Positioning buildings on a zoning island to provide maximum shading: a case study

Year 2019, Volume: 4 Issue: 3, 129 - 140, 01.10.2019

Hüseyin İnce Nuri Erdem

https://doi.org/10.26833/ijeg.525020

Cited By: 3

Abstract

Because summer days are long, and the weather is too hot, people desire shady spaces to escape the overwhelming effect of the sun. To keep buildings and open-air environments in the shade, a suitable building location design may be created at the planning stage. Positioning of buildings and recreation areas in the maximum amount of shade is closely dependent on the location of the buildings to be built, the distance between the buildings, the time of the day and the sun angles at a particular hour. It was found necessary to carry out this study, since no study was found to be carried out regarding the positioning of buildings in the maximum amount of shade. For buildings to be built in residential areas, separate or block arrangements are applied. This study discusses a building to be built on a reconstruction island in Adana in the Eastern Mediterranean Region of Turkey. First of all, the shading effects of the buildings adjacent to the building in a parcel were examined in detail based on various positions of the façades of the building and different values of the solar azimuth. As a result of the study, the positioning of the buildings for providing the maximum shading was investigated. If the front and rear façades of the buildings were located in the west-east direction, according to the positioning of the buildings in the north-south direction, the front and rear façades would be exposed to less sunlight and more shade. In h = ± 6 sun hours, the façades of buildings in the parcels facing the north were under the influence of the sun rays coming from the side, and the rear façades of the buildings were in the shade.

Keywords

Sun Angles, Shading, Building Shading Positions, Energy Efficiency

References

• Abood, A. A. (2015), “A Comprehensive solar angles simulation and calculation using Matlab”, International Journal of Energy and Environment (IJEE), Volume 6, Issue 4, pp. 367-376.
• Al-Sareef, F. M., Oldham, D. J., Carter, D. J. (2001), “A computer model for predicting the daylight performance of complex paralel shading systems,” Building and Environment, n: 36; 605-18.
• Anderson, J.M. and Mikhail, E.M. (1998), “Surveying theory and practice”, 7th ed. Boston, MA: Mc Graw Hill.
• Arumı-Noe, F. (1996), “Algorithm for geometric contruction of an optimum shading”, Automation in Construction, n: 5; 211-7.
• Atabek, E. (1996), “Computer aided shadowing effect analysis of buildings”, Yüksek Lisans Tezi, Mimarlık Bölümü, ODTÜ, Ankara.
• Bannister, A., Raymond, S. and Baker, R. (1998), “Surveying”. 7th ed. Harlow, UK: Addison Wesley Longman Limited Edinburg Gate, 81–82.
• Capeluto, G.I., Yezioro, A., Shaviv, E. (2003), “Climatic Aspects in Urban Design: A Case Study”, Building and Environment, Vol.38, Issue 6, pp.827-83.
• Data G. (2001), “Effect of fixed horizontal louver shading devices on thermal performance of building by TRNSYS simulation”, Renewable Energy, n: 23; 497-507.
• Erdem, N., and İnce, H. (2016), “The Proposal Of The Building Application For More Benefiting From Solar Light”, International Journal of Engineering and Geosciences, 1 (1), 7-14. DOI: 10.26833/ijeg.285215
• Ekercin, S, Orhan, O, Dadaser-Celik, F. (2019), “Investigating Land Surface Temperature Changes Using Landsat-5 Data And Real-Time Infrared Thermometer Measurements at Konya Closed Basin in Turkey”, International Journal of Engineering and Geosciences, 4 (1), 16-27. DOI: 10.26833/ijeg.417151
• Farr, D. (2008), “Sustainable Urbanism: Urban Design with Nature”, Wiley, New Jersey. Kuşak, L, Küçükali, U. (2019), “Outlier Detection of Land Surface Temperature: Küçükçekmece Region”, International Journal of Engineering and Geosciences, 4 (1), 1-7. DOI: 10.26833/ijeg.404426
• İnce, H., and Erdem, N. (2018), “Gün Işığından Azami Yararlanacak Şekilde Yapılacak Binalar İçin Alan Tasarrufu Bakımından Parsel Konumunun Araştırılması”, Mühendislik Alanında Akademik Araştırmalar, ISBN.978-605-288-390-7, www.gecekitapligi.com, s.143-161, Ankara.
• Mcmullan, R. (1990), “Environmental Science in Building”, Macmillan, Hong Kong. Ok, V. (1992), “A procedure for calculation cooling load due to solar radiation: the shading effects from adjacent or nearby buildings”, Energy and Buildings, Vol.19, 11 – 20.
• Oktay, D. (2004), “Urban Design for Sustainability: A Study on the Turkish City”, International Journal of Sustainable Development and World Ecology, 11/1, March, 24-35.
• Olgyay, V. (1957), “Solar Control and Shading Devices”, Princeton University Press, Princeton. Selim, S, Demir, N. (2019), “Detection of Ecological Networks and Connectivity With Analyzing Their Effects on Sustainable Urban Development”, International Journal of Engineering and Geosciences, 4 (2), 63-70. DOI: 10.26833/ijeg.443114 Soler, A.,
• Oteiza, P. (1997), “Light self-performance in Madrid, Spain”, Building and Environment, (32:2) 87-93.
• Som, T. and Pathak, R. (2015), “Maximum Solar Power Generation through Optimization of Tilt Solar Angles of Solar Panels by Heuristic Technique”, International Journal of Innovative Research in Electrıcal, Electronics, Instrumentation and Control Engineering, DOI 10.17148/IJIREEICE.2015.3409, Vol. 3, Issue 4, April.
• Szokolay, S.V. (1980), “World Solar Architecture”, John Wiley and Sons Inc, New York.
• Tavares, P.F.A.F. and Martins, A.M.O.G. (2007), “Energy Efficient Building Design Using Sensitivity Analysis: A Case Study”, Energy and Buildings, Vol.39, pp.23-31.
• Van Moeseke, G., Bruyère I., De Herde, A. (2007), “Impact of control rules on the efficiency of shading devices and free cooling for office buildings”, Building and Environment (42:2) 784-93.
• Yeang, K. (1995), “Design with Nature: The Ecological Basis for Architectural Design”, McGraw-Hill, New York. Yüceer, N. S. (2010), “Gölge Elemanı Tasarımına Bir Yaklaşım Ve Adana Örneği”, METU JFA 201/2, 27:2 1- 3, DOI:10.4305/METU.JFA.2010.2.1, s.1-12,
• Yüceer, N. S. (2011), “Gölgelenme Elemanlarının Önemi ve Adana Üzerine Bir Deneme”, Ekoloji Mimarlık, Güney Mimarlık, TMMOB Mimarlar Odası Adana Şubesi Yayını, sayı 6, s. 54-56, Adana