Year 2017,
Volume: 2 Issue: 1, 3 - 7, 01.01.2017
Abstract
Energy demand, especially in the industrial sector, is rapidly increasing in our country. Due to the inadequacy of energy production to meet demand and the limit of new energy sources, it is becoming compulsory to import energy. This demonstrates the necessity of more efficient use of energy in all sectors. The energy sector is used intensively in the industrial sector and the highest consumption values are achieved according to other sectors. For this reason, it has become a necessity to attach importance to energy management and energy efficiency in the industry. Energy use is an important issue in the feed plants. Over the past decade, the significant increase in energy costs has contributed to reducing plant profit margins. Since profit margins are generally relatively low in wheat processing plants, efficient management of energy consumption has become a necessity instead of preference. A better efficient utilization of fuel, electricity, thermal energy and labor are the major components of manufacturing cost in feed plants
References
- Akdeniz, R. C. ve Boyar, S., 2002, Karma Yem Üretim Makinalarının Uygun Kullanımı. 2002 Yılı Hayvancılık Grubu Bilgi Alışverişi Toplantısı Bildiri Kitabı, T. C. Tarım ve Köyişleri Bakanlığı Ege Tarımsal Araştırma Enstitüsü Müdürlüğü, Yayın No: 106, Menemen /İzmir, s:147-166.
- Akdeniz, R. C., Ak, İ. ve Boyar, S.,2005, Türkiye Karma Yem Endüstrisi ve Sorunları. VI. Türkiye Ziraat Mühendisliği Teknik Kongresi. TMMOB Ziraat Mühendisleri Odası (ZMO) 03-07 Ocak 2005, Cilt:2, Ankara, s.935-959.
- Boyar, S. 2006. A Research on Determination and Development Possibilities of Energy Efficiency in Mixed Feed Industry (Case studies in two factories). Ph.D. Thesis, Agricultural Machinery Dept., Institute of Natural and Applied Sciences, Ege University, Bornova, Izmir, 416 p.
- Boyar, S., Hepbasli, A., & Akdeniz, R. C. (2012). Energy utilization needs in Turkish mixed feed industry. Journal of Food, Agriculture & Environment, 10(3&4), 528- 533.
- Bunse, K., Vodicka, M., Schönsleben, P., Brülhart, M., & Ernst, F. O. (2011). Integrating energy efficiency performance in production management–gap analysis between industrial needs and scientific literature. Journal of Cleaner Production, 19(6), 667- 679.
- Carbon Trust (2004) Food and Drink Fact Sheet, GIL149, London, The Carbon Trust available from; www.carbontrust.co.uk/publications.
- Carbon Trust, 2008. Automatic Monitoring and Targeting Equipment: A Guide to Equipment Eligible for Enhanced Capital Allowances. Report number ECA756, available from: www.carbontrust.co.uk (accessed 04.012.16)
- Ergül, M., 1994, Karma Yemler ve Karma Yem Teknolojisi. Ders Kitabı. Ege Üniversitesi Ziraat Fakültesi Yayınları No:384. II. Basım. Bornova- İzmir, 280s.
- Kedici Ö. Fizik Yük. Müh. “Enerji Yönetimi” Elektrik İşleri Etüd İdaresi Genel Müdürlüğü Enerji Kaynakları Etüd Dairesi Başkanlığı 1993 Ankara
- SÖĞÜT, Z., & OKTAY, Z. SANAYİ SEKTÖRÜNDE ENERJİ TARAMASININ ENERJİ VERİMLİLİĞİNE ETKİSİ VE BİR UYGULAMA.
- Swat, M., Brünnet, H., & Bähre, D. (2014). Selecting manufacturing process chains in the early stage of the product engineering process with focus on energy consumption. In Technology and Manufacturing Process Selection (pp. 153-173). Springer London.
- Wang, Lijun, Weller, Curtis L, Jones, David D, & Hanna, Milford A. (2008). Contemporary issues in thermal gasification of biomass and its application to electricity and fuel production. Biomass and Bioenergy, 32(7), 573-581. Wang, Lijun. (2014). Energy efficiency technologies for sustainable food processing. Energy efficiency, 7(5), 791-810.
- Warechowska, Małgorzata. (2014). Some physical properties of cereal grain and energy consumption of grinding. Agricultural Engineering, 1(149), 239-249.
- Xenergy, Inc. 1998. United States Industrial Electric Motor Systems Market Opportunities Assessment. U.S. Department of Energy’s Office of Industrial Technology and Oak Ridge National Laboratory
Year 2017,
Volume: 2 Issue: 1, 3 - 7, 01.01.2017
Abstract
References
- Akdeniz, R. C. ve Boyar, S., 2002, Karma Yem Üretim Makinalarının Uygun Kullanımı. 2002 Yılı Hayvancılık Grubu Bilgi Alışverişi Toplantısı Bildiri Kitabı, T. C. Tarım ve Köyişleri Bakanlığı Ege Tarımsal Araştırma Enstitüsü Müdürlüğü, Yayın No: 106, Menemen /İzmir, s:147-166.
- Akdeniz, R. C., Ak, İ. ve Boyar, S.,2005, Türkiye Karma Yem Endüstrisi ve Sorunları. VI. Türkiye Ziraat Mühendisliği Teknik Kongresi. TMMOB Ziraat Mühendisleri Odası (ZMO) 03-07 Ocak 2005, Cilt:2, Ankara, s.935-959.
- Boyar, S. 2006. A Research on Determination and Development Possibilities of Energy Efficiency in Mixed Feed Industry (Case studies in two factories). Ph.D. Thesis, Agricultural Machinery Dept., Institute of Natural and Applied Sciences, Ege University, Bornova, Izmir, 416 p.
- Boyar, S., Hepbasli, A., & Akdeniz, R. C. (2012). Energy utilization needs in Turkish mixed feed industry. Journal of Food, Agriculture & Environment, 10(3&4), 528- 533.
- Bunse, K., Vodicka, M., Schönsleben, P., Brülhart, M., & Ernst, F. O. (2011). Integrating energy efficiency performance in production management–gap analysis between industrial needs and scientific literature. Journal of Cleaner Production, 19(6), 667- 679.
- Carbon Trust (2004) Food and Drink Fact Sheet, GIL149, London, The Carbon Trust available from; www.carbontrust.co.uk/publications.
- Carbon Trust, 2008. Automatic Monitoring and Targeting Equipment: A Guide to Equipment Eligible for Enhanced Capital Allowances. Report number ECA756, available from: www.carbontrust.co.uk (accessed 04.012.16)
- Ergül, M., 1994, Karma Yemler ve Karma Yem Teknolojisi. Ders Kitabı. Ege Üniversitesi Ziraat Fakültesi Yayınları No:384. II. Basım. Bornova- İzmir, 280s.
- Kedici Ö. Fizik Yük. Müh. “Enerji Yönetimi” Elektrik İşleri Etüd İdaresi Genel Müdürlüğü Enerji Kaynakları Etüd Dairesi Başkanlığı 1993 Ankara
- SÖĞÜT, Z., & OKTAY, Z. SANAYİ SEKTÖRÜNDE ENERJİ TARAMASININ ENERJİ VERİMLİLİĞİNE ETKİSİ VE BİR UYGULAMA.
- Swat, M., Brünnet, H., & Bähre, D. (2014). Selecting manufacturing process chains in the early stage of the product engineering process with focus on energy consumption. In Technology and Manufacturing Process Selection (pp. 153-173). Springer London.
- Wang, Lijun, Weller, Curtis L, Jones, David D, & Hanna, Milford A. (2008). Contemporary issues in thermal gasification of biomass and its application to electricity and fuel production. Biomass and Bioenergy, 32(7), 573-581. Wang, Lijun. (2014). Energy efficiency technologies for sustainable food processing. Energy efficiency, 7(5), 791-810.
- Warechowska, Małgorzata. (2014). Some physical properties of cereal grain and energy consumption of grinding. Agricultural Engineering, 1(149), 239-249.
- Xenergy, Inc. 1998. United States Industrial Electric Motor Systems Market Opportunities Assessment. U.S. Department of Energy’s Office of Industrial Technology and Oak Ridge National Laboratory
There are 14 citations in total.
Details
| Primary Language | English |
|---|---|
| Journal Section | Research Article |
| Authors | |
| Publication Date | January 1, 2017 |
| Published in Issue | Year 2017 Volume: 2 Issue: 1 |
IMPORTANT NOTES
No part of the material protected by this copyright may be reproduced or utilized in any form or by any means, without the prior written permission of the copyright owners, unless the use is a fair dealing for the purpose of private study, research or review. The authors reserve the right that their material can be used for purely educational and research purposes. All the authors are responsible for the originality and plagiarism, multiple publication, disclosure and conflicts of interest and fundamental errors in the published works.
*Please note that All the authors are responsible for the originality and plagiarism, multiple publication, disclosure and conflicts of interest and fundamental errors in the published works. Author(s) submitting a manuscript for publication in IJEES also accept that the manuscript may go through screening for plagiarism check using IThenticate software. For experimental works involving animals, approvals from relevant ethics committee should have been obtained beforehand assuring that the experiment was conducted according to relevant national or international guidelines on care and use of laboratory animals. Authors may be requested to provide evidence to this end.
**Authors are highly recommended to obey the IJEES policies regarding copyrights/Licensing and ethics before submitting their manuscripts.
Copyright © 2024. AA. All rights reserved