Eklemeli İmalat Yöntemleri ve Kullanılan Malzemeler

Onur Özsolak

EN TR

Eklemeli İmalat Yöntemleri ve Kullanılan Malzemeler

Abstract

Eklemeli imalat (AM) yönteminin uygulanması, zorlukları hakkında bir süreç geçmiş fakat araştırmalar hala devam etmektedir. Eklemeli imalat (AM) yöntemi tasarımdaki esneklik ve çoklu malzemeden oluşan parçaların imal edilebilmesini mümkün kılan bir imalat yöntemidir. Eklemeli imalat teknolojileri başlıca uzay ve havacılık, otomotiv, biyomedikal, savunma sanayi, enerji sektörü gibi önemli endüstri alanları için parça üretiminde kullanılmaktadır. Bu araştırmada eklemeli imalat yöntemleri ve bu yöntemde kullanılan malzemeler incelenmiştir.

Keywords

Eklemeli İmalat,Toz Malzemeler,Al Alaşımları,Ti Alaşımları

References

[1] Navrotsky, V., Graichen, A. & Brodin, H. (2015). Industrialisation of 3D printing (Additive Manufacturing) for gas türbine components repair and manufacturing, VGB PowerTech Autorenexemplar, 12, pp.48-52.
[2] EPMA Raporu. (2018). http://eklemeliimalat.info.tr/.
[3] ASTM-International. (2012). ASTM Standard F2792-12a: Standard Terminology for Additive Manufacturing Technologies.
[4] Herzog, D., Seyda, V., Wycisk, E. & Emmelmann, C. (2016). Additive manufacturing of metals. Acta Materialia, 117, pp.371–392, http://doi.org/10.1016/j.actamat.2016.07.019.
[5] Brandl, E., Palm, F., Michailov, V., Viehweger, B. & Leyens, C. (2011). Mechanical properties of additive manufactured titanium (Ti-6Al-4V) blocks deposited by a solid-state laser and wire. Mater. Des. 32, pp.4665-4675.
[6] DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O. & Zhang, W. (2018). Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science, 92, pp.112–224, https://doi.org/10.1016/j.pmatsci.2017.10.001.
[7] Emmelmann, C., Kranz, J., Herzog, D. & Wycisk, E. (2013). Laser additive manufacturing of metals, in: V. Schmidt, M.R. Belegratis (Eds.), Laser Technology in Biomimetics, Springer, Heidelberg, pp.143-161.
[8] Carroll, B.E., Palmer, T.A., Besse, A.M. (2015). Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing. Acta Mater., 87, pp.309-320.
[9] Murr, L.E., Gaytan, S.M., Ramirez, D.A., Martinez, E., Hernandez, J., Amato, K.N., Shindo, P.W., Medina, F.R. & Wicker, R.B. (2012). Metal fabrication by additive manufacturing using laser and electron beam melting Technologies. J. Mater. Sci. Technol., 28 (1), pp.1-14.
[10] Nandan, R., DebRoy, T. & Bhadeshia, H.K.D.H. (2008). Recent advances in friction-stir welding- process, weldment structure and properties. Prog Mater Sci, 53 (6), pp.980–1023.

[11] Agrawal, B.K. (2007). Introduction to Engineering Materials, Tata McGraw-Hill, New Delhi, p. 79.
[12] Yadollahi, A., Shamsaei, N., Thompson, S.M. & Seely, D.W. (2015). Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel. Mater. Sci. Eng. A, 644, pp.171-183.
[13] Majumdar, J.D., Pinkerton, A., Liu, Z., Manna, I. & Li, L. (2005). Microstructure charac terisation and process optimization of laser assisted rapid fabrication of 316L stainless steel. Appl. Surf. Sci., 247, pp.320-327.
[14] Mahmood, K. & Pinkerton, A.J. (2013). Direct laser deposition with different types of 316L steel particle: a comparative study of final part properties. J. Eng. Manuf., Vol. 227 (4), pp.520-531.
[15] Mazumder, J., Choi, J., Nagarathnam, K., Koch, J. & Hetzner, D. (1997). The direct metal deposition of H13 tool steel for 3-D components. JOM, 49 (5), pp.55-60.
[16] Brice, C., Shenoy, R., Kral, M. & Buchannan, K. (2015). Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing. Mater. Sci. Eng. A, 648, pp.9-14.
[17] Bartkowiak, K., Ullrich, S., Frick, T. & Schmidt, M. (2011). New developments of laser processing aluminium alloys via additive manufacturing technique. Phys. Procedia, 12, pp.393-401.
[18] Tan, X., Kok, Y., Tan, Y.J., Descoins, M., Mangelinck, D., Tor, S.B., Leong, K.F. & Chua, C.K. (2015). Graded microstructure and mechanical properties of additive manufactured Ti-6Al-4V via electron beam melting. Acta Mater., 97, pp.1-16.
[19] Baufeld, B., Brandl, E. & Van Der Biest, O. (2011). Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser-beam deposition and shaped metal deposition. J Mater. Proc Tech., 211, pp.1146-1158.

Details

Primary Language

Turkish

Subjects

-

Journal Section

Research Article

Authors

Onur Özsolak
Türkiye

Publication Date

August 26, 2019

Submission Date

May 27, 2019

Acceptance Date

June 27, 2019

Published in Issue

Year 2019 Volume: 3 Number: 1

IZ

https://izlik.org/JA76HM96RC

APA

Özsolak, O. (2019). Eklemeli İmalat Yöntemleri ve Kullanılan Malzemeler. International Journal of Innovative Engineering Applications, 3(1), 9-14. https://izlik.org/JA76HM96RC

AMA

1.Özsolak O. Eklemeli İmalat Yöntemleri ve Kullanılan Malzemeler. IJIEA. 2019;3(1):9-14. https://izlik.org/JA76HM96RC

Chicago

Özsolak, Onur. 2019. “Eklemeli İmalat Yöntemleri Ve Kullanılan Malzemeler”. International Journal of Innovative Engineering Applications 3 (1): 9-14. https://izlik.org/JA76HM96RC.

EndNote

Özsolak O (August 1, 2019) Eklemeli İmalat Yöntemleri ve Kullanılan Malzemeler. International Journal of Innovative Engineering Applications 3 1 9–14.

IEEE

[1]O. Özsolak, “Eklemeli İmalat Yöntemleri ve Kullanılan Malzemeler”, IJIEA, vol. 3, no. 1, pp. 9–14, Aug. 2019, [Online]. Available: https://izlik.org/JA76HM96RC

ISNAD

Özsolak, Onur. “Eklemeli İmalat Yöntemleri Ve Kullanılan Malzemeler”. International Journal of Innovative Engineering Applications 3/1 (August 1, 2019): 9-14. https://izlik.org/JA76HM96RC.

JAMA

1.Özsolak O. Eklemeli İmalat Yöntemleri ve Kullanılan Malzemeler. IJIEA. 2019;3:9–14.

MLA

Özsolak, Onur. “Eklemeli İmalat Yöntemleri Ve Kullanılan Malzemeler”. International Journal of Innovative Engineering Applications, vol. 3, no. 1, Aug. 2019, pp. 9-14, https://izlik.org/JA76HM96RC.

Vancouver

1.Onur Özsolak. Eklemeli İmalat Yöntemleri ve Kullanılan Malzemeler. IJIEA [Internet]. 2019 Aug. 1;3(1):9-14. Available from: https://izlik.org/JA76HM96RC

This work is licensed under CC BY-NC 4.0

Eklemeli İmalat Yöntemleri ve Kullanılan Malzemeler

Additive Manufacturing of Metals and Methods

Abstract

Keywords

Eklemeli İmalat Yöntemleri ve Kullanılan Malzemeler

Abstract

Keywords

References

Details

Primary Language

Subjects

Journal Section

Authors

Publication Date

Submission Date

Acceptance Date

Published in Issue

IZ

Cite