for biomedical applications in many different structures including thin film, nanofibrous membrane, sponge, microsphere, hydrogel and cryogel because of its non-toxicity, biodegradability, biocompatibility and antibacterial properties. Cryogelation technique is based on the crosslinking of polymers or crosslinking polymerization of monomers in the presence of crosslinking agents at temperatures below zero. On the other hand, hydrogels are mainly prepared at room temperature. In this study, chitosan gels were prepared at different reaction temperatures (-25, 0 and +25°C). Swelling profiles revealed that with decreasing reaction temperature swelling ratio increased. In addition, the degradation rate of chitosan gels prepared at -25 and +25°C was measured 50.60 and 30.88%, respectively. Results indicate that reaction temperature affects the architecture and characterization results of the gels.
Keywords
References
- 1. Aamodt, J.M., and D.W. Grainger, Extracellular matrix-based biomaterial scaffolds and the host response. Biomaterials, 2016. 86: p. 68-82.
- 2. Gümüşderelioğlu, M., B. Maviş, A. Karakeçili, A.S. Kahraman, S. Çakmak, S. Tığlı, T.T. Demirtaş, and S. Aday, Doku mühendisliğinde nanoteknoloji. Bilim ve Teknik Dergisi Yeni Ufuklara, 2007.
- 3. Patel, N.R., and P.P. Gohil, A review on biomaterials: scope, applications & human anatomy significance. International Journal of Emerging Technology and Advanced Engineering, 2012. 2(4): p. 91-101.
- 4. Place, E.S, N.D Evans, and M.M. Stevens, Complexity in biomaterials for tissue engineering. Nature materials, 2009. 8(6): p. 457-470.
- 5. Koruyucu, A. Evaluation of crosslinking type and antibacterial activities of copper oxide loaded cotton textile fabrics. International Advanced Researches and Engineering Journal, 2018. 2(3): p. 278-281.
- 6. Gümüşderelioğlu, M., Biyomalzemeler. Tübitak, 2002.
- 7. Kumar, A., R. Mishra, Y. Reinwald, and S. Bhat, Cryogels: Freezing unveiled by thawing. Materials Today, 2010. 13(11): p. 42-44.
- 8. Değirmenci, E., Polivinil Alkol Membranlara İtakonik Asit Aşılanması. 2006.
Details
Primary Language
English
Subjects
Engineering
Journal Section
Research Article
Authors
Nimet Bölgen
*
0000-0003-3162-0803
Türkiye
Seda Ceylan
This is me
0000-0002-1088-7886
Türkiye
Didem Demir
0000-0002-2977-2077
Türkiye
Publication Date
December 15, 2019
Submission Date
October 26, 2018
Acceptance Date
September 9, 2019
Published in Issue
Year 2019 Volume: 3 Number: 3
Cited By
A novel formula derived by using ABC algorithm for calculation of the average fiber diameter of electrospun poly (Ԑ-caprolactone) scaffolds
International Advanced Researches and Engineering Journal
https://doi.org/10.35860/iarej.832439
