Comparative Analysis of Traditional Production Systems with Flexible Manufacturing Systems

Tarkan KOCA [1] , Serhat AKSUNGUR [2]


 Nowadays technology is developing rapidly and the adaptation of emerging technology to daily life is very fast. Within this context, production technologies are developing rapidly and parallel to this production instrument's costs are decreased. In this way, producers can make investments more easily by getting current technology.

In parallel with industrial development, some parameters such lost time, labor, raw materials must reduce. When considering expected product variety, especially modification on the produced product is a difficult process. Revising of the production system according to the final product is substantially increased the amount of lost time. In addition, in this revision process previously realized investment is becoming inert and this quite increases costs. It is almost impossible the creation of a separate production line for each product in a company which has a lot of variety of products. Nowadays in this needed speed production process, instead of conventional production systems flexible manufacturing systems began to be preferred in the industry.

In this study, functions, components and the overall structures of the flexible manufacturing systems are described. Differences between traditional production systems and flexible manufacturing systems, and the advantages relative to each other were examined. In the study, Flexible Manufacturing Systems Laboratory within the Inonu University Arapgir Vocational High School was taken as an example.
Flexible manufacturing systems, traditional production systems, factory organization.
  • [1] M . Doğan, İşletme Ekonomisi ve Yönetimi, Genişletilmiş 2. Baskı, İzmir, 2002.
  • [2] M. H. Demir, Ş. Gümüşoğlu, Üretim İşlemler Yönetimi, Gözden Geçirilmiş, Genişletilmiş 5. Baskı, Beta Basım Yayım Dağıtım A.Ş., İstanbul, 1998.
  • [3] M. Tekin, B. Atamak, "Esnek Üretim Sistemleri ve Esnek Üretim Sistemleri ile İlgili Örnek Uygulamalar", I. Ulusal Üretim Araştırmaları Sempozyumu, İstanbul, 1997.
  • [4] N. Atalay, D. Birbil, N. Demir, Ş. Yıldırım, KOBİ’lerin Esnek Üretim Sistemleri Yönünden İrdelenmesi ve Bir Uygulama, MPM Yayınları, n:632, Ankara, 1998.
  • [5] (15.06.2016) http://www.festo-didactic.com/int-en/
  • [6] Festo Didactic: “Learning System for Automation and Communications”, “Modular Production System”, Training Documentation, 2001.
Subjects Engineering
Journal Section Research Article
Authors

Author: Tarkan KOCA
Institution: INONU UNIV
Country: Turkey


Author: Serhat AKSUNGUR
Institution: INONU UNIV
Country: Turkey


Dates

Publication Date : December 1, 2016

Bibtex @research article { ijamec280362, journal = {International Journal of Applied Mathematics Electronics and Computers}, issn = {}, eissn = {2147-8228}, address = {}, publisher = {Selcuk University}, year = {2016}, volume = {}, pages = {374 - 378}, doi = {10.18100/ijamec.280362}, title = {Comparative Analysis of Traditional Production Systems with Flexible Manufacturing Systems}, key = {cite}, author = {KOCA, Tarkan and AKSUNGUR, Serhat} }
APA KOCA, T , AKSUNGUR, S . (2016). Comparative Analysis of Traditional Production Systems with Flexible Manufacturing Systems. International Journal of Applied Mathematics Electronics and Computers , (Special Issue-1) , 374-378 . DOI: 10.18100/ijamec.280362
MLA KOCA, T , AKSUNGUR, S . "Comparative Analysis of Traditional Production Systems with Flexible Manufacturing Systems". International Journal of Applied Mathematics Electronics and Computers (2016 ): 374-378 <https://dergipark.org.tr/en/pub/ijamec/issue/25619/280362>
Chicago KOCA, T , AKSUNGUR, S . "Comparative Analysis of Traditional Production Systems with Flexible Manufacturing Systems". International Journal of Applied Mathematics Electronics and Computers (2016 ): 374-378
RIS TY - JOUR T1 - Comparative Analysis of Traditional Production Systems with Flexible Manufacturing Systems AU - Tarkan KOCA , Serhat AKSUNGUR Y1 - 2016 PY - 2016 N1 - doi: 10.18100/ijamec.280362 DO - 10.18100/ijamec.280362 T2 - International Journal of Applied Mathematics Electronics and Computers JF - Journal JO - JOR SP - 374 EP - 378 VL - IS - Special Issue-1 SN - -2147-8228 M3 - doi: 10.18100/ijamec.280362 UR - https://doi.org/10.18100/ijamec.280362 Y2 - 2016 ER -
EndNote %0 International Journal of Applied Mathematics Electronics and Computers Comparative Analysis of Traditional Production Systems with Flexible Manufacturing Systems %A Tarkan KOCA , Serhat AKSUNGUR %T Comparative Analysis of Traditional Production Systems with Flexible Manufacturing Systems %D 2016 %J International Journal of Applied Mathematics Electronics and Computers %P -2147-8228 %V %N Special Issue-1 %R doi: 10.18100/ijamec.280362 %U 10.18100/ijamec.280362
ISNAD KOCA, Tarkan , AKSUNGUR, Serhat . "Comparative Analysis of Traditional Production Systems with Flexible Manufacturing Systems". International Journal of Applied Mathematics Electronics and Computers / Special Issue-1 (December 2016): 374-378 . https://doi.org/10.18100/ijamec.280362
AMA KOCA T , AKSUNGUR S . Comparative Analysis of Traditional Production Systems with Flexible Manufacturing Systems. International Journal of Applied Mathematics Electronics and Computers. 2016; (Special Issue-1): 374-378.
Vancouver KOCA T , AKSUNGUR S . Comparative Analysis of Traditional Production Systems with Flexible Manufacturing Systems. International Journal of Applied Mathematics Electronics and Computers. 2016; (Special Issue-1): 378-374.