Comparative Study between Direct and Indirect Vector Control Applied to a Wind Turbine Equipped With a Double-Fed Asynchronous Machine Article

Abstract

Abstract- This paper presents the study and the use of induction generator in wind energy production. To do this, a model of the wind turbine was established, and then presents the mathematical model of the double-fed induction generator (DFIG) variable speed and the control variables used when integrated with a wind system. Modeling in a reference related to the two-phase stator field and a strategy for vector control stator in active and reactive powers are provided with a summary of the controller proportional-integral (PI), as well as simulation results.

Keywords

• Keywords-Turbine, Wind, Generator Asynchronous, vector control, control direct power.

References

1. Frédéric poitiers, " Study and control asynchronous generator for use Wind Energy ", doctoral thesis the University of Nantes, supported the 19/15/2003.
2. Nesmat Abu-Tabak, “Dynamic Stability of multimachine electrical Systems”, doctoral thesis, school doctoral France, electronics, automatic, Lyon, 2008.
3. D. Beriber, "Optimization and energy management system of production Wind- PV with storage ", doctoral thesis, USTHB, Algeria, supported the 2010.
4. D. Beriber, " Double-fed asynchronous machine stator fed by three inverters levels in NPC structure", Magister thesis, ENP, Algeria, 2004.
5. S. El Aimani, " Modeling of different technologies integrated in a wind medium voltage grid " , doctoral Thesis, ENSAM Lille, 2004.
6. F. Bouchafaa, D. Beriber, M.S. Boucherit and E.M. Berkouk, "Enslavement and control in dq inverter NPC", Archives of control sciences, vol. 18, N°.4, pp. 497- 513, Décembre 2008.
7. S. KHOJET EL Khil, " Vector Control of Doubly Fed Asynchronous Machine (MADA)", doctoral Thesis of the National Polytechnic Institute of Toulouse, supported the 04/12/2006 5 10 15 -20 Temps (s) ias ibs ics