Microstructure & Tribological Performance of Alumina-3wt% Titania Coatings Produced by APS

Year 2020, Volume: 6 Issue: 2, 88 - 91, 31.07.2020

Mokhtar Djendel , Omar Allaouı Mourad Maazouz Rabah Boubaaya

https://doi.org/10.22399/ijcesen.665097

Abstract

Al2O3-3wt%TiO2 coatings were deposited by atmospheric plasma spraying (APS). The microstructure and phase composition of the coatings were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The wear and friction properties of Alumina–3wt.% titania coatings against a steel ball under dry friction conditions were examined. The microstructure result and the phase of the spray coating is analyzed and presented. In addition, wear behavior of the sprayed coating are evaluated for final coating performance. , test results showed that increasing some process parameters increased the performance of mechanical properties of coating and gave the lowest friction coefficient value of coating.

Keywords

Plasma spray, , Alumina–3wt.% Titania Coatings, , Microstructure, , XRD, , Wear behavior

References

• [1] L. Pawlowsky, The Science and Engineering of Thermal Spray Coatings, John Wiley & Sons, New York, 1995.
• [2] P. Fauchais, A. Vardelle, B. Dussoubs, in: Thermal Spray 2001: New Surfaces for a New Millennium, Eds. C.C. Berndt, K.A. Khor, E.F. Lugscheider, ASM International, Materials Park (OH) 2001, p. 1.
• [3] M. Djendel, O. Allaoui, R. Boubaaya, Characterization of Alumina–Titania Coatings Produced by Atmospheric Plasma Spraying on 304 SS Steel. Acta Phys. Pol. A 132, 538 Vol. 132(2017),DOI: 10.12693/APhysPolA.132.538
• [4] Günen, Ali. (2016). Micro-Abrasion Wear Behavior of Thermal-Spray-Coated Steel Tooth Drill Bits. Acta Physica Polonica A, DOI: 10.12693/APhysPolA.130.217
• [5] H. Ageorges, P. Ctibor, Comparison of the structure and wear resistance of Al2O3–13wt.%TiO2 coatings made by GSP and WSP plasma processwith two different powders, Surf. Coat. Technol. 202 (18) (2008) 4362–4368. DOI: 10.1016/j.surfcoat.2008.04.010
• [6] L. Shaw, D. Goberman, M. Gell, S. Jiang, Y. Wang, T.D. Xiao, P. Strutt, The dependency of microstructure and properties of nanostructured coatings on plasma spray conditions, Surf. Coat. Technol. 130 (2000) 1–8. DOI: 10.1016/S0257-8972(00)00673-3
• [7] E.H. Jordan, M. Gell, Y.H. Sohn, D. Goberman, L. Shaw, S. Jiang, M.Wang, T.D. Xiao, Y. Wang, P. Strutt, Fabrication and evaluation of plasma sprayed nanostructured Alumina–Titania coatings with superior properties, Mater. Sci. Eng. A301 (2001) 80–89,https://doi.org/10.1016/S0921-5093(00)01382-4
• [8] İ.H. Karahan, Effect of Borax Pentahydrate Addition to Acid Bath on the Microstructure and Corrosion Resistance of Zn-Co Coating. Acta Phys. Pol. A Vol.128, B-432 (2015). DOI: 10.12693/APhysPolA.128.B-432
• [9] Djeghdjough Mohamed, Bacha Nacer eddine and Dilmi Nacer, Effect of Substrate Preheating, Roughness and Particles Size on Splat Morphology of Thermal Sprayed Coatings. Proc. International Conference on Computational and Experimental Science and Engineering (IJCESEN) Vol. 1-No.1 pp. 16-18(2015).
• [10] Rahim, M.S.A.,Hayati, S.N. and Bakir, H.L. (2009) ‘Plasma spray ceramic coating and measurement of developed coating behaviour’, Int. J. Precision Technology, Vol. 1, No. 2, pp.163–172. DOI: 10.1504/IJPTECH.2009.026375
• [11] M. Djendel, O. Allaoui, Abderrazak Bouzid. Effect of Air Plasma Spraying Parameters on the Quality of Coating. Proc. International Journal of Computational and experimental Science and Engineering (IJCESEN) Vol.2 –No. 2 (2016)pp.1-5.
• [12] Lin, X., Zeng, Y. and Ding, C.X. (2003) ‘Microstructure of alumina -3wt.% titania coating by plasma spraying with nanostructure powders’, Materials Science and Engineering, Vol.A.357,pp.228.234,https://doi.org/10.1016/S0955-2219(03) 00254-1
• [13] Haghighatzadeh, Azadeh & Mazinani, Babak & abdolahpour salari, Maryam. (2017). Coating of Ordered Large-Pore Mesoporous Silica with TiO2 Nanoparticles and Evaluation of Its Photocatalytic Activity. Acta Physica Polonica A. DOI: 10.12693/APhysPolA.132.420.