BibTex RIS Cite

MACHINABILTY OF SLEIPNER COLD WORK STEEL WITH WIRE ELECTRO DISCHARGE MACHINING

Year 2012, Volume: 2 Issue: 3, 252 - 260, 01.12.2012

Abstract

Machining techniques in the industry generally, modern processing techniques, that come between wire discharging machine, especially mold, defense, aircraft and aerospace industry, is often used. Processing, which is difficult with conventional manufacturing methods, the complex surface forms, the different material types, hard and is capable of handling high dimensional accuracy and surface roughness [1]. This manufacturing technique were carried on Uddeholm Sleipner cold-work tool steel, variable parameters with On time duration, feed rate, and the current value, as fixed parameters off time duration, voltage, pressure of fluid circulation, velocity of wire, wire tension and wire diameter. Surface roughness of the surface was shown changes as a result of the experimental parameters, diameter and circularity deviation values were studied

References

  • of surface characteristics of AISI D2 tool steel material using Electric Discharge Machining process with Single wall carbon nano tubes IACSIT International Journal of Engineering and Technology Vol. 2, No.1, 2010. http://www.cntaiqun.com/wproducts_conten t-23285.html (Date of access : February 2012) characteristics of copper and aluminum electrodes during edm of stainless steel and carbide, Proceedings of the International
  • Conference on Mechanical Engineering (ICME05-AM-09) Dhaka, Bangladesh, 2005.
  • AISI D2 tool steel machined by the EDM process, Appl. Surface Sci., 242 (2004), pp. –250, 2005. kesme ölçüsüne etkilerinin deneysel incelenmesi,
  • Makine Teknolojileri Elektronik Dergisi Cilt: , No: 13, (31-44), 2010.
  • Bayraktar, A Mathematical model to choose effective cutting parameters in electroerosion, EDM journal of Achievements in Materials and Manufacturing Engineering volume 47 issue 1, 2011.
  • Tomadi, M. A. Hassan and R. Daud, Effects of polarity parameter on machining of tool steel workpiece using lectrical discharge machining, National Engineering Research and postgraduate Students, UMP,Kuantan, Pahang, Malaysia; pp. 621- , 2010.
  • Tebni , S. Ben Salem, Influence of machining parameters on the surface integrity in electrical discharge machining, Archives of Materials Science and Engineering Volume 37 Issue Pages 110-116, 2009.
  • Fundamentals” Sugar Grove, IL , USA 10.http://www.mechanicaldesignforum.co m/content.php?16-Electro-discharge-wire- cutting-(EDWC) (Date of access : February ) H. Rao and M. Srinivasa Rao, Development of hybrid model and optimization of metal removal rate in electric discharge machining using artificial neural networks and genetic algorithm, ARPN Journal of Engineering and Applied Sciences, vol. 3, no. 1, 20-30, 2008. 12.http://www.ascelik.com.tr/urunler.php?i d1=72 (Date of access : February 2012) 13.http://www.assab.com.tr/turkish/1147_
  • TRK_HTML.htm (Date of access : February ) aşındırıcı su jeti ile kesilmesinde yüzey özellikleri, sertlik ve mikro yapı değişimlerinin farklı kesme yöntemleriyle karşılaştırmalı olarak incelenmesi, PhD thesis. Gazi University, Institute of Science, Ankara, 2002.
Year 2012, Volume: 2 Issue: 3, 252 - 260, 01.12.2012

Abstract

References

  • of surface characteristics of AISI D2 tool steel material using Electric Discharge Machining process with Single wall carbon nano tubes IACSIT International Journal of Engineering and Technology Vol. 2, No.1, 2010. http://www.cntaiqun.com/wproducts_conten t-23285.html (Date of access : February 2012) characteristics of copper and aluminum electrodes during edm of stainless steel and carbide, Proceedings of the International
  • Conference on Mechanical Engineering (ICME05-AM-09) Dhaka, Bangladesh, 2005.
  • AISI D2 tool steel machined by the EDM process, Appl. Surface Sci., 242 (2004), pp. –250, 2005. kesme ölçüsüne etkilerinin deneysel incelenmesi,
  • Makine Teknolojileri Elektronik Dergisi Cilt: , No: 13, (31-44), 2010.
  • Bayraktar, A Mathematical model to choose effective cutting parameters in electroerosion, EDM journal of Achievements in Materials and Manufacturing Engineering volume 47 issue 1, 2011.
  • Tomadi, M. A. Hassan and R. Daud, Effects of polarity parameter on machining of tool steel workpiece using lectrical discharge machining, National Engineering Research and postgraduate Students, UMP,Kuantan, Pahang, Malaysia; pp. 621- , 2010.
  • Tebni , S. Ben Salem, Influence of machining parameters on the surface integrity in electrical discharge machining, Archives of Materials Science and Engineering Volume 37 Issue Pages 110-116, 2009.
  • Fundamentals” Sugar Grove, IL , USA 10.http://www.mechanicaldesignforum.co m/content.php?16-Electro-discharge-wire- cutting-(EDWC) (Date of access : February ) H. Rao and M. Srinivasa Rao, Development of hybrid model and optimization of metal removal rate in electric discharge machining using artificial neural networks and genetic algorithm, ARPN Journal of Engineering and Applied Sciences, vol. 3, no. 1, 20-30, 2008. 12.http://www.ascelik.com.tr/urunler.php?i d1=72 (Date of access : February 2012) 13.http://www.assab.com.tr/turkish/1147_
  • TRK_HTML.htm (Date of access : February ) aşındırıcı su jeti ile kesilmesinde yüzey özellikleri, sertlik ve mikro yapı değişimlerinin farklı kesme yöntemleriyle karşılaştırmalı olarak incelenmesi, PhD thesis. Gazi University, Institute of Science, Ankara, 2002.
There are 9 citations in total.

Details

Other ID JA22NM45ZC
Journal Section Articles
Authors

İskender Ozkul This is me

Berat Barıs Buldum This is me

Adnan Akkurt This is me

Publication Date December 1, 2012
Published in Issue Year 2012 Volume: 2 Issue: 3

Cite

APA Ozkul, İ., Buldum, B. B., & Akkurt, A. (2012). MACHINABILTY OF SLEIPNER COLD WORK STEEL WITH WIRE ELECTRO DISCHARGE MACHINING. International Journal of Electronics Mechanical and Mechatronics Engineering, 2(3), 252-260.