MEASUREMENT AND EVALUATION OF POWER QUALITY PARAMETERS BATMAN PROVINCE APPLICATION

Year 2021, Volume: 6 Issue: 1-2, 37 - 45, 31.12.2021

Naci Obut , Mehmet Rıda Tür

Abstract

Energy quality is an important issue that concerns energy producers and consumers. In this regard, having power parameters at certain standards ensures that the energy quality is at a high level, and thus a high quality electrical energy is transmitted to the producer. Measuring power quality parameters is a major factor in preventing problems in electrical power plants and devices connected to electrical power plants. It is important to identify the problems, to reach the solution in a shorter way and to prevent the malfunctions that may occur in the systems. For the determination of technical quality in power plants; Measurement principles, technical quality parameters and limit values, technical quality measurements, evaluation of measurement results and the processes to be done ensure the preservation and continuity of technical quality. Power quality parameters (voltage effective value, voltage unbalance, voltage sag, voltage flicker, voltage harmonics) values must comply with TS EN 50160:2011 standards. As a result of the power parameters measurements made in the transformer center in Batman province, it was seen that some of the measurement values were not in the range of standard values. The power quality has been increased by performing the necessary maintenance and repair works related to these parameters.

Keywords

Power quality, Harmonics, Voltage flicker., Power quality, Harmonics, Voltage flicker

References

• REID, E. W., ' Power Quality Issues-Standards and Guidlines', IEEE Trans on IA, Vol 32 No 1, May/June 1996.
• Eklas H., Mehmet Rida T., Sanjeevikumar P., Selim A., Imtiaj K., Analysis and Mitigation of Power Quality Issues in Distributed Generation Systems Using Custom Power Devices, IEEE Access, Volume: 6, 2018
• Roger C. Dugan, Mark F. McGranaghan, H. Wayne Beaty, (1996), Electrical Power System Quality, Mc Graw-Hill
• Guides and Standards for Surge Protection, IEEE Standard C62.,
• Elektrik Şebeke Yönetmeliği, 6. Versiyon, Değişiklik tarihi: 26/11/2017. 28/5/2014 Tarihli ve 29013 sayılı mükerrer Resmi Gazete.
• Arrilaga, J. N. Watson, R. Chen, S. Power System Quality Assessment, WILEY C. Sankaran, (2002), Power Quality, CRC Pres (2001)
• Tur, M.R. and Bayindir, R., A Review of Active Power and Frequency Control in Smart Grid, 2019 1st Global Power, Energy and Communication Conference (IEEE GPECOM2019), June 12-15, 2019, Cappadocia, Turkey
• C. Kocatepe, N. Umurkan, F. Atar, R. Yumurtacı, M. Uzunoğlu, A. Karakaş, O. Arıkan, M. Baysal, Enerji Kalitesi ve Harmonikler, EMO Yayın No. EG/2006/1, (Ocak 2006),
• M.R. Tur, S. Ay, A. Shobole, M. Wadi, Güç Sistemlerinde ünite tahsisi için döner rezerv gereksinimi optimal değerinin kayıp parametrelerin dikkate alınarak hesaplanması, Journal of the Faculty of Engineering & Architecture of Gazi University . 2018, Vol. 2018 Issue 18, Part 2, p1-20. 20p.
• Muğdeşem Tanrıöven- Yrd.Doç.Dr. (Yıldız Teknik Üniversitesi), Rıza İnce- Elektrik Tesisleri Anabilimdalı Yıldız Teknik Üniversitesi Fen Bilimleri Enstitüsü, İSTANBUL
• C. Kocatepe, M. Uzunoğlu, R. Yumurtacı, A. Karakaş, O. Arıkan, Elektrik Tesislerinde Harmonikler, Birsen Yayınevi, (Kasım 2003)
• M.R. Tür, Solution Methods and Recommendations for Power Quality Analysis in Power Systems, Journal of Engineering and Technology 2;2 (2018) 1-9
• Ferracci, P., Teknik Kılavuz No. 199, Güç Kalitesi, Schneider Electric
• HB Teknik Proje ve Dan.Ltd.Şti., Elektrik Güç Sisteminin Kalitesini Bozan Faktörlerin İncelenmesi .www.etmd.org.tr-Teknik Yazılar.
• Tur, M.R., Wadi, M., Shobole, A. and Ay S., Load Frequency Control of Two Area Interconnected Power System Using Fuzzy Logic Control and PID Controller, IEEE ICRERA 14-17 Oct. 2018, France
• Collombet, C. Lupin, J.M. Schonek, J. Teknik Kılavuz No. 152, Şebekelerde Harmonik Bozulmalar ve İyileştirilmesi, Schneider Electric
• IEEE Recomended Practices and Requirements for Harmonic Control in Electrical Power Systems, ANSI/IEEE Standard 519, 1992.
• Massey, G. W., Estimation Methods for Power System Harmonic on Power Distribution Transformer, IEEE Trans on IA, Vol 30 No 2, Marc/April 1994.
• CENELEC, EN50160 EN50160 Voltage characteristics of electricity supplied by public distribution networks, 2007.
• Apay F. T., Güç Kalitesi Parametrelerinin Ölçülmesi Ve Değerlendirilmesi, F.B.E. Elektrik Mühendisliği Anabilim Dalı Elektrik Tesisleri, İSTANBUL, 2008
• G. Ye, Power quality in distribution networks: estimation and measurement of harmonic distortion and voltage dips, Ph.D. dissertation, Dept. Elect. Eng., Tech. Univ. Eindhoven, Eindhoven,
• Tür, R, Yenilenebilir Enerji Kaynaklarına Dayalı Bir Sistemde Güç Kalitesinin İncelenmesi, Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarim Ve Teknoloji 8(3), 572-587, 2020
• E. F. Fuchs, M. A. S. Masoum, Power Quality in Power Systems and Electrical Machines, Elsevier Academic Press, 2008.
• M. R Tür, F. Yaprdakdal, Yenilenebilir Enerji Kaynaklarına Dayalı Bir Sistemde Güç Kalitesi Analizi, Kontrolü ve İzlemesi, Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, Cilt 8, Sayı 3, 572-587, 2020