Investigation of propane combustion at different equivalent ratios in a premixed model burner

Year 2023, Volume: 8 Issue: 4, 731 - 746, 22.12.2023

Murat Taştan , Kağan Cenk Mızrak

https://doi.org/10.58559/ijes.1311480

Cited By: 1

Abstract

Combustion is a chemical process that causes a burning substance to emit heat and light as a result of its reaction with oxygen. Propane can combine with oxygen to perform a combustion reaction. Especially in homes and vehicles, propane combustion is frequently used and heat or light energy is released. In this study, premixed propane combustion was investigated. The thermal power (3 kW) and swirl number (1) were kept constant in all experiments. According to the findings, the O2 emission value also increases with the increase in propane equivalent. It was observed that if the propane equivalent was up to 0.8, the carbon dioxide emission remained at the optimum level. These results are actually similar in terms of light and heat emission. In fact, it was observed that the heat and Luminous emission and the flame height increased to the highest level at less propane equivalent levels. In the study, it was seen that changing the equivalent ratio affects the ratios of various gases produced during combustion and the total heat output. These experiments help optimize the combustion properties of propane. It is also important for design and operating decisions regarding the use of propane in industrial processes.

Keywords

Energy efficiency, Equivalence ratio, Combustion, Propane, Premixed model

References

• [1] Moiseeva KM, Krainov AY, Krainov DA. Numerical Investigation on Burning Rate of Propane-air Mixture. III International Scientific and Technical Conference Materials, Technologies and Equipment for the Development of the Arctic and Siberia, Tomsk, Russian, 2019.
• [2] Ion IV, Popescu F, Mahu R, Rusu E. A Numerical Model of Biomass Combustion Physical and Chemical Processes. Energies 2021; 14(7): 1978.
• [3] Reitz RD, Ogawa H, Payri R, Fansler T, Kokjohn S, Moriyoshi, Y, ... & Zhao H. IJER editorial: The future of the internal combustion engine. International Journal of Engine Research 2020; 21: 3-10.
• [4] Titova N, Kuleshov PS, Starik A. Kinetic Mechanism of Propane Ignition And Combustion in Air, Combustion Explosion and Shock Waves 2011; 47: 249-264.
• [5] Sayın C, Çanakçı M, Kılıçaslan İ. Özsezen N. Çift Yakıtlı (Benzin sıvılaştırılmış Petrol Gazı) Bir Benzin Motorunun İdeal Emisyon Ürünlerine Bağlı Olarak Optimal Karışım Oranının İncelenmesi, Dokuz Eylül Üniversitesi Mühendislik Fakültesi Mühendislik Bilimleri Dergisi 2004; 6: 35-45.
• [6] Kayataş N, Baştürk G. Albayrak B. Bir Propan-Hava Yakıcısında Yerel Entropi Üretimi, Journal of Polytechnic 2005; 8: 161-172.
• [7] Şahino N, Didari V. The Investigation of Gaseous Combustion Products Aiming at the Early Detection of Spontaneous Combustion in Zonguldak Coals, Madencilik Dergisi 2002; 41: 37-51.
• [8] Alabaş B. Effect of biogas addition on combustion instability of propane flame at different external acoustic enforcement frequencies, Fuel 2022; 317.
• [9] Mutlu K. Taştan M. Investigation of combustion instability of propane fuel enriched with oxygen under acoustic enforcement. Petroleum Science and Technology 2023; 42 (1): 37-55.
• [10] Peng Q. Yang W. E J. Li S. Li Z. Xu H. Fu G. Effects of propane addition and burner scale on the combustion characteristics and working performance Applied Energy 2021; 285:116484.
• [11] Taştan M. Mutlu K. Çetintaş S. Examination of combustion behaviors and emissions of hydrogen enriched propane/methane fuel under external acoustic application, International Journal of Energy Studies 2023; 8(3): 371-384.
• [12] Qing-he L. Bai-gang S. Yong-li G. Xi W. Han W. Ji-bin H. Fu-shui L. Ling-zhi B. Chao L. The effect of equivalence ratio, temperature and pressure on the combustion characteristics of hydrogen-air pre-mixture with turbulent jet induced by pre-chamber sparkplug International Journal of Hydrogen Energy 2019; 44(36): 20470-20481.