Research Article

Experimental Investigation of Diesel Engine Characteristics Fueled with Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends

Volume: 10 Number: 3 October 4, 2026

Experimental Investigation of Diesel Engine Characteristics Fueled with Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends

Abstract

Multi-component alternative fuel blends have the potential to improve diesel engine performance and combustion while reducing harmful exhaust emissions. In this study, the effects of toluene and cerium oxide (CeO2) nanoparticles added to diesel fuel on engine performance, combustion, and emissions were experimentally investigated. The experiments were conducted on a single-cylinder diesel research engine at a constant engine speed of 1800 rpm and at four different engine loads: 10.98, 16.48, 21.97, and 27.46 Nm. Commercial diesel fuel was employed as the reference fuel, whereas the alternative fuels comprised a T10D90 blend containing 10 vol. % toluene and T10D90C40, T10D90C80, and T10D90C120 blends, containing 40, 80, and 120 ppm CeO2 nanoparticles, respectively. The effects of the fuels were evaluated in terms of in-cylinder pressure, heat release rate (HRR), indicated thermal efficiency (ITE), brake specific fuel consumption (BSFC), exhaust gas temperature (EGT), indicated mean effective pressure (IMEP), coefficient of variation of IMEP (COVIMEP), maximum pressure rise rate (MPRR), combustion phase (CA50), carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NOx) emissions. The findings revealed that adding 10% toluene by volume to diesel fuel prolonged the ignition delay due to the low cetane number, delayed the CA50, and reduced the ITE while increasing BSFC and CO, HC, and NOx emissions. In contrast, CeO2 nanoparticles improved combustion particularly at medium and high engine loads—through their catalytic effect, thereby increasing in-cylinder pressure, HRR, and ITE, reducing BSFC and CA50, and largely mitigating the adverse effects of toluene addition. In particular, the T10D90C120 fuel containing 120 ppm CeO2 demonstrated the most significant improvement among the additive-containing fuels, delivering an ITE value of 35.95% at a load of 21.97 Nm. Overall, CeO2 nanoparticles effectively improved the combustion characteristics of diesel–toluene blends.

Keywords

References

  1. Energy Institute. Statistical review of world energy 2026. 75th ed. Energy Institute; 2026.
  2. Mutlu B, Özyörük B. Evaluating biomass energy potential with multi-criteria decision methods: Insights for policy makers. Engineering Perspective. 2026;6(2):147-169. https://doi.org/10.64808/engineeringperspective.1789924
  3. Coşman S, Demir U, Çelebi S, Ateş S, Emen F. Combustion performance and emission effects of a novel palladium thiourea additive in a diesel engine with EGR. Fuel. 2027;428:140494. https://doi.org/10.1016/j.fuel.2026.140494
  4. International Energy Agency. CO2 emissions. In: Global Energy Review 2025 [Internet]. Paris: International Energy Agency; 2025 [cited 2026 Oct 4]. Available from: https://www.iea.org/reports/global-energy-review-2025/co2-emissions
  5. Ardebili SMS, Calam A, Solmaz H, Böğrek A, Haşimoğlu C. Improving the combustion process of a homogeneous charge compression ignition engine running with triple fuel blend using response surface methodology. J Braz Soc Mech Sci Eng. 2024;46(8):486. https://doi.org/10.1007/s40430-024-05060-0
  6. Demir U, Çelebi S, Arda E, Kocakulak T, Arslan TA. RSM-based investigation and optimization of ethanol port injection, EGR rate, engine load, and fuel type on combustion noise and vibration in a diesel engine. Heat Transf Res. 2026;57(10):1-30. https://doi.org/10.1615/HeatTransRes.2026062174
  7. Ciatti SA. Compression ignition engines – Revolutionary technology that has civilized frontiers all over the globe from the industrial revolution into the twenty-first century. Front Mech Eng. 2015;1:5. https://doi.org/10.3389/fmech.2015.00005
  8. Poorghasemi K, Saray RK, Solmaz H, Mousavi SM, Zehni A. Multi-dimensional 3D-CFD/chemical-kinetics modeling of natural gas–diesel RCCI engines: Combustion phasing, efficiency and emissions. Engineering Perspective. 2026;6(1):69-82. https://doi.org/10.64808/engineeringperspective.1802746

Details

Primary Language

English

Subjects

Internal Combustion Engines, Automotive Combustion and Fuel Engineering

Journal Section

Research Article

Publication Date

October 4, 2026

Submission Date

July 7, 2026

Acceptance Date

October 4, 2026

Published in Issue

Year 2026 Volume: 10 Number: 3

APA
Arslan, T. A., & Erçek, E. (2026). Experimental Investigation of Diesel Engine Characteristics Fueled with Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends. International Journal of Automotive Science And Technology, 10(3), 711-724. https://doi.org/10.30939/ijastech..1988706
AMA
1.Arslan TA, Erçek E. Experimental Investigation of Diesel Engine Characteristics Fueled with Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends. IJASTECH. 2026;10(3):711-724. doi:10.30939/ijastech.1988706
Chicago
Arslan, Turan Alp, and Emrah Erçek. 2026. “Experimental Investigation of Diesel Engine Characteristics Fueled With Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends”. International Journal of Automotive Science And Technology 10 (3): 711-24. https://doi.org/10.30939/ijastech. 1988706.
EndNote
Arslan TA, Erçek E (October 1, 2026) Experimental Investigation of Diesel Engine Characteristics Fueled with Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends. International Journal of Automotive Science And Technology 10 3 711–724.
IEEE
[1]T. A. Arslan and E. Erçek, “Experimental Investigation of Diesel Engine Characteristics Fueled with Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends”, IJASTECH, vol. 10, no. 3, pp. 711–724, Oct. 2026, doi: 10.30939/ijastech..1988706.
ISNAD
Arslan, Turan Alp - Erçek, Emrah. “Experimental Investigation of Diesel Engine Characteristics Fueled With Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends”. International Journal of Automotive Science And Technology 10/3 (October 1, 2026): 711-724. https://doi.org/10.30939/ijastech. 1988706.
JAMA
1.Arslan TA, Erçek E. Experimental Investigation of Diesel Engine Characteristics Fueled with Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends. IJASTECH. 2026;10:711–724.
MLA
Arslan, Turan Alp, and Emrah Erçek. “Experimental Investigation of Diesel Engine Characteristics Fueled With Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends”. International Journal of Automotive Science And Technology, vol. 10, no. 3, Oct. 2026, pp. 711-24, doi:10.30939/ijastech. 1988706.
Vancouver
1.Turan Alp Arslan, Emrah Erçek. Experimental Investigation of Diesel Engine Characteristics Fueled with Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends. IJASTECH. 2026 Oct. 1;10(3):711-24. doi:10.30939/ijastech. 1988706


International Journal of Automotive Science and Technology (IJASTECH) is published by Society of Automotive Engineers Turkey

by.png