Research Article
BibTex RIS Cite
Year 2021, Volume: 6 Issue: 2, 23 - 37, 31.10.2021

Abstract

References

  • 1. Chitte P, Jadhav PK, and Bansode SS., Statistic and dynamic analysis of typical wing structure of aircraft using Nastran, International Journal of Application or Innovation in Engineering & Management, 2, 7, 2013.
  • 2. Doğru, M. H. 2017. Investigation of Velocity Distribution and Turbulent Energy for the Different Tip Shaped Projectiles. Çukurova University Journal of the Faculty of Engineering and Architecture, 32(3), 39-46.
  • 3. Kevadiya M and Vaidya HA., 2D analysis of NACA 4412 airfoil, International Journal of Innovative Research in Science, Engineering and Technology, 2, 5,2013.
  • 4. Petrilli J, Paul R, Gopalarathnam A, and Frink NT., A CFD Database for Airfoils and Wings at Post-Stall Angles of Attack, 31st AIAA Applied Aerodynamics Conference, Fluid Dynamics and Co-located Conferences, 2013.
  • 5. Hossain S, Raiyan MF, Akanda MNU, and Jony NH., A comparative flow analysis of NACA 6409 and NACA 4412 aerofoil, International Journal of Research in Engineering and Technology, 03, 10, 2014.
  • 6. Patel KS, Patel SB, Patel UB, and Ahuja AP., CFD analysis of an aerofoil, International Journal of Engineering Research, 3 (3), 154-158, 2014.
  • 7. Triet NM, Viet NN, and Thang P M., Aerodynamic Analysis of Aircraft Wing, VNU Journal of Science: Mathematics – Physics, 31, 2, 2015.
  • 8. Kavya G and Reddy BCR., Design and Finite Element Analysis of Aircraft Wing Using Ribs and Spars, International Journal & Magazine of Engineering Technology, Management and Research, 2, 11, 2015.
  • 9. Kumar BSA, Ramalingaiah, Manjunath S, and Ganganna R., Computational Investigation of Flow Separation over Naca 23024 Airfoil at 6 Million Free Stream Reynolds Number, International Journal of Science, Technology and Society, 3, 6, 2015.
  • 10. Göv İ and Korkmaz Ü., Comparison of Aerodynamic Performance of NACA 4412 and S809 Airfoil, International Mechanical Engineering and Technologies Conference, 183-188, 2016.
  • 11. Göv, I., Dogru, M. H., & Korkmaz, U. 2019. Improvement of the aerodynamic performance of NACA 4412 using the adjustable airfoil profile during the flight. Journal of The Faculty of Engineering and Architecture of Gazi University, 34(2), 1110-1125.
  • 12. Korkmaz Ü. Design of Adjustable Airfoil to Delay Stall [M.S. thesis], The Institute for Graduate Studies in Natural and Applied Sciences, Gaziantep University 2018.
  • 13. Korkmaz Ü, Göv İ, Doğru MH. 2020. Aerodynamic Analyses of Naca 63-215. The International Journal of Energy and Engineering Sciences, 5 (2), 156-166 14. Göv İ, Doğru MH. 2020. Aerodynamic Optimization of Naca 0012 Airfoil. The International Journal of Energy and Engineering Sciences, 5 (2), 146-155 15. Thibert JJ, Reneaux J, Moens F, and Priest J., ONERA activities on high lift devices for transport aircraft, Aeronautical Journal, 99, 395–411, 1995.
  • 16. Spalart, P. R. and Allmaras, S.R., A One-Equation Turbulence Model for Aerodynamic Flows. Recherche Aerospatiale, 1, 5-21, 1994.
  • 17. http://airfoiltools.com/polar/details?polar=xf-n63215-il-50000-n5, 2020.

IMPROVEMENT OF AERODYNAMIC PERFORMANCE OF AN AIRCRAFT USING MORPHING WING

Year 2021, Volume: 6 Issue: 2, 23 - 37, 31.10.2021

Abstract

The aerodynamic performance of an aircraft directly affects the operating cost of the aircraft. The aerodynamic performance can be defined as the Cl/Cd ratio. To decrease operating cost Cl/Cd ratio must be increased. The main factor affecting the Cl/Cd ratio is the airfoil. Hence in this study, focused on a morphing airfoil during the flight to obtain maximum Cl/Cd ratio at a various angle of attack values. 2D CFD analysis is used in this study based on NACA63-215 airfoil and a new NACA36-215_1 airfoil which is modified NACA63-215. In analyses Cl/Cd ratio and flow separation were investigated as the performance parameters. At the end of the study, it was seen that the NACA63-215 airfoil should be used between 110-170 angle of attack, NACA63-215_1 should be used between 00-100, 180-230 angle of attack, to obtain maximum performance.

References

  • 1. Chitte P, Jadhav PK, and Bansode SS., Statistic and dynamic analysis of typical wing structure of aircraft using Nastran, International Journal of Application or Innovation in Engineering & Management, 2, 7, 2013.
  • 2. Doğru, M. H. 2017. Investigation of Velocity Distribution and Turbulent Energy for the Different Tip Shaped Projectiles. Çukurova University Journal of the Faculty of Engineering and Architecture, 32(3), 39-46.
  • 3. Kevadiya M and Vaidya HA., 2D analysis of NACA 4412 airfoil, International Journal of Innovative Research in Science, Engineering and Technology, 2, 5,2013.
  • 4. Petrilli J, Paul R, Gopalarathnam A, and Frink NT., A CFD Database for Airfoils and Wings at Post-Stall Angles of Attack, 31st AIAA Applied Aerodynamics Conference, Fluid Dynamics and Co-located Conferences, 2013.
  • 5. Hossain S, Raiyan MF, Akanda MNU, and Jony NH., A comparative flow analysis of NACA 6409 and NACA 4412 aerofoil, International Journal of Research in Engineering and Technology, 03, 10, 2014.
  • 6. Patel KS, Patel SB, Patel UB, and Ahuja AP., CFD analysis of an aerofoil, International Journal of Engineering Research, 3 (3), 154-158, 2014.
  • 7. Triet NM, Viet NN, and Thang P M., Aerodynamic Analysis of Aircraft Wing, VNU Journal of Science: Mathematics – Physics, 31, 2, 2015.
  • 8. Kavya G and Reddy BCR., Design and Finite Element Analysis of Aircraft Wing Using Ribs and Spars, International Journal & Magazine of Engineering Technology, Management and Research, 2, 11, 2015.
  • 9. Kumar BSA, Ramalingaiah, Manjunath S, and Ganganna R., Computational Investigation of Flow Separation over Naca 23024 Airfoil at 6 Million Free Stream Reynolds Number, International Journal of Science, Technology and Society, 3, 6, 2015.
  • 10. Göv İ and Korkmaz Ü., Comparison of Aerodynamic Performance of NACA 4412 and S809 Airfoil, International Mechanical Engineering and Technologies Conference, 183-188, 2016.
  • 11. Göv, I., Dogru, M. H., & Korkmaz, U. 2019. Improvement of the aerodynamic performance of NACA 4412 using the adjustable airfoil profile during the flight. Journal of The Faculty of Engineering and Architecture of Gazi University, 34(2), 1110-1125.
  • 12. Korkmaz Ü. Design of Adjustable Airfoil to Delay Stall [M.S. thesis], The Institute for Graduate Studies in Natural and Applied Sciences, Gaziantep University 2018.
  • 13. Korkmaz Ü, Göv İ, Doğru MH. 2020. Aerodynamic Analyses of Naca 63-215. The International Journal of Energy and Engineering Sciences, 5 (2), 156-166 14. Göv İ, Doğru MH. 2020. Aerodynamic Optimization of Naca 0012 Airfoil. The International Journal of Energy and Engineering Sciences, 5 (2), 146-155 15. Thibert JJ, Reneaux J, Moens F, and Priest J., ONERA activities on high lift devices for transport aircraft, Aeronautical Journal, 99, 395–411, 1995.
  • 16. Spalart, P. R. and Allmaras, S.R., A One-Equation Turbulence Model for Aerodynamic Flows. Recherche Aerospatiale, 1, 5-21, 1994.
  • 17. http://airfoiltools.com/polar/details?polar=xf-n63215-il-50000-n5, 2020.
There are 15 citations in total.

Details

Primary Language English
Journal Section Research Article
Authors

İbrahim Göv 0000-0002-5513-0158

Mehmet Hanifi Doğru 0000-0001-6038-8308

Ümit Korkmaz 0000-0001-6839-1587

Publication Date October 31, 2021
Acceptance Date November 17, 2021
Published in Issue Year 2021 Volume: 6 Issue: 2

Cite

APA Göv, İ., Doğru, M. H., & Korkmaz, Ü. (2021). IMPROVEMENT OF AERODYNAMIC PERFORMANCE OF AN AIRCRAFT USING MORPHING WING. The International Journal of Energy and Engineering Sciences, 6(2), 23-37.

IMPORTANT NOTES

No part of the material protected by this copyright may be reproduced or utilized in any form or by any means, without the prior written permission of the copyright owners, unless the use is a fair dealing for the purpose of private study, research or review. The authors reserve the right that their material can be used for purely educational and research purposes. All the authors are responsible for the originality and plagiarism, multiple publication, disclosure and conflicts of interest and fundamental errors in the published works.

*Please note that  All the authors are responsible for the originality and plagiarism, multiple publication, disclosure and conflicts of interest and fundamental errors in the published works. Author(s) submitting a manuscript for publication in IJEES also accept that the manuscript may go through screening for plagiarism check using IThenticate software. For experimental works involving animals, approvals from relevant ethics committee should have been obtained beforehand assuring that the experiment was conducted according to relevant national or international guidelines on care and use of laboratory animals.  Authors may be requested to provide evidence to this end.
 
**Authors are highly recommended to obey the IJEES policies regarding copyrights/Licensing and ethics before submitting their manuscripts.


Copyright © 2023. AA. All rights reserved