BULGUR ÜRETİMİNDE PİŞİRME İŞLEMİNE YÖNELİK ÖZGÜN BİR ISIL ANALİZİ: ENDÜSTRİYEL SÜREÇLER İÇİN TASARIM ÖNERİLERİ, ENERJİ VERİMLİLİĞİ VE ATIKSU AZALTIMI

Year 2020, Volume: 40 Issue: 1, 113 - 129, 30.04.2020

İbrahim Yılmaz Mehmet Söylemez

Abstract

Bu çalışmanın ana katkısı, buğday pişirme işlemini özgün bir ısıl modelle izah ederek sunmak ve enerji-verimli bir pişirme kazanı için tasarım yöntemi önermektir. Küçük-ölçekli bir pişirme kazanı tasarlanmış ve modelin çeşitli çalışma şartları altında doğrulanması için bir deney düzeneği kurulmuştur. Geliştirilen model Engineering Equation Solver yazılımı kullanılarak çözülmüştür. Sonuçlar deneylerle kıyaslanmış ve iyi bir uyum elde edilmiştir. Isıl modelin doğrulanması ve büyük-ölçekli pişirme kazanlarına yönelik kullanışlı bir tasarım aracı olması için ayrıca bir hesaplamalı akışkanlar dinamiği modeli geliştirilmiştir. Pişirme işleminin enerji verimliliğinin, pişirme kazanının sarmal ısı değiştiricisi üzerindeki minimum ısı akısının çekirdekli kaynamayı (ısıtma elemanı yüzeyi ve doyma sıcaklığı arasında minimum ~5 °C farkla) karşılayacak şekilde başlatılmasıyla arttırılabileceği bulunmuştur. Enerji talebini azaltarak fakat nihai ürün kalitesini koruyarak, atıksuyun 5-günlük biyolojik oksijen ihtiyacı en az %50 oranında azaltılmıştır. Enerji optimizasyonu ve su geri kazanımı teknikleri yerine getirildiği takdirde buğday-su oranının 1,0−1,2'ye düşürülebileceği önerilmektedir. Tahmini ortalama özgül enerji tüketim hızının 400‒475 ±%5 W/kg (bir kilogram buğday için gerekli olan ısıl güç) arasında yer almakta, bu değer buğday-su oranının 1,0'a düşürülmesiyle ilaveten ~%25 oranında azaltılabilmektedir. Çalışmadan elde edilen sonuçların ısı ve gıda mühendisleri için endüstriyel pişirme kazanlarının tasarım uygulamalarında, daha az zararlı atıksu ile enerji optimizasyonunda ve buğdayın pişirilmesi için süreç kontrol stratejilerinde kılavuzluk edeceği düşünülmektedir

Keywords

bulgur, Buğday pişirme, pişirme modeli, enerji analizi, kazan tasarımı, atıksu

A NOVEL THERMAL ANALYSIS FOR COOKING PROCESS IN BULGUR PRODUCTION: DESIGN CONSIDERATIONS, ENERGY EFFICIENCY AND WASTEWATER DIMINUTION FOR INDUSTRIAL PROCESSES

Abstract

The main contribution of this study is to present a novel thermal model for analyzing the wheat cooking process and to propose a design procedure for an energy-efficient cooking pot. A small-scale cooking pot was designed and an experimental setup was installed to verify the model under various operating conditions. The developed model was solved using the Engineering Equation Solver software. Results were compared with those of the experiments and good agreement was obtained. Additionally, a computational fluid dynamics model was developed to verify the thermal model and have a useful design tool for large-scale cooking pots. It was found that the energy efficiency of the cooking process can be enhanced by initiating nucleate boiling (at ~5 °C minimum temperature difference between the heating element surface and saturation) which will supply the minimum heat flux on the helicoidal heat exchanger of the cooking pot. Lessening the energy demand but preserving the final product quality has decreased the 5-day biological oxygen demand of wastewater at least 50%. It is proposed that the wheat to water ratio can be reduced to 1.0−1.2 once the energy optimization and water recovery practices are satisfied. The estimated average specific energy consumption rate lies between 400‒475 ±5% W/kg (thermal power supplied for one kilogram of wheat) which can be reduced ~25% further by reducing the wheat to water ratio to 1.0. The results reported in the present study are expected to guide thermal and food engineers for the design applications of industrial cooking pots, energy optimization with less harmful wastewater and process control strategies for cooking of wheat.

Keywords

Wheat cooking, bulgur, cooking model, energy analysis, cooker design, wastewater

References

• AOAC, 1990, Official Methods of Analysis of the Association of Official Analytical Chemists, (Fifteenth Ed.), Washigton, DC. Bakshi A. S. and Singh R. P., 1980, Kinetics of water diffusion and starch gelatinization during rice parboiling, J. Food Sci., 45(5), 1387-1392.
• Balcı F. and Bayram M., 2020, Bulgur cooking process: Recovery of energy and wastewater, J. Food Eng., 269, 109734.
• Bayram M., 2005, Modelling of cooking of wheat to produce bulgur, J. Food Eng., 71(2), 179-186.
• Bayram M., 2006, Determination of the cooking degree for bulgur production using amylose/iodine, centre cutting and light scattering methods, Food Control, 17(5), 331-335.
• Bayram M. and Öner M. D., 2006, Determination of applicability and effects of colour sorting system in bulgur production line, J. Food Eng., 74(2), 232-239.
• Bayram M., Öner M. D. and Eren S., 2004, Effect of cooking time and temperature on the dimensions and crease of the wheat kernel during bulgur production, J. Food Eng., 64(1), 43-51.
• Bruce D. and Giner S., 1993, Mathematical modelling of grain drying in counter-flow beds: investigation of crossover of air and grain temperatures, J. Agr. Eng. Res., 55(2), 143-161.
• Chin Y.-S. S., 1995, Numerical solution of the complete two-phase model for laminar film condensation with a noncondensable gas, Ph.D. Thesis, Manitoba University, Canada.
• Churchill S. W. and Chu H. H., 1975, Correlating equations for laminar and turbulent free convection from a vertical plate, Int. J. Heat Mass Tran., 18(11), 1323-1329.
• Cornwell K. and Houston S., 1994, Nucleate pool boiling on horizontal tubes: a convection-based correlation, Int. J. Heat Mass Tran., 37, 303-309.
• Çengel Y. A. and Ghajar A. J., 2011, Heat and mass transfer: Fundamentals & Applications (Fourth Ed.), McGraw-Hill, New York. Fuchs, 2013, Opet Fuchs Mineral Oil Industry and Trade Inc., Izmir, Turkey, Renolin Therm 320 Product Information.
• Fujii T. and Imura H., 1972, Natural-convection heat transfer from a plate with arbitrary inclination, Int. J. Heat Mass Tran., 15(4), 755-767.
• Gerstmann J. and Griffith P., 1967, Laminar film condensation on the underside of horizontal and inclined surfaces, Int. J. Heat Mass Tran., 10(5), 567-580.
• Hogg G. W., 1969, The effect of secondary flow on point heat transfer coefficients for turbulent flow inside curved tubes, Ph.D. Thesis, Idaho University, Moscow.
• Hunterlab, 2019, Colorflex specifications, https://www.hunterlab.com/colorflex-ez-specifications.pdf.
• Izocam, 2019, Technical datasheet of Izocam industrial blanket, http://www.izocam.com.tr/p157-industrial-blanket.html.
• Jayakumar J., Mahajani S., Mandal J., Iyer K. N. and Vijayan P., 2010, CFD analysis of single-phase flows inside helically coiled tubes, Comput. Chem. Eng., 34(4), 430-446.
• Kline S. and McClintock F., 1953, Describing uncertainties in single-sample experiments, ASME Mech. Eng.,75(1), 3-8.
• Koca A. F. and Anıl M., 1996, Farklı buğday çeşitleri ve pişirme yöntemlerinin bulgur kalitesine etkisi, Gıda Dergisi, 21(5).
• Krohne, 2019, Optimass 6000 technical datasheet, https://cdn.krohne.com/fileadmin/media-lounge/files-marine/Downloads_pdf/TD_OPTIMASS_6000.pdf.
• Manlapaz R. L. and Churchill S. W., 1981, Fully developed laminar convection from a helical coil, Chem. Eng. Commun., 9(1-6), 185-200.
• Marrero T. R. and Mason E. A., 1972, Gaseous diffusion coefficients, J. Phy. Chem. Ref. Data, 1(1), 113-118.
• Mccdaq, 2019a, USB-2416 User's Guide, https://www.mccdaq.com/pdfs/manuals/USB-2416.pdf.
• Mccdaq, 2019b, USB-TEMP User's Guide, https://www.mccdaq.com/pdfs/manuals/USB-TEMP.pdf.
• MGM, 2019, Weather forecast for Gaziantep, https://www.mgm.gov.tr/tahmin/il-ve-ilceler.aspx?il=Gaziantep&ilce=%C5%9Eehitkamil.
• Minkowycz W. and Sparrow E., 1966, Condensation heat transfer in the presence of noncondensables, interfacial resistance, superheating, variable properties, and diffusion, Int. J. Heat Mass Tran., 9(10), 1125-1144.
• Münzing K., 1991, DSC studies of starch in cereal and cereal products, Thermochim. Acta, 193, 441-448.
• Mwesigye A., Yılmaz İ. H. and Meyer J. P., 2018, Numerical analysis of the thermal and thermodynamic performance of a parabolic trough solar collector using SWCNTs-Therminol® VP-1 nanofluid, Renew. Energ., 119, 844-862.
• Ordel, 2019, Resistance thermometer, http://www.ordel.com.tr/en/urun/or60.
• Orlov V. and Tselishchev P., 1964, Heat exchange in spiral coils with turbulent flow of water, Therm. Eng. (Translated from Teploenergetika), 11(12), 97.
• Pakkens, 2019, Accurate pressure gauges, http://www.pakkens.com.tr/products/basinc-olcerler-1/hassas-manometre-6/?lang=en.
• Pratt N. H., 1947, The heat transfer in a reaction tank cooled by means of a coil, T. I. Chem. Eng.-Lond., 25, 163-180.
• Rocca-Poliméni R., Flick D. and Vasseur J., 2011, A model of heat and mass transfer inside a pressure cooker, J. Food Eng., 107(3-4), 393-404.
• Rohsenow W. M., Hartnett J. P. and Cho Y. I., 1998, Handbook of Heat Transfer (Third Ed.), McGraw-Hill, New York.
• Srinivasan P., Nandapurkar S. and Holland F., 1970, Friction factors for coils, Trans. Inst. Chem. Eng., 48(4-6), T156-T161.
• Stapley A., Fryer P. and Gladden L., 1998, Diffusion and reaction in whole wheat grains during boiling, AICHE J., 44(8), 1777-1789.
• TMO, 2019, Turkish grain board, http://www.tmo.gov.tr/Upload/Document/hububatsektorraporu2018.pdf.
• Turhan M. and Gunasekaran S., 2002, Kinetics of in situ and in vitro gelatinization of hard and soft wheat starches during cooking in water, J. Food Eng., 52(1), 1-7.
• Watanabe H., Fukuoka M., Tomiya A. and Mihori T., 2001, A new non-Fickian diffusion model for water migration in starchy food during cooking, J. Food Eng., 49(1), 1-6.
• Yildizpompa, 2019, Technical properties of YKF-1" internal eccentric gear pump, http://www.yildizpompa.com/wp-content/uploads/2017/11/YKF-1%C2%BD.pdf.
• Yılmaz İ. H. and Söylemez M. S., 2014, Thermo-mathematical modeling of parabolic trough collector. Energ. Convers. Manage., 88, 768-784.
• Yılmaz İ. H., 2014, A theoretical and experimental study on solar-assisted cooking system to produce bulgur by using parabolic trough solar collector, Ph.D. Thesis, Gaziantep University, Turkey.
• Yılmaz İ. H., 2018, Energy efficient cooking pot (In Turkish: Enerji verimli pişirme kazanı), Patent No: TR 2015 13024 B, Turkish Patent and Trademark Office. Turkey.
• Yılmaz İ. H. and Göksu T. T., 2016, Experimental and CFD analyses of a helicoidal heat exchanger, International Energy Engineering Congress 2016, Gaziantep, Turkey, 638-646.
• Yılmaz İ. H., Göksu T. T., Kılıç M. and Söylemez M. S., 2017, Performance comparison of circular and square cross-sectioned helicoidal heat exchangers using experimental and CFD analyses, International Conference on Advances and Innovations in Engineering, Elazıg, Turkey, 487-490.
• Yılmaz İ. H., Hayta H., Yumrutaş R. and Söylemez M. S., 2018, Performance testing of a parabolic trough collector array for a small-scale process heat application, ISI BILIM TEK DERG (Journal of Thermal Science and Technology), 38(1), 43-53.
• Yılmaz İ. H. and Mwesigye A., 2018, Modeling, simulation and performance analysis of parabolic trough solar collectors: A comprehensive review, Appl. Energ., 225, 135-174.