Research Article

Prediction of optimum tilt angle of Flat-plate solar collector in Abia State Nigeria

Volume: 4 Number: 3 October 1, 2022
EN

Prediction of optimum tilt angle of Flat-plate solar collector in Abia State Nigeria

Abstract

Most solar collectors in Nigeria are mounted without consideration of optimum tilt angle for maximum solar radiation. To address the gap, a flat plate surface solar collector of area 0.15 m2, hinged on horizontal support for quick adjustment of inclination between 0 to 90o was fabricated marked out at 1o intervals on a telescopic leg graduated in degrees. Measurement of the solar radiation at varying degrees of inclination was taken between 12:00 noon and 2.00 pm for 4 days at clear sky hours, within the week of nth day of the year. The measurements were taken for each month of the year at Michael Okpara University of Agriculture, Umudike. Umuahia, Abia State, Nigeria, at each degree of inclination. The result showed that the optimum angle of inclination of a flat plate for maximum collection of solar radiation intensities for January to December were 9.5, 9.1, 3.0, 6.4, 9.9, 11.8, 9.0, 7.3, 3.1, 7.0, 10.2, and 11.8o respectively. The study also revealed that the average angle of inclination at which a flat surface solar collector can be mounted at a fixed position in Umudike is 8.14o. The analysis indicated that solar energy gain of 123,314.79 MJm-2, 39,041.24 MJm-2, and 25,610.84 MJm-2 for horizontal, Latitude angle of location and calculated fixed angle of inclination of the solar collector respectively. Comparison of the measured and calculated optimum values of angle of inclination of a flat plate surface for trapping maximum solar radiation intensity indicated a high correlation ( R2 ) of 0.97.

Keywords

References

  1. Akanno, E. C. and Ibe, S. N. (2005). Estimates of Genetic Parameters for Growth Traits of Domestic Rabbits in the Humid Tropics. Livestock Research for Rural Development. 17 (7) 86-95.
  2. Agro-climatic Data (2007). Daily climatic data.Agro-Metrological Department. National Root Crop Research Institute (NRCRI), Umudike, Umuahia, Abia State, Nigeria.
  3. Arinze, E. A. (1981). Simulation and experimental evaluation of a solar assisted energy conserving greenhouse.Unpublished Ph. D. Thesis.Department of Agricultural Engineering, University of Saskatchewan, Saskatoon.
  4. Artlet, L. E., J. A.Martines-Lozano, M. P.Utrillas, T.Tena, and R.Pedros (1999). The optimization of the angle of inclination of a solar collector to maximize the incident solar radiation. Renewable Energy, 17 (3): 291-309.
  5. Bena, B. and Fuller, R. J. (2002). Natural convection solar dryer with biomass back up heater. Journal of Solar Energy, 72 (1): 75-83. DOI: https://doi.org/10.1016/S0038-092X(01)00095-0
  6. Chau, K. V. (1982. Optimum tilt angles for solar collectors in clear sky conditions. Journal of Agricultural Engineering Research, 27(4): 321-328. DOI: https://doi.org/10.1016/0021-8634(82)90071-3
  7. Chiemeka, I. U. (2008). Estimation of Solar radiation at Uturu, Nigeria. International Journal of Physics and Sciences. 3(5): 126-130.
  8. Chow, T. T. and Chan, A. L. S. (2004).Numerical study of desirable solar collector orientations for the coastal region of South China. Applied Energy. 79:249-260.

Details

Primary Language

English

Subjects

Engineering

Journal Section

Research Article

Publication Date

October 1, 2022

Submission Date

September 25, 2021

Acceptance Date

July 15, 2022

Published in Issue

Year 2022 Volume: 4 Number: 3

APA
Eke, A., & Etim, P. (2022). Prediction of optimum tilt angle of Flat-plate solar collector in Abia State Nigeria. International Journal of Engineering and Innovative Research, 4(3), 143-153. https://doi.org/10.47933/ijeir.1000262
AMA
1.Eke A, Etim P. Prediction of optimum tilt angle of Flat-plate solar collector in Abia State Nigeria. IJEIR. 2022;4(3):143-153. doi:10.47933/ijeir.1000262
Chicago
Eke, Akachukwu, and Promise Etim. 2022. “Prediction of Optimum Tilt Angle of Flat-Plate Solar Collector in Abia State Nigeria”. International Journal of Engineering and Innovative Research 4 (3): 143-53. https://doi.org/10.47933/ijeir.1000262.
EndNote
Eke A, Etim P (October 1, 2022) Prediction of optimum tilt angle of Flat-plate solar collector in Abia State Nigeria. International Journal of Engineering and Innovative Research 4 3 143–153.
IEEE
[1]A. Eke and P. Etim, “Prediction of optimum tilt angle of Flat-plate solar collector in Abia State Nigeria”, IJEIR, vol. 4, no. 3, pp. 143–153, Oct. 2022, doi: 10.47933/ijeir.1000262.
ISNAD
Eke, Akachukwu - Etim, Promise. “Prediction of Optimum Tilt Angle of Flat-Plate Solar Collector in Abia State Nigeria”. International Journal of Engineering and Innovative Research 4/3 (October 1, 2022): 143-153. https://doi.org/10.47933/ijeir.1000262.
JAMA
1.Eke A, Etim P. Prediction of optimum tilt angle of Flat-plate solar collector in Abia State Nigeria. IJEIR. 2022;4:143–153.
MLA
Eke, Akachukwu, and Promise Etim. “Prediction of Optimum Tilt Angle of Flat-Plate Solar Collector in Abia State Nigeria”. International Journal of Engineering and Innovative Research, vol. 4, no. 3, Oct. 2022, pp. 143-5, doi:10.47933/ijeir.1000262.
Vancouver
1.Akachukwu Eke, Promise Etim. Prediction of optimum tilt angle of Flat-plate solar collector in Abia State Nigeria. IJEIR. 2022 Oct. 1;4(3):143-5. doi:10.47933/ijeir.1000262

Cited By

88x31.png

This work is licensed under a Creative Commons Attribution 4.0 International License