Low-Velocity Stone Impact Simulation of Glass Fiber Reinforced Thermoplastics for Diesel Engine Oil Pans under Different Temperature Conditions

Year 2025, Volume: 9 Issue: 3, 417 - 426, 30.09.2025

Batuhan Türközü , Emre Demirci

https://doi.org/10.30939/ijastech..1755329

Abstract

As environmental regulations continue to evolve, lightweight and high-performance materials have gained increasing attention in the automotive industry. While the shift from metallic to polymer-based engine components contributes to improved fuel efficiency and lower emissions, such transitions also require careful assessment of structural durability under real-world conditions. In this study, a thermoplastic oil pan was developed with design features optimized for impact resistance, including longitudinal and transverse ribs, integrated baffles, and reinforced mounting surfaces. A finite element model of the oil pan was developed in Hypermesh and simulated using Altair Radioss to assess its performance under localized stone impacts, which were modeled using a 17 mm diameter, 6 g rigid sphere. Two impact scenarios—targeting ribbed and non-ribbed regions—were evaluated under three temperature conditions: −40 °C, 23 °C, and 100 °C. Five glass fiber–reinforced thermoplastic composites (PA6-GF30, PA66-GF30, PPA-GF30, PBT-GF30, and PA9T-GF30) were analyzed in terms of energy absorption, maximum local displacement, and damage behavior. The results showed that rib structures effectively reduced crack formation and localized stress, especially at lower temperatures. Performance depends on impact location, so no single material ranks best in all cases; ribbed regions tend to favor PA6/PA66, whereas non-ribbed regions can favor PPA/PBT. Although no physical tests were conducted, the material modeling was supported by experimental data in the literature. This study contributes to the growing body of knowledge on lightweight thermoplastic oil pans and offers a practical methodology for evaluating their impact performance under service-like conditions.

Keywords

Glass fiber reinforced thermoplastics , Impact resistance , Oil pan design , Automotive polymers , Stone impact , Temperature-dependent behavior

References

• [1] Joost WJ. Reducing vehicle weight and improving US energy efficiency using integrated computational materials engineering. JOM. 2012;64(9):1032-1038. https://doi.org/10.1007/s11837-012-0424-z
• [2] Sinha M, Tyagi RK, Bajpai PK. Weight reduction of structural members for ground vehicles by the introduction of FRP compo-site and its implications. In: Proceedings of the International Con-ference on Modern Research in Aerospace Engineering: MRAE-2016; 2018 Feb; Singapore. Singapore: Springer; 2018. p.277-290. https://doi.org/10.1007/978-981-10-5849-3_28
• [3] Vaitheeswaran T, Jayakumar J, Periyasamy P, Anandan R, Ran-jithkumar R, Nageswaran M. Nano silicon carbide content on functional behaviour of polypropylene composites featured with basalt fiber for automotive material. Int J Automot Sci Technol. 2025;9(2):269-275. https://doi.org/10.30939/ijastech.1674906
• [4] Jessberger T, Ritter S, Teschner M. Plastic oil pan for the reduc-tion of costs, weight and CO2. MTZ Worldw. 2008;69(10):46-49. https://doi.org/10.1007/BF03226920
• [5] Zabirov A, Schleser M, Schernus C, Kayacan C. LeiMot–lightweight engine helps reducing CO2 emissions. Transp Res Procedia. 2023;72:1021-1028. https://doi.org/10.1016/j.trpro.2023.11.531
• [6] Spisák B, Beleznai R. Design and analysis of composite oil pan for automotive vehicle. In: Vehicle and Automotive Engineering. Cham: Springer International Publishing; 2018. p. 301–314. https://doi.org/10.1007/978-3-319-75677-6_25
• [7] Tekkaya AE, Min J. Special issue on automotive lightweight. Automot Innov. 2020;3:193‑194. https://doi.org/10.1007/s42154-020-00117-x
• [8] Samin SAN, Hossen S, Rahman KMM, Gosh U. Lightweighting of a vehicle steering uprights via structural-based design and FEA analysis. Eng Perspect. 2024;4(4):157-170. http://dx.doi.org/10.29228/eng.pers.78029
• [9] Nassar M, Polat K, Koçlu Y, Topaç MM. Design and optimisa-tion of a double wishbone independent suspension system for an L6 electric vehicle: A response surface methodology based design application. Eng Perspect. 2025;5(1):21-30. http://dx.doi.org/10.29228/eng.pers.79569
• [10] Njuguna J, (Ed.). Lightweight composite structures in transport: design, manufacturing, analysis and performance. Cambridge: Woodhead Publishing; 2016. https://doi.org/10.1016/C2014-0-02646-9
• [11] Chidambaranathan B, Raghavan S, Soundararajan G. Review of mechanical properties of basalt fibre-reinforced polymer compo-sites for automotive applications. SAE Technical Paper 2024-01-5246; 2025. https://doi.org/10.4271/2024-01-5246
• [12] Şimşir E, Bayrakçeken H. Examination of mechanical tests of CFRP composite material with different orientation angles used in the automotive industry. Int J Automot Sci Technol. 2024;8(1):132–141. https://doi.org/10.30939/ijastech..1399886
• [13] Skosana SJ, Khoathane C, Malwela T. Driving towards sustaina-bility: a review of natural fiber reinforced polymer composites for eco-friendly automotive light-weighting. J Thermoplast Compos Mater. 2025;38(2):754‑780. https://doi.org/10.1177/08927057241254324
• [14] Olhan S, Khatkar V, Behera BK. Textile-based natural fibre-reinforced polymeric composites in automotive lightweighting. J Mater Sci. 2021;56(34):18867‑18910. https://doi.org/10.1007/s10853-021-06509-6
• [15] Mohammadi H, Ahmad Z, Mazlan SA, Faizal Johari MA, Siebert G, Petrů M, et al. Lightweight glass fiber‑reinforced polymer composite for automotive bumper applications: a review. Poly-mers. 2022;15(1):193. https://doi.org/10.3390/polym15010193
• [16] Güler T, Demirci E, Yıldız AR, Yavuz U. Lightweight design of an automobile hinge component using glass fiber polyamide com-posites. Mater Test. 2018;60(3):306‑310. https://doi.org/10.3139/120.111152
• [17] Meshram SD, Gupta S, Kulthe M, Kandasubramanian B. The role of additive manufacturing in the study of carbon fiber‑reinforced polymer composite. Polym Bull. 2024;81(17):15469‑15511. https://doi.org/10.1007/s00289-024-05476-7
• [18] Yan L, Xu H. Lightweight composite materials in automotive engineering: state‑of‑the‑art and future trends. Alexandria Eng J. 2025;118:1‑10. https://doi.org/10.1016/j.aej.2024.12.002
• [19] Epple S, Bonten C. Thermoplastic composites for high volume production. In: 16th Internationales Stuttgarter Symposium: Au-tomobil‑ und Motorentechnik; 2016 Apr; Wiesbaden, Germany. Wiesbaden: Springer Fachmedien Wiesbaden; 2016. p.227‑238. https://doi.org/10.1007/978-3-658-13255-2_18
• [20] Van Basshuysen R, Schäfer F, editors. Internal Combustion Engine Handbook: basics, components, systems, and perspectives. 2nd ed. Warrendale, PA: SAE International; 2016.
• [21] Stewart R. Rebounding automotive industry welcome news for FRP. Reinf Plast. 2011;55(1):38‑44. https://doi.org/10.1016/S0034-3617(11)70036-4
• [22] Özdilli Ö. An Investigation of the Effects of a Sheet Material Type and Thickness Selection on Formability in the Production of the Engine Oil Pan with the Deep Drawing Method. Int J Au-tomot Sci Technol. 2020;4(4):198‑205. https://doi.org/10.30939/ijastech..773926
• [23] Abidin NZ, Sultan MTH, Shah AUM, Safri SNA. Charpy and Izod impact properties of natural fibre composites. IOP Conf Ser Mater Sci Eng. 2019;670(1):012031. https://doi.org/10.1088/1757-899X/670/1/012031
• [24] Youn JY, Kim SH, Jin YS. A study on the impact resistance of plastic underbody parts. SAE Int J Mater Manuf. 2016;9(3):776‑780. https://doi.org/10.4271/2016-01-0515
• [25] Mouti Z, Westwood K, Long D, Njuguna J. Finite element analy-sis of glass fiber‑reinforced polyamide engine oil pan subjected to localized low velocity impact from flying projectiles. Steel Res Int. 2012;83(10):957‑963. https://doi.org/10.1002/srin.201100299
• [26] Raponi E, Fiumarella D. Experimental analysis and nu-merical optimization of a thermoplastic composite in crashworthi-ness. IOP Conf Ser Mater Sci Eng. 2021;1038(1):012030. https://doi.org/10.1088/1757-899X/1038/1/012030