Review
BibTex RIS Cite

PALEONTOLOJİK ÇALIŞMALARDA 3 BOYUTLU BASKI TEKNOLOJİSİNİN KULLANIMI

Year 2018, Volume: 2 Issue: 3, 55 - 59, 30.12.2018

Abstract

Paleontolojik çalışmaların temelini
fosiller oluşturur ve fosiller genellikle diş, kemik, boynuz gibi sert
dokulardan oluşur. Bu dokular her ne kadar sert doku olarak adlandırılsa da,
fosilleşme süreci bu dokuların tahrip olmasına yol açar. Toprak altında uzun
süre kalan fosillerin uğradığı gömülüm sonrası süreçler, fosiller üzerinde
çalışma yapmayı zorlaştıracak etkiler bırakır. Bu süreçlerden dolayı, hassas
temaslara karşı bile korunmasız halde olan fosiller üzerinde bilimsel
çalışmalar yapmak ve bu fosilleri sergilemek çoğu durumda zor, hatta imkânsız
hale gelir. 3 boyutlu tarama ve baskı teknolojilerinin kullanılmaya başlaması
bu sorunun giderilmesinde çok büyük bir yenilik sağlamıştır. Fosile direkt
temasın gerekmediği tarama uygulamaları ile elde edilen 3 boyutlu görüntüler
üzerinden elden edilen baskılar, kullanılan donanıma bağlı olarak bire bir
boyutta kopyalar üretilmesini mümkün kılarak hassas fosillerin zarar görmeden
incelenmesine olanak sağlar. Ayrıca, bu kopyalama yöntemleri ile fosillerin
eksik kısımlarının da tamamlanması ve canlılar hakkında daha fazla bilgi
edinilmesi mümkün olmuştur. Bilimsel çalışmaların yanında, kopyalama ile elde
edilen fosil kopyaları müzelerde ve eğitim kurumlarında da kullanılarak kamu
yararına önemli faydalar sağlamaktadır. Bu çalışma, dünyada 3 boyutlu baskı
teknolojisinin paleontolojik çalışmalarda nasıl kullanıldığının ve bu
kullanımın getirdiği kazanımların özetlendiği bir derleme niteliğindedir.   

References

  • Rahman IA, Adcock, K, Garwood RJ. Virtual Fossils: a New Resource for Science Communucation in Paleontology. Evolution: Education and Outreach. 2012; 5 (4): 635-641.
  • Das AJ, Murmann DC, Cohrn K, Raskar R. A method for rapid 3D scanning and replication of large paleontological specimens. PLos ONE. 2017; 12 (7): e0179264.
  • Cunningham JA, Rahman IA, Lautenschlager S, Rayfield EJ, Donoghue PCJ. A virtual world of paleontology. Trends in Ecology & Evolution. 2014; 29 (6): 347-357.
  • Schilling R, Jastram B, Wings O, Schwarz-Wings D, Issever AS. Reviving the Dinosaur: Virtual Reconstruction and Three-dimensional Printing of a Dinosaur Vertebra. Radiology. 2014; 270 (3): 864-871.
  • Lautenschlager S. Reconstructing the Past: methods and techniques fort he digital restoration of fossils. Royal Society Open Science. 2016; 3:160342.
  • Holloway RL, Hurst SD, Garvin HM, Schoenemann PT, Vanti WB, Berger LR, Hawks J. Endocast morphology of Homo naledi from the Dinaledi Chamber, South Africa. Proceedings of the National Academy of Sciences. 2018; 201720842; DOI:10.1073/pnas.1720842115
  • Metallo A, Rossi V. The Future of Three-Dimensional Imaging and Museum Applications. Curator The Museum Journal. 2011; 54 (1): 63-69.

THE 3-D PRINT APPLICATIONS IN PALEONTOLOGICAL STUDIES

Year 2018, Volume: 2 Issue: 3, 55 - 59, 30.12.2018

Abstract

The fossils are the fundamental
material of the paleontological research and generally consist of the hard
material such as; teeth, bones, horns and antlers. Although these structures
are called as hard tissues, the fossilization process damages them. The fossils
undergo taphonomic processes during their presence under earth, and these
processes make difficult even sometimes impossible to study or display them. In
this point, 3-D (three dimensional) scanning and printing technologies provide invaluable
contributions in paleontological studies. After obtaining the 3-D images of the
fossils via scans which don’t require a direct contact to the fossils and thus
harmless, it is possible to have exactly same copies of the fossils depending
on the equipment. These copies provide with not onyl the copies of the whole
fossils but also provide to enable to reconstruct the fossils which have
missing parts. Furthermore, these copies are also very useful for museum
displays and educational purposes in institutions. This presentation is a
review of the 3-D print applications in paleontological studies in the world
and thus aims to summarize the advantages of this method in paleontology.  

References

  • Rahman IA, Adcock, K, Garwood RJ. Virtual Fossils: a New Resource for Science Communucation in Paleontology. Evolution: Education and Outreach. 2012; 5 (4): 635-641.
  • Das AJ, Murmann DC, Cohrn K, Raskar R. A method for rapid 3D scanning and replication of large paleontological specimens. PLos ONE. 2017; 12 (7): e0179264.
  • Cunningham JA, Rahman IA, Lautenschlager S, Rayfield EJ, Donoghue PCJ. A virtual world of paleontology. Trends in Ecology & Evolution. 2014; 29 (6): 347-357.
  • Schilling R, Jastram B, Wings O, Schwarz-Wings D, Issever AS. Reviving the Dinosaur: Virtual Reconstruction and Three-dimensional Printing of a Dinosaur Vertebra. Radiology. 2014; 270 (3): 864-871.
  • Lautenschlager S. Reconstructing the Past: methods and techniques fort he digital restoration of fossils. Royal Society Open Science. 2016; 3:160342.
  • Holloway RL, Hurst SD, Garvin HM, Schoenemann PT, Vanti WB, Berger LR, Hawks J. Endocast morphology of Homo naledi from the Dinaledi Chamber, South Africa. Proceedings of the National Academy of Sciences. 2018; 201720842; DOI:10.1073/pnas.1720842115
  • Metallo A, Rossi V. The Future of Three-Dimensional Imaging and Museum Applications. Curator The Museum Journal. 2011; 54 (1): 63-69.
There are 7 citations in total.

Details

Primary Language Turkish
Subjects Health Care Administration
Journal Section Articles
Authors

Ahmet İhsan Aytek

Publication Date December 30, 2018
Submission Date May 22, 2018
Published in Issue Year 2018 Volume: 2 Issue: 3

Cite

APA Aytek, A. İ. (2018). PALEONTOLOJİK ÇALIŞMALARDA 3 BOYUTLU BASKI TEKNOLOJİSİNİN KULLANIMI. International Journal of 3D Printing Technologies and Digital Industry, 2(3), 55-59.
AMA Aytek Aİ. PALEONTOLOJİK ÇALIŞMALARDA 3 BOYUTLU BASKI TEKNOLOJİSİNİN KULLANIMI. IJ3DPTDI. December 2018;2(3):55-59.
Chicago Aytek, Ahmet İhsan. “PALEONTOLOJİK ÇALIŞMALARDA 3 BOYUTLU BASKI TEKNOLOJİSİNİN KULLANIMI”. International Journal of 3D Printing Technologies and Digital Industry 2, no. 3 (December 2018): 55-59.
EndNote Aytek Aİ (December 1, 2018) PALEONTOLOJİK ÇALIŞMALARDA 3 BOYUTLU BASKI TEKNOLOJİSİNİN KULLANIMI. International Journal of 3D Printing Technologies and Digital Industry 2 3 55–59.
IEEE A. İ. Aytek, “PALEONTOLOJİK ÇALIŞMALARDA 3 BOYUTLU BASKI TEKNOLOJİSİNİN KULLANIMI”, IJ3DPTDI, vol. 2, no. 3, pp. 55–59, 2018.
ISNAD Aytek, Ahmet İhsan. “PALEONTOLOJİK ÇALIŞMALARDA 3 BOYUTLU BASKI TEKNOLOJİSİNİN KULLANIMI”. International Journal of 3D Printing Technologies and Digital Industry 2/3 (December 2018), 55-59.
JAMA Aytek Aİ. PALEONTOLOJİK ÇALIŞMALARDA 3 BOYUTLU BASKI TEKNOLOJİSİNİN KULLANIMI. IJ3DPTDI. 2018;2:55–59.
MLA Aytek, Ahmet İhsan. “PALEONTOLOJİK ÇALIŞMALARDA 3 BOYUTLU BASKI TEKNOLOJİSİNİN KULLANIMI”. International Journal of 3D Printing Technologies and Digital Industry, vol. 2, no. 3, 2018, pp. 55-59.
Vancouver Aytek Aİ. PALEONTOLOJİK ÇALIŞMALARDA 3 BOYUTLU BASKI TEKNOLOJİSİNİN KULLANIMI. IJ3DPTDI. 2018;2(3):55-9.

download

International Journal of 3D Printing Technologies and Digital Industry is lisenced under Creative Commons Atıf-GayriTicari 4.0 Uluslararası Lisansı