Research Article
Farklı Köşe Yuvarlatma Geometrilerinin Freze Kesici Takımlarındaki Gerilmelere Etkisinin Sonlu Elemanlar Yöntemiyle İncelenmesi
Abstract
Bu çalışmada; imalat sanayinde kullanımı en fazla olan ekipmanlardan kesici
takımların kullanım ömrünü arttıran köşe yuvarlatma işleminin takım ve iş
parçasına olan etkileri sonlu elemanlar yöntemi ile incelenmiştir.
Keywords
References
- 1. Rodrigez C., Cutting Edge Preparation of Precision Cutting Tools By Applying Micro-abrasive Jet Machining and Brushing, Kassel University, 2009
- 2. K. Khalili ve M. Safaei, FEM analysis of Edge Preparation for Chamfered Tools, 2009
- 3. Fang, N., Slip-line modelling of machining with a rounded edge tool-Part 1: new model and theory. 2003
- 4. Shravankumar C., Bharat.S.Kodli, A Finite Element Analysis of Orthogonal Machining Using Different Tool Edge Geometries and End Relief Angles
- 5. T.TYAN, WE1 H. YANG “ANALYSIS OF ORTHOGONAL METAL CUTTINGPROCESSES”, International Journal For Numerical Methods in Engineering, Vol.34,365-389,1992.
- 6. Altan, T., Yen, Y.Ch, and Anurag,J., “A finite element analysis of orthogonal machining using different tool edge geometries”,(ERC/NSM), The Ohio StateUniversity, USA, 2002.
Farklı Köşe Yuvarlatma Geometrilerinin Freze Kesici Takımlarındaki Gerilmelere Etkisinin Sonlu Elemanlar Yöntemiyle İncelenmesi
Abstract
Keywords
References
- 1. Rodrigez C., Cutting Edge Preparation of Precision Cutting Tools By Applying Micro-abrasive Jet Machining and Brushing, Kassel University, 2009
- 2. K. Khalili ve M. Safaei, FEM analysis of Edge Preparation for Chamfered Tools, 2009
- 3. Fang, N., Slip-line modelling of machining with a rounded edge tool-Part 1: new model and theory. 2003
- 4. Shravankumar C., Bharat.S.Kodli, A Finite Element Analysis of Orthogonal Machining Using Different Tool Edge Geometries and End Relief Angles
- 5. T.TYAN, WE1 H. YANG “ANALYSIS OF ORTHOGONAL METAL CUTTINGPROCESSES”, International Journal For Numerical Methods in Engineering, Vol.34,365-389,1992.
- 6. Altan, T., Yen, Y.Ch, and Anurag,J., “A finite element analysis of orthogonal machining using different tool edge geometries”,(ERC/NSM), The Ohio StateUniversity, USA, 2002.
There are 6 citations in total.
Details
| Primary Language | Turkish |
|---|---|
| Subjects | Engineering |
| Journal Section | Research Article |
| Authors | |
| Submission Date | August 4, 2019 |
| Publication Date | August 26, 2019 |
| IZ | https://izlik.org/JA39BR23AG |
| Published in Issue | Year 2019 Volume: 3 Issue: 1 |
Cite
This work is licensed under CC BY-NC 4.0
