FUNCTIONALIZATION OF WOVEN FABRICS BY 3D PRINTED STRUCTURES IN FUSED FILAMENT FABRICATION (FFF): EFFECTS OF INFILL PATTERNS ON TENSILE STRENGTH

Year 2022, , 329 - 337, 31.08.2022

Murat Demir

https://doi.org/10.46519/ij3dptdi.1134373

Cited By: 2

Abstract

Three-dimensional (3D) printing has an increasing popularity in recent years with easy availability and the wide range of applications in many fields. While producing textile-like structures with 3D technology is still a challenging problem, combining textiles with 3D printed structures enables the manufacture of many alternative structures in the field of textile applications. This study investigates the effect of 3D parts with different infill patterns printed onto the cotton woven fabric for tensile strength. For this purpose, 3D parts with concentric, grid and triangle infill patterns were printed onto plain and twill woven fabrics with polylactic acid (PLA) filaments in the Fused Filament Fabrication technique. Adhesion between fabric and 3D parts and tensile strengths of produced structures were measured to assess the effectiveness of 3D printing. Results showed that greater adhesion between 3D parts and fabrics were obtained for plain-woven fabrics. The infill patterns were also found effective for the tensile strength performance.

Keywords

3D printing, woven fabrics, additive manufacturing, FDM

References

• 1. Sitotaw, D.B., Ahrendt, D., Kyosev, Y. and Kabish, A.K., “Additive manufacturing and textiles-state-of-the-art”, Applied Sciences, Vol.10, Issue 15, Pages 1-22, 2020.
• 2. American Society of Testing and Materials, “Guide for additive manufacturing-design-directed energy deposition” (Standard N: ASTM F3413-19, 2019.
• 3. Goncu-Berk, G., Karacan, B. and Balkis, I., “Embedding 3D printed filaments with knitted textiles: investigation of bonding parameters”, Clothing and Textiles Research Journal, Vol. 40, Issue 3, Pages 171-186, 2020.
• 4. Chakraborty, S. and Biswas, M.C., “3D printing technology of polymer-fiber composites in textile and fashion industry: A potential roadmap of concept to consumer”, Composite Structures, Vol. 248, Pages 1-14, 2020.
• 5. Chakraborty, S. and Biswas, M.C., “Fused deposition modelling 3D printing technology in textile and fashion ındustry: materials and innovation” Modern Concepts in Material Science Vol. 2, Issue1, Pages 1-5,2019.
• 6. Sabantina, L., Kinzel, F. and Ehrmann, A., Finsterbusch, K., “Combining 3D printed forms with textile structures –mechanical and geometrical properties of multi-material systems”, IOP Conference Series: Materials Science and Engineering, Vol. 87, Issue 1, Pages 1-5, 2015.
• 7. Korger, M., Bergschneider, J., Lutz, M., Mahltig, B., Finsterbusch, K. and Rabe, M., “Possible applications of 3D printing technology on textile substrates”, IOP Conference Series: Materials Science and Engineering, Vol. 141, Issue 1, Pages 1-6, 2016.
• 8. Ahrendt, D., Karam, A.R. and Krzywinski, S., “CAE-supported process for additive manufacturing of orthopaedic devices”, International Textile Conference, Pages 28-29, Dresden, 2019.
• 9. Spahiu, T., Canaj, E. and Shehi, E., “3D printing for clothing production”, Journal of Engineered Fibers and Fabrics, Vol. 15, Pages 1-8, 2020.
• 10. Korger, M., Glogowsky, A., Sanduloff, S., Steinem, C., Huysman, SW., Horn, B., Ernst, M. and Rabe, M.,“Testing thermoplastic elastomers selected as flexible three-dimensional printing materials for functional garment and technical textile applications”, Journal of Engineered Fibers and Fabrics, Vol. 15, Pages 1-10, 2020.
• 11. Melnikova, R., Ehrmann, A. and Finsterbusch, K., “3D printing of textile-based structures by fused deposition modelling (FDM) with different polymer materials”, IOP Conference Series: Materials Science and Engineering, Vol. 62, Issue 1, Pages 1-7, 2014.
• 12. Grothe, T., Brockhagen, B. and Storck, J.L., “Three-dimensional printing resin on different textile substrates using stereolithography: A proof of concept”, Journal of Engineered Fibers and Fabrics Vol. 15, Pages 1-7, 2020.
• 13. Muthukumarana, S., Messerschmidtv, M.A., Denys, J.C.M., Steimle, J., Scholl, P.M. and Nanayakkara, S., “May. Clothtiles: a prototyping platform to fabricate customized actuators on clothing using 3D printing and shape-memory alloys”, CHI Conference on Human Factors in Computing Systems (CHI 2021), Pages 1-12, Yokohama, 2021.
• 14. Rivera, M.L., Moukperian, M., Ashbrook, D., Mankoff, J. And Hudson, S.E., “Stretching the bounds of 3D printing with embedded textiles. Human Factors in Computing Systems”, 2017 CHI conference on human factors in computing systems, Pages 497-508, Denver, 2017.
• 15. Malengier, B., Hertleer, C., Cardon, L. And Langenhove, L.V., “3D printing on textiles: testing of adhesion”, International Conference on Intelligent Textiles and Mass Customisation, Pages 1-6, Gent, 2018.
• 16. Narula, A., Pastore, C.M., Schmelzeisen, D., El Basri, S., Schenk, J. And Shajoo, S., “Effect of knit and print parameters on peel strength of hybrid 3-D printed textiles”, Journal of Textiles and Fibrous Materials, Vol 1, Pages 1-10,2018.
• 17. Mpofu, N.S., Mwasiagi, J.I., Nkiwane, L.C. and Njuguna, D., “Use of regression to study the effect of abric parameters on the adhesion of 3D printed PLA polymer onto woven fabrics”, Fashion and Textiles Vol. 6, Issue 24, Pages 1-12, 2019.
• 18. Korger, M., Bergschneider, J., Lutz, M., Mahltig, B., Finsterbusch, K. and Rabe, M., ”Possible applications of 3D printing technology on textile substrates”, IOP Conference Series: Materials Science and Engineering Vol. 141, Issue 1, Pages 1-6, 2016.
• 19. Unger, L., Scheideler, M., Meyer, P., Harland, J., Görzen, A., Wortmann, M., Dreyer, A. and Ehrmann, A., “Increasing adhesion of 3d printing on textile fabrics by polymer coating”, Textilec, Vol. 61, Issue 4, Pages 265-271, 2018.
• 20. Kozior, T., Döpke, C., Grimmelsmann, N., Juhász, J.I. and Ehrmann, A., “Influence of fabric pretreatment on adhesion of three-dimensional printed material on textile substrates”, Advance Mechanical Engineering, Vol. 10, Issue 8, Pages 1-8, 2018.
• 21. Spahiu, T., Grimmelsmann, N., Ehrmann, A., Piperi, E. and Shehi, E., “ Effect of 3D printing on textile fabric”, 1st International Conference Engineering and Entrepreneurship, Pages 1-7, Tirana, 2017.
• 22. Pei, E., Shen, J. and Watling, J., “Direct 3D printing of polymers onto textiles: Experimental studies and applications”, Rapid Prototyping Journal, Vol. 21, Issue 5, Pages 556-571, 2015.
• 23. Čuk, M., Bizjak, M., Muck, D. and Kočevar, T.N., “3D printing and functionalization of textiles”, The Tenth International Symposium GRID, Pages 56-59, Novisad, 2020.
• 24. Grimmelsmann, N., Kreuziger, M., Korger, M., Meissner, H. and Ehrmann, A., “Adhesion of 3D printed material .on textile substrates”, Rapid Prototyping Journal Vol. 24, Issue 1, Pages 166-170, 2017. 25. Yeoh, K.C., Cheeah, C.S., Pushpanathan, R., Song, C.C., Tan, M.A. and Teh, P.L., “Effect of infill pattern on mechanical properties of 3D printed PLA and cPLA”, IOP Conference Series: Materials Science and Engineering, Vol. 957, Issue 1, Pages 1-10, 2020.
• 26. Sular, V., Oner, E. and Okur, A., “Roughness and frictional properties of cotton and polyester woven fabrics”, Indian Journal of Fibre & Textile Research, Vol. 38, Pages 349-356, 2013.
• 27. Sucuoglu, H.S., Bogrekci, I., Demircioglu, P. and Gultekin, A., “The effect of three dimensional printed infill pattern on structural strength”, El-Cezerî Journal of Science and Engineering, Vol. 5, Issue 3, Pages 785-796, 2018.
• 28. Mishra, P.K., Senthil, P., Adarsh, S. and Anoop, M.S., “An investigation to study the combined effect of different infill pattern and infill density on the impact strength of 3D printed polylactic acid parts”, Composites Communications, Vol. 24, Pages 1-6, 2021.
• 29. Ayvali, M., Bussieweke, L., Druzinin, G., Korkmaz, M. and Ehrmann, A., “3D printing on warp-knitted fabrics”, IOP Conference Series: Materials Science and Engineering, Vol 1031, Issue 1, Pages 1-6, 2020.