Prominence of Hadfield Steel in Mining and Minerals Industries: A Review

Year 2017, Volume: 3 Issue: 2, 83 - 90, 28.06.2017

Chijioke Okechukwu Olurotimi Akintunde Dahunsi Peter Kayode Oke İsiaka Oluwole Oladele Mohammed Dauda

https://doi.org/10.19072/ijet.299068

Cited By: 6

Abstract

High manganese
austenitic steel, popularly called “Hadfield steel” has dominated and played
significant role in wear applications, especially in the mines and minerals
industries since its invention over a century ago. A review on the researches
on this steel revealed that its prominence in these fields is mainly due to its
good combination of impact and abrasion wear resistance arising from its high
toughness and high hardness respectively. Its strain hardening ability under
impact loading is evidenced by increase in hardness as the material work
hardens; this lowers the amount of wear in service. The work hardening property
of the steel has been linked to governing mechanisms such as dislocation,
deformation twinning, and dynamic strain ageing; also, it is enhanced by
increase in carbon, ageing temperature and reduction in manganese content.
Carbide precipitation along the grain boundaries and within the grains is the
major cause of embrittlement of the steel. These carbides together with voids
and porosities during casting solidification, improper heat treatment,
overheating during welding, use of unsorted scrap metal and wrong wear
application have been identified as the causes of premature failure in service.
Hardfacing method has been proposed as a means of substituting the steel in
wear applications, as alternative wear materials such as white cast iron and
austempered ductile iron lack the combination of impact and abrasion resistance
being offered by the Hadfield steel. 

Keywords

Hadfield steel, wear, dominance, mining, minerals

References

• Balogun S. A., Esezobor D. E. and Agunsoye J. O., Effect of melting temperature on wear characteristics of austenitic manganese steel, Journal of Minerals & Materials Characteristics & Engineering, Vol. 7, pp. 277 – 289, 2008.
• Allahkaram S. R., Causes of catastrophic failure of high Mn steel utilized as crusher overlaying shields, IJE Transactions B: Applications, Vol. 21, pp. 55 – 64, 2008.
• Haakonsen F., Optimizing of Strømhard austenitic manganese steel, Doctoral Thesis submitted to the Department of Materials Science and Engineering, Norwegian University of Science and Technology, Trondheim, 2009.
• Bhero S. W., Nyembe B. and Lentsoana K., “Common causes of premature failure of Hadfield steel crushers and hammers used in the mining industry”, International Conference on Mining, Mineral Processing and Metallurgical Engineering, ICMMME, Johannesburg, South Africa, pp. 174 -176, 2013.
• Fadhila R., Jaharah A. G., Omar M. Z., Haron C. H. C., Ghazali M. J., et al., Austenite formation of steel – 3401 subjected to rapid cooling process, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 2, pp. 150 – 153, 2007.
• Hai-lun Y., Jing-pei X, Ai-qin W., Wen-yan W. and Cheng, W., Plastic deformation wear in modified medium manganese steel, China Foundry, Vol. 4, pp. 194 – 197, 2007.
• Efstathiou C. and Sehitoglu H., Strengthening Hadfield steel welds by nitrogen alloying, Materials Science and Engineering A, Vol. 11, pp. 1 – 6, 2009.
• Efstathiou, C. and Sehitoglu, H., Strain hardening and heterogeneous deformation during twinning in Hadfield steel, Acta Materialia, Vol. 58, pp. 1479 – 1488, 2010.
• Hosseini S. and Limooei M. B., Optimization of heat treatment to obtain desired mechanical properties of high carbon Hadfield steels, World Applied Sciences Journal, Vol. 15, pp. 1421 – 1424, 2011.
• Qichuan J., Zhenming H. and Yanping C. Influence of carbides and strain-induced martensite on wear resistance of austenitic medium manganese steels, Chin. J. Met. Sci. Technol., Vol. 5, pp. 268 – 272, 1989.
• Mendez J., Ghoreshy M., Mackay W. B. F., Smith T. J. N., and Smith R. W., Weldability of austenitic manganese steel, Journal of Materials Processing Technology, pp. 596 – 602, 2004.
• Xiaodong D., Guodon, S., Yifei W., Jianfeng W. and Haoyu y., Abrasion behaviour of high manganese steel under low impact energy and corrosive conditions, Advances in Tribology, doi: 10.1155/2009/685648, pp. 1 – 5, 2009.
• Havliček P. and Bušová K., Experience with explosive hardening of railway frogs from Hadfield steel, Metal, Vol. 23, 2012.
• Limooei M. B. and Hosseini S., Optimization of properties and structure with addition of titanium in Hadfield steels, Metal, Vol. 5, pp. 23 – 25, 2012.
• Subhi A. D. and Abdulrazaq O. A., Phase transformations of Hadfield manganese steels. Eng. & Technology, Vol. 25, pp 808 – 814, 2007.
• Safarian J. and Kolbeinsen L., Purity requirements for Mn-alloys for producing high manganese TRIP and TWIP steels, The Thirteenth International Ferroalloys Congress, Almaty, Kazakhstan, pp. 175 – 184, 2013.
• Mahlami C. S. and Pan X., An overview on high manganese steel casting, 71st World Foundry Congress, Palacio Euskalduna, Bilbao. 19 – 21 May, 2014.
• Owen W. S. and Grujicic, M., Strain aging of austenitic Hadfield manganese steel, Acta Materialia, Vol. 47, pp. 111 – 126, 1999.
• Olawale J. O., Ibitoye S. A. and Shittu M. D., Work hardening behaviour and microstructural analysis of failed austenitic manganese steel crusher jaws, Materials Research, Vol. 16, pp. 1274 – 1281, 2013.
• Chojecki A. and Telejko I., Cracks in high-manganese cast steel, Archives of Foundry Engineering, Vol. 9, pp. 17 – 22, 2009.
• Chinella J. F., Processing and characterization of high strength, high ductility Hadfield steel, Unclassified Report submitted to U. S. Army Materials Technology Laboratory, Watertown, Massachusetts, 1990.
• Harzallah R., Mouftiez A., Felder E., Hariri S. and Maujean J. –P., Rolling contact fatigue of Hadfield steel X120Mn12, Wear. Vol. 269, pp. 647 – 654, 2010.
• Qian L., Feng X. and Zhang F. Deformed microstructure and hardness of Hadfield high manganese steel, Materials Transactions, Vol. 52, pp. 1623 – 1628, 2011.
• Rittel D. and Roman I., Tensile fracture of coarse-grained cast austenitic manganese steels. Metallurgical Transactions A., Vol. 19A, pp. 2269 – 2277, 1988.
• Canadinc D., Sehitoglu H., Maier H. J., Niklasch D. and Chumlyakov Y. I., Orientation evolution in Hadfield steel single crystals under combined slip and twinning, International Journals of Solids and Structures, Vol. 44, pp. 34 – 50, 2007.
• Jingpei X., Qichuuan j., Zhenming H., Quanshun L. and Sommer K., Mechanism of work-hardening for austenitic manganese steel under non-severe impact loading conditions, Chin. J. Met. Sci. Technol., Vol. 8, pp 406 – 410, 1992.
• Tsakiris V. and Edmonds D. V., Martensite and deformation twinning in austenitic steels, Materials Science and Engineering A, pp. 430 – 436, 1999.
• Karaman I., Sehitoglu H., Beaudoin A. J., Chumlyakov Y. I., Maier H. J. et al., Modeling the deformation behaviour of Hadfield steel single and polycrystals due to twinning and slip, Acta Materialia, Vol. 48, pp. 2031 – 2047, 2000.
• Norberg L., Fatigue properties of austenitic Mn-steel in explosion depth hardened condition, A Master Thesis submitted to the Department of Materials and Manufacturing Technology, Chalmers University of Technology, Gothenburg, Sweden, 2010.
• Zhang Y., Li Y., Han B., Zhang F. and Qian L., Microstructural characteristics of Hadfield steel solidified under high pressure. High Pressure Research: An International Journal, Vol. 3, pp. 634 – 639, 2011.
• Grajcar A. and Borek W., Thermo-mechanical processing of high-manganese austenitic TWIP-type steels, Archives of Civil and Mechanical Engineering, Vol. VIII, pp. 29 – 38, 2008.
• Subramanyam D. K., Swansieger A. E. and Avery H. S., Austenitic manganese steels, 10th Ed., Vol. 1, ASM Metal Handbook, American Society of Metals, pp. 822 – 840, 1990.
• Hamada A. S., Karjalainen L. P. and Somani M. C., The influence of aluminium on hot deformation behaviour and tensile properties of high-Mn TWIP steels, Materials Science and Engineering A, Vol. 467, pp. 114 – 124, 2007.
• Dobrzański L. A., Grajcar A. and Borek W., Microstructure evolution and phase composition of high-manganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering,Vol. 31, pp. 218 – 225., 2008.
• Scott C., Guelton N., Allain S. and Faral M., The development of a new Fe-Mn-C austenitic steel for automotive applications, Materials Science and Technology Conference, Pittsburgh, PA, pp. 127 – 138, 25 – 28 September 2005.
• Curiel-Reyna E., Rojas-Rodriguez I., Terán J., Del- Real A., Lara-Guevar A., et al., Postcooling treatment impact on mechanical properties of welded Hadfield steel pieces. Journal of Emerging Trends in Engineering and Applied Science, Vol. 5, pp. 105 – 110, 2014.
• Kuljanic, E., Sortino, M., Totis, G. and Prosperi, F., Evaluation of commercial tools for machining special alloy Hadfield steel, Retrieved on May 27, 2017, from www.mech-ing.com/journal/Archive/2012/7/MTM/156_Sortino, pp 96 – 99.
• Kopac, J., Hardening phenomena of Mn-austenite steels in the cutting process, Journal of Materials Processing Technology, Vol. 109, pp. 96 – 104, 2001.
• Kivak, T., Uzun, G. and Ekici, E., An experimental and statistical evaluation of cutting parameters on the machinability of Hadfield steel, Gazi University Journal of Science, Vol. 29, pp. 9 – 17, 2016.
• Armstrong, E., Cosler, A. S., and Katz, E. F., Machining of heated metals, Trans. Of the ASME, Vol. 73, pp. 35 – 43, 1951.
• Cebron, M., Kosel, F, and Kopac, J., Effect of cutting on the surface hardness and residual stresses for 12Mn austenitic steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55, pp. 80 – 89, 2012.
• Dolinsek, S., Work-hardening in the drilling of austenitic stainless steel, Journal of Materials Processing Technology, Vol. 133, pp. 63 – 70, 2003.
• Çakir, O., Machining of Hadfield steel: an overview, 2nd International Conference on Advances in Mechanical Engineering (ICAME2016), Proceeding Book, pp. 227 – 232, Yildiz Technical University, Istanbul, Turkey, 11 – 13 May, 2016.
• Potter, W. S., Method of machining manganese steel, United States Patent No. 1,018,001, 1912.
• Pal, D. K. and Basu, S. K., Hot machining of austenitic manganese steel by shaping, International Journal of Machine Tool Design and Research, Vol. 11, pp. 45 – 61, 1971.
• Çakir, O. and Altan, E., Hot Machining of high manganese steel: a review. 12th International Research/Expert Conference “Trends in the Development of Machinery and Associated Technology” TMT, Istanbul, Turkey, 26 – 30 August, 2008.
• Horng, J. – T., Liu, N. – M., and Chiang, K. – T., Investigating the machinability evaluation of Hadfield steel in hard turning with Al2O3/TiC mixed ceramic tool based on the response surface methodology, Journal of Materials Processing Technology, Vol. 208, pp. 532 – 541, 2008.
• Skoczylas P., Krzyńska A. and Kacorowski M., The comparative studies of ADI versus Hadfield cast steel wear resistance, Archives of Foundry Engineering, Vol. 11, pp. 123 – 126, 2011.