Stability of Solid-State Sintered Li1.5Al0.5Ge1.5(PO4)3 Solid Electrolytes in Var-ious Mediums for All Solid-State Li-ion Batteries

Year 2020, Volume: 4 Issue: 4, 295 - 299, 31.12.2020

Kamil Burak Dermenci

https://doi.org/10.30939/ijastech..805061

Cited By: 4

Abstract

Solid electrolytes are strong candidates for next-generation Li-ion bat-teries for Electrical Vehicle (EV) applications. However, their usage is not widely spread because of their relatively poor ionic conductivity and high electrode/electrolyte interfacial resistance compared to their com-mercial counterparts, organic based liquid electrolytes. Sodium Superi-onic Conductor (NASICON) type solid electrolytes could be an option to overcome these problems. Li1.5Al0.5Ge1.5(PO4)3 (LAGP) stands forward among other NASICON type solid electrolytes with their easy synthesis and processing. Yet, their stability against various mediums remain un-known and needs to be enlightened. In this study, the stability of LAGP against water, air at 85°C and 1M LiOH solution was discussed. LAGP re-sults after sintering at 900°C for 3 hours showed impurity-free, highly dense structure with a restricted grain growth. Water and air aged sam-ples showed a dramatical reduction on grain boundary contribution of to-tal ionic conductivity whereas the sample aged at 1M LiOH solution ex-hibited both reduction in ionic conductivity and increase on grain boundary conductivity. The highest reduction on total ionic conductivity was observed on the sample aged in water. On the contrary, the sample aged in 1M LiOH solution resulted in a net increase on total ionic con-ductivity. The highest total conductivity of 4.3 x 10-4 S/cm was obtained from the sample aged in 1M LiOH. On the other hand, the sample aged the lowest conductivity – 1.8 x 10-4 S/cm – showed the lowest total con-ductivity of all samples.

Keywords

Li-ion batteries, Solid Electrolytes, Stability

Thanks

Author would like to thank A. Furkan Buluc and Furkan Gulbeyaz for their operational help on SEM images.

References

• Scrosati B. and Garche J. (2010). Lithium batteries: Status, prospects and future. J Power Sources, 195, 2419–2430.
• Xu K. (2014). Electrolytes and interphases in Li-ion batter-ies and beyond. Chem. Rev., 23, 11503–11618.
• Goodenough J.B. and Kim Y. (2010). Challenges for re-chargeable Li batteries. Chem. Mater., 22, 587–603.
• Feng J.K., Lu L. and Lai M.O. (2010). Lithium storage capability of lithium ion conductor Li1.5Al0.5Ge1.5(PO4)3. J Alloys Compd., 501, 255–258.
• Zheng F., Kotobuki M., Song S., Lai M.O., and Lu L. (2018). Review on solid electrolytes for all-solid-state lithi-um-ion batteries. J Power Sources, 389, 198–213.
• Berbano S.S., Guo J., Guo H., Lanagan M.T. and Randall C.A. (2017). Cold sintering process of Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte. J Am Ceram Soc., 100, 2123–2135.
• Thokchom J.S. and Kumar B. (2008). Composite effect in superionically conducting lithium aluminium germanium phosphate based glass-ceramic. J Power Sources., 185, 480–485.
• Xu X., Wen Z., Wu X., Yang X. and Gu Z. (2007). Lithium Ion-Conducting Glass?Ceramics of Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 ?xLi 2 O (x=0.0?0.20) with Good Electrical and Electrochemical Properties. J Am Ceram Soc., 90, 2802–2806.
• Kotobuki M. and Koishi M. (2019). Preparation of Li1.5Al0.5Ge1.5(PO4)3 solid electrolytes via the co-precipitation method. J Asian Ceram Soc. 7, 551–557.
• Yu S. and Siegel D.J. (2017). Grain Boundary Contribu-tions to Li-Ion Transport in the Solid Electrolyte Li 7 La 3 Zr 2 O 12 (LLZO). Chem Mater, 29, 9639–9647.
• Karthik K. and Murugan R. (2018). Lithium garnet based free-standing solid polymer composite membrane for re-chargeable lithium battery. J Solid State Electrochem., 22, 2989–2998.
• Jadhav H.S., Cho M.S., Kalubarme R.S., Lee J.S., Jung K.N., Shin K.H. and Park C.J. (2013). Influence of B2O3 addition on the ionic conductivity of Li1.5Al0.5Ge1.5(PO4)3 glass ceramics. J Power Sources, 241, 502–508.