Modal Analysis of Micro and Nanowires Using Finite Element Softwares

Abstract

The aim of this work is to represent a quick and truthful modality to obtain frequencies of microwires and nanowires which are widely used in nanosensors, nanocircuit and many more susceptible scientific areas.  In this paper, modal analysis of micro and nano sized wires is investigated using COMSOL software. To obtain first ten mode shapes and eigenfrequencies of silicon carbide nanowire, thirty-nine modes is calculated. Results are given in figures captured from the software.

Keywords

• Modal analysis,microwires,nanowires,SiCNW,COMSOL

References

1. [1] Civalek, Ö., Demir, C., Buckling and bending analyses of cantilever carbon nanotubes using the euler-bernoulli beam theory based on non-local continuum model. Asian Journal of Civil Engineering, 12(5), 651-661, 2011.
2. [2] Emsen, E., Mercan, K., Akgöz, B., Civalek, Ö., Modal analysis of tapered beam-column embedded in Winkler elastic foundation. International Journal of Engineering & Applied Sciences, 7(1), 1-11, 2015.
3. [3] Demir, Ç., Akgöz, B., Erdinç, M.C., Mercan, K., Civalek, Ö., Elastik bir ortamdaki grafen tabakanın titreşim hesabı. Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 32(2), 2017.
4. [4] Demir, C., Mercan, K., Numanoglu, H.M., Civalek, O., Bending response of nanobeams resting on elastic foundation. Journal of Applied and Computational Mechanics, 4(2), 105-114, 2018.
5. [5] Mercan, K., Civalek, Ö., Buckling analysis of silicon carbide nanotubes (SiCNTs). International Journal of Engineering & Applied Sciences, 8(2), 101-108, 2016.
6. [6] Avcar, M., Effects of rotary inertia shear deformation and non-homogeneity on frequencies of beam. Structural Engineering and Mechanics, 55(4), 871-884, 2015.
7. [7] Avcar, M., Effects of Material Non-Homogeneity and Two Parameter Elastic Foundation on Fundamental Frequency Parameters of Timoshenko Beams. Acta Physica Polonica A, 130(1), 375-378, 2016.
8. [8] Avcar, M., Mohammed, W.K.M., Free vibration of functionally graded beams resting on Winkler-Pasternak foundation. Arabian Journal of Geosciences, 11(10), 2018.

9. [9] Aktir, Y., Brunel, J.F., Dufrenoy, P., Mahe, H., Three-dimensional finite element model of an automotive clutch for analysis of axial vibrations. Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, 230(10), 1324-1337, 2016.
10. [10] Kim, B., Finite Element Modeling and Parametric Study of an Automotive V-belt Pulley for Durability Improvement. International Journal of Precision Engineering and Manufacturing, 16(7), 1517-1524, 2015.
11. [11] Kim, H.Y., Park, J.K., Lee, M.G., Phase transformation-based finite element modeling to predict strength and deformation of press-hardened tubular automotive part. International Journal of Advanced Manufacturing Technology, 70(9-12), 1787-1801, 2014.
12. [12] Le Henaff, F., Azzopardi, S., Woirgard, E., Youssef, T., Bontemps, S., Joguet, J., Lifetime Evaluation of Nanoscale Silver Sintered Power Modules for Automotive Application Based on Experiments and Finite-Element Modeling. Ieee Transactions on Device and Materials Reliability, 15(3), 326-334, 2015.
13. [13] Pisaturo, M., Senatore, A., Simulation of engagement control in automotive dry-clutch and temperature field analysis through finite element model. Applied Thermal Engineering, 93, 958-966, 2016.
14. [14] Toros, S., Altinel, K., Contribution of functionally graded material modelling on finite element simulation of rod end parts in automotive steering system. Journal of Mechanical Science and Technology, 30(7), 3137-3141, 2016.
15. [15] Wong, P.K., Xie, Z.C., Zhao, J., Xu, T., He, F., Analysis of automotive rolling lobe air spring under alternative factors with finite element model. Journal of Mechanical Science and Technology, 28(12), 5069-5081, 2014.
16. [16] Civalek, Ö., Geometrically non-linear static and dynamic analysis of plates and shells resting on elastic foundation by the method of polynomial differential quadrature (PDQ). 2004, Elazig: Firat University.
17. [17] Civalek, O., Finite Element analysis of plates and shells. 1998, Elazığ: Fırat University
18. [18] Civalek, O., Demir, C., A simple mathematical model of microtubules surrounded by an elastic matrix by nonlocal finite element method. Applied Mathematics and Computation, 289, 335-352, 2016.
19. [19] Jian, F.J., Jayas, D.S., Characterization of isotherms and thin-layer drying of red kidney beans, Part II: Three-dimensional finite element models to estimate transient mass and heat transfer coefficients and water diffusivity. Drying Technology, 36(14), 1707-1718, 2018.
20. [20] Mu, L.Z., Shao, H.W., He, Y., Oda, T., Jia, X.M., Construction of Anatomically Accurate Finite Element Models of the Human Hand and a Rat Kidney. Journal of Mechanics in Medicine and Biology, 11(5), 1141-1164, 2011.
21. [21] Snedeker, J.G., Bajka, M., Hug, J.M., Szekely, G., Niederer, P., The creation of a high-fidelity finite element model of the kidney for use in trauma research. Journal of Visualization and Computer Animation, 13(1), 53-64, 2002.
22. [22] Yates, K.M., Untaroiu, C.D., Finite element modeling of the human kidney for probabilistic occupant models: Statistical shape analysis and mesh morphing. Journal of Biomechanics, 74, 50-56, 2018.
23. [23] Das, A.K., Chatterjee, S., Finite element method-based modelling of flow rate and temperature distribution in an oil-filled disc-type winding transformer using COMSOL multiphysics. Iet Electric Power Applications, 11(4), 664-673, 2017.
24. [24] AB, w.c.c.C., COMSOL Multiphysics®. 2018: Stockholm, Sweden.
25. [25] Mercan, K., Civalek, O., Buckling analysis of Silicon carbide nanotubes (SiCNTs) with surface effect and nonlocal elasticity using the method of HDQ. Composites Part B-Engineering, 114, 35-45, 2017.
26. [26] Mercan, K., Numanoglu, H.M., Akgoz, B., Demir, C., Civalek, O., Higher-order continuum theories for buckling response of silicon carbide nanowires (SiCNWs) on elastic matrix. Archive of Applied Mechanics, 87(11), 1797-1814, 2017.