Vibration Behavior of Composite Materials Produced by Waste Metal Recycling

Year 2019, , 139 - 141, 30.11.2019

Aydın Güneş , Erdi Gülbahçe , Emin Salur , Abdullah Aslan , Ömer Sinan Şahin

https://doi.org/10.22399/ijcesen.374400

Cited By: 3

Abstract

In this study, waste
metal chips were transformed into metal matrix composites by isostatic hot
pressing and the vibrational behavior of these composite materials was
investigated. Bronze chips (CuSn10) was used as a matrix component and
spheroidal cast iron (GGG40) chips were used as reinforcement component. The
metal matrix composites are produced with different GGG40 contents as
40%-30%-20% and 10%. Metal chips were pressed at pressure of 170 MPa and a
temperature of 450 °C during production. The results of natural frequency and
modal stiffness were evaluated on the basis of mixture ratios by applying the
impact hammer test to the metal matrix composite materials produced.

Keywords

Recycle, Vibration, Metal matrix composite

References

• [1] Gronostajski J.Z.,Kaczmar J.W., Marciniak H., Matuszak A., Direct Recycling of Aluminum Chips into Extruded Product, Journal of Materials Processing Technology, 64 (1997), 149-156.
• [2] Aslan A, Sahin O.S, Salur E., Gunes A., Karadag H. B., Akdemir A, 2015 A New Method for Recycling of Metal Chips, Journal of Selçuk University Natural and Applied Science Vol:4 No:1
• [3]Abdullah Aslan, Aydin Güneş, Emin Salur, Ömer Sinan Şahin, Hakan Burak Karadağ, Ahmet Akdemir, Mechanical Properties and Microstructure of Composites Produced by Recycling Metal Chips, International Journal of Minerals, Metallurgy, and Materials, 25 (9), 1070-1079, 2018.
• [4]Abdullah Aslan, Emin Salur, Aydın Güneş, Ömer Sinan Şahin, Hakan Burak Karadağ, Ahmet Akdemir, The mechanical properties of composite materials recycled from waste metallic chips under different pressures”, International Journal of Environmental Science and Technology, 16 (9), 5259-5266, 2019.
• [5] German, R.M. Toz Metalürjisi ve Parçacıklı Malzeme İşlemleri, Çeviri Editörleri: S. Sarıtaş, M. Türker, N. Durlu, Ankara, pp:38, 2007.
• [6]Ömer Sinan Şahin, Aydin Güneş, Abdullah Aslan, Emin Salur, Hakan Burak Karadağ, Ahmet Akdemir, Low Velocity Impact Behavior of Porous Metal Matrix Composites Produced by Recycling of Bronze and Iron Chips, Ir. Journal of Science and Tech., Transactions of Mechanical Engineering, 43, 53-60, 2019.
• [7] Emin Salur, Abdullah Aslan, Mustafa Kuntoğlu, Aydın Güneş, Ömer Sinan Şahin, “Experimental Study and Analysis of Machinability Characteristics of Metal Matrix Composites During Drilling”, Composites Part B: Engineering 166, 401-413, 2019.
• [8] Abdullah Aslan, Emin Salur, Aydin Güneş, Ömer Sinan Şahin, Hakan Burak Karadağ, Ahmet Akdemir, Productıon And Mechanıcal Charecterızatıon of Prismatic Shape Machine Element By Recycling of Bronze And Cast Iron Chips, Journal of the Faculty of Engineering and Architecture of Gazi University, 33 (3), 1013-1027, 2018.
• [9] Hu, M.,Ji, Z., Chen, X., Zhang, Z., Effect of chip size on mechanical property and microstructure of AZ91D magnesium alloy prepared by solid state recycling, Materials Characterization, 59, 385-389, 2008.
• [10] Mindivan, H., Kayalı, E.S., Çimenoğlu, H., Recycling Of Aluminum Machining Chips, 12th International Materilas Symposium (IMSP’2008), 109-113, Denizli/Turkey, 2008.
• [11] Piratelli-Filho, A., Levy-Neto, F., Behavior of Granite-Epoxy Composite Beams Subjected to Mechanical Vibrations, Materials Research, 13, 497-503, 2010