Aluminum Gearbox of Vehicle Engine Recycling

Abstract

The usage of natural mines and materials is rapidly increasing in parallel to population growth and industrial developments. It is very important for future generations that the materials used are transported to landfills and protected from mineral resources by preventing them from being thrown into the environment. Separation of materials produced from different metals as much as possible, production of new materials, protection of mineral resources, and reduction of environmental pollution is also very important in economic terms. In addition to legal sanctions for the recycling of metals and other resources, voluntary organizations are making efforts in this regard. For the ones with high production and cost value at the beginning of recycled materials, more successful results are obtained. In the aluminium recycling plant, the collection and disassembly of the vehicle engines and vehicle transmissions are used in the domestic and abroad, and the dismantling of the aluminium alloys prepared according to the specifications requested by the customers. It is considered during this project stage that the vehicle engines and vehicle transmissions from domestic and foreign countries will not need to be recycled, and the vehicle engines and vehicle transmissions will be sold directly if they can be used directly in the vehicles after the necessary repairs.

Keywords

• Scrap metal,Aluminium,Engine,Gearbox,Recycling

References

1. [1] Demiroğlu, U, Yüncüler, Ç, 2016, Estimating light-vehicle sales in Turkey, Central Bank Review 10.1016/j.cbrev.2016.08.003
2. [2] URL 01. http://www.oecd.org/economy/outlook/44089863.pdf Retrieved 04 February 2020
3. [3] Peden M, Scurfield R, Sleet D, Mohan D, Hyder AA, Jarawan E, Mathers C, 2004, World report on road traffic injury prevention, World Health Organization, Geneva
4. [4] Gül, E., 2019, Bilgeustam Giriş , https://www.bilgiustam.com/aluminyum-nedir-nerelerde-kullanilir/ Retrieved 04 February 2019
5. [5] URL 02. Alüminyum Raporu Tmmob Metalurji Mühendisleri Odasi, Alüminyum Komisyonu. https://www.metalurji.org.tr/dergi/dergi137/d137_1445.pdf Retrieved 04 February 2020
6. [6] Özer, B., Güven, V., Mustafaoğlu, M. 2002. “Dünyada ve Türkiye’de Alüminyum Pazarı ve Ticareti,” Assan Alüminyum, Seydişehir 2. Alüminyum Sempozyumu, İstanbul.,
7. [7] Hirsch, J. 2004. “Automotive Trends in Aluminium - The European Perspective,” Materials Forum, vol.28, p.288.
8. [8] Güven, Ş.Y. 2011. Toz Metalurjisi ve Metalik Köpükler, SDU Teknik Bilimler Dergisi, cilt. 1, s. 22.

9. [9] Özcömert, M. 2006. Otomotiv Endüstrisinde Alüminyum, Yüksek Lisans Tezi, İstanbul Ticaret Odası.
10. [10] Dündar, M., Güngör. G. 2002. Otomotiv Sektöründe Alüminyum Uygulamaları ve Sürekli Döküm Tekniği ile Üretilmiş Alüminyum Levha Alaşımları,” http://www.assan.com. tr/DC/Image/P3.pdf, Retrieved: November 2019.
11. [11] Yang Y, Xiao Y, Zhou B, Reuter MA, 2005 Aluminium Recycling: Scrap Melting and Process Simulation. Proceedings of John Floyd International Symposium: Sustainable Developments in Metals Processing, Ed. M. Nilmani, AusIMM, 3-6th July 2005, Melbourne, Australia, pp. 150-160.
12. [12] URL 03. https://publications.jrc.ec.europa.eu/repository/bitstream/JRC64207/reqno_jrc64207_ jrc64207.pdf.pdf Retrieved 04 February 2020
13. [13] URL 04. https://www.eria.org/uploads/media/7.RPR_FY2017_16_Chapter_2.pdf Retrieved 04 February 2020
14. [14] URL 05. http://web.mit.edu/urbanupgrading/urbanenvironment/sectors/solid-waste-sources.html Retrieved 04 February 2020
15. [15] URL-06. https://www.environment.gov.au/system/files/resources/8b5088bd-fd7b-493f-bdc1-f1512cbc2bc4/files/aus-hazwaste-data-reporting-standard-2017-revision.pdf Retrieved 04 February 2020
16. [16] URL 07 https://ec.europa.eu/echo/files/evaluation/watsan2005/annex_files/WEDC/es/ES07CD.pdf. Retrieved 04 February 2020
17. [17] Ghodrat, M, Sharafi, P, Samali, B. 2018/01/10Recovery of Platinum Group Metals Out of Automotive Catalytic Converters Scrap: A Review on Australian Trends and Challengespp 149 – 161 doi - 10.1007/978-3-319-72131-6_13
18. [18] URL 08. https://publications.anl.gov/anlpubs/2011/02/69114.pdf Retrieved 04 February 2020
19. [19] URL 09. https://aluminium-guide.ru/wp-content/uploads/2019/08/jrc58527.pdf Retrieved 04 February 2020
20. [20] Kelly S, Apelian D. (2018) Automotive aluminum recycling at end of life: a grave-to-gate analysis. Center for Resource Recovery and Recycling (CR3) Metal Processing Institute Worcester Polytechnic Institute 100 Institute Rd., Worcester, MA 01609 U.S.A
21. [20] URL 10. https://www.thebalancesmb.com/an-introduction-to-metal-recycling-4057469 Retrieved 04 February 2020
22. [21] URL 11. https://www.env.go.jp/en/recycle/smcs/attach/hcswm.pdf Retrieved 04 February 2020
23. [22] Hammadi MQ, Yassen R S, Abid K N, (2017) Recovery of Platinum and Palladium from Scrap Automotive Catalytic Converters. Al-Khwarizmi Engineering Journal,Vol. 13, No. 3, P.P. 131- 141
24. [23] Llorach RG, Padilla I, Largo OR, Hernandez RS, (2015) Characterization of Solid Wastes from Aluminum Tertiary Sector: The Current State of Spanish Industry. Journal of Minerals and Materials Characterization and Engineering 3(2):55-64 · March 2015 DOI: 10.4236/jmmce.2015.32008
25. [24] Capuzzi S, Timelli S (2018) Preparation and melting of scrap in aluminum recycling: A review (2018) Metals - Open Access Metallurgy Journal 8:249 · April 2018
26. [25] Başer TA. (2012) Aluminium Alloys and Usage in the Automobile Industry. Mühendis ve Makina, 53(635), 51-58
27. [26] URL-12. https://www.environment.gov.au/system/files/resources/7381c1de-31d0-429b-912c-91a6dbc83af7/files/national-waste-report-2018.pdf Retrieved 04 February 2020
28. [27] URL-13. https://www.eu-japan.eu/sites/default/files/publications/docs/waste_management_ recycling_japan.pdf Retrieved 04 February 2020
29. [28] URL 14. https://www.legis.iowa.gov/DOCS/ACO/IC/LINC/Chapter.455d.pdf Retrieved 04 February 2020
30. [29] URL 15. İthalat/ihracat izinleri ile ilgili bilgi ve belgeler, 2019, Çevre ve Şehircilik bakanlığı, https://csb.gov.tr/cevre-ve-sehircilik-bakanligi-ithalat-ve-ihracat-basvurularini-elektronik-ortama-tasiyor-bakanlik-faaliyetleri-25286 Retrieved 04 February 2020
31. [30] Car, E., 2006, İlklim üretimine genel bir bakış , https://www.metalurji.org.tr/dergi/dergi160/ d160_4250.pdf Retrieved 04 February 2020
32. [31] Özden, Ö., 2019 https://www.metalurji.org.tr/dergi/dergi160/d160_4250.pdf, Retrieved 04 February 2020