Please visit :

https://jame.yildiz.edu.tr/instructions-for-authors

Terms of Submission

Papers must be submitted on the understanding that they have not been published elsewhere and are not currently under consideration by another journal or any other publisher. The submitting author is responsible for ensuring that the article's publication has been approved by all the other coauthors. It is also the authors' responsibility to ensure that the articles emanating from a particular institution are submitted with the approval of the necessary institution. Only an acknowledgment from the editorial office officially establishes the date of receipt. Further correspondence and proofs will be sent to the author(s) before publication unless otherwise indicated. It is a condition of submission of a paper that the authors permit editing of the paper for readability. All enquiries concerning the publication of accepted papers should be addressed to jame@yildiz.edu.tr.

Peer Review Process
Journal of Advances in Manufacturing Engineering utilizes a double-blind peer review process where both the identities of reviewers and authors are anonymous. The editor-in-chief is responsible of the editorial and scientific content of the journal and makes the final decision.

Submitted manuscripts that pass preliminary control are evaluated by editor-in-chief for their originality, methodology, the importance of the subject covered and compliance with the journal scope. For the manuscripts that are considered for publication an unbiased, double-blinded peer-review process is initiated by associate editors. The manuscripts are sent to two or more independent peer reviewers who are expert in the field. The reviewers are asked to provide detailed, constructive comments that will help the editor to make a decision, and the authors to improve their manuscript. The requested changes are made by the authors using the online manuscript submission system. Associate editor sends the original manuscript, the revised manuscript and all the reviewers’ comments together with his recommendation to the editor-in-chief.

Editor-in-chief reviews the manuscript and makes the final decision. He might accept the manuscript, reject the manuscript or request further revisions.

In case of manuscripts submitted by editors or by the editorial board members of the journal, the editorial board will invite an external and independent editor to manage the evaluation processes of these manuscripts. The reviewers are required to notify the editor of any kinds of conflicts of interest with respect to the research, the authors and/or the research funders. They must ensure that all the information related to submitted manuscripts is kept as confidential and must report to the Editor-in-Chief if they are aware of copyright infringement and plagiarism on the author’s side.

Journal of Advances in Manufacturing Engineering takes into consideration the Committee on Publication Ethics - COPE guidelines and flow charts for peer review process.

Editorial Board Members' Submission and Review Process

• In cases where a member of the Editorial Board is an author or co-author of a submitted manuscript, strict conflict of interest protocols are followed.
• The involved Editorial Board member will be completely excluded from the review process of their submission.
• An independent review coordinator, not affiliated with the Editorial Board, will be appointed to manage the peer-review process for such submissions.
• The identity of the reviewers will remain confidential, adhering to our double-blind review policy.
• Editorial Board members will not have access to any information or discussion related to the evaluation of their manuscript.
• Decisions on these manuscripts will be made based on the same criteria and rigorous review process applied to all other submissions, ensuring fairness and impartiality.
• Only one article per year can be published by the Editorial Board members.
 
Plagiarism Detection
All submissions are screened using similarity detection software (iThenticate) at least two times: on submission and after completing revisions. In the event of alleged or suspected research misconduct, e.g., plagiarism, citation manipulation, or data falsification/fabrication, the editorial board will follow and act in accordance with COPE guidelines. Plagiarism, including self-plagiarism, that is detected at any stage will result in rejection of the manuscript.

Title and Authorship Information
The following information should be included

Paper title
Full author names
Full institutional mailing addresses

Abstract
The manuscript should contain an abstract. The abstract should be self-contained and citation-free and should not exceed 200 words. An abstract showing the novelty and main findings of the study should be written in the abstract section. The number of keywords should be between 3-5.

Introduction
Journal of Advances Manifacturing Engineering (JEMS) aims to encourage and publish research studies about the challenges and opportunities associated with considerable numbers of understandings in the manifacturing sector. Besides, JAME also aims to reach out to relevant audiences by publishing the latest scientific and technological developments. JEMS journal, is published periodically and regularly. Scope of the journal covers national, international and local studies regarding Manifacturing Engineering, Quality Engineering, Industrial Engineering, Production Engineering, Mechanichal Engineering, Automotive Engineering and Mechatronic Engineering. This section should be succinct, with no subheadings.

Materials and Methods
This part should contain sufficient detail so that all procedures can be repeated. It can be divided into subsections if several methods are described.

Results and Discussion
This section may each be divided by subheadings or may be combined.

Conclusions
This should clearly explain the main conclusions of the work highlighting its importance and relevance.

Articles include Acknowledgments, Data Avability Statement, Author's Contribution, Conflict of Interest, Ethics sections after the conclusion section.

Acknowledgments
All acknowledgments (if any) should be included at the very end of the paper before the references and may include supporting grants, presentations, and so forth.

Data Availability Statement
It is stated that the published publication includes all graphics and data collected or developed during the study.

Author’s Contributions
All authors' contributions to the article are indicated.

Conflict of Interest
Authors must declare that they have no potential conflicts of interest regarding the research, authorship and/or publication of this article.

Ethics
It should be noted that there was no ethical issues in publishing the article.

References
Authors are responsible for ensuring that the information in each reference is complete and accurate. All references must be numbered consecutively and citations of references in text should be identified using numbers in square brackets (e.g., “as discussed by Smith [9]”; “as discussed elsewhere [9, 10]”). All references should be cited within the text; otherwise, these references will be automatically removed. References should be written according to the APA 6. Reference Style Guide. In the table below, you can see examples of references conforming to APA.

References style;

Journal Article

Grady, J. S., Her, M., Moreno, G., Perez, C., & Yelinek, J. (2019). Emotions in storybooks: A comparison of storybooks that represent ethnic and racial groups in the United States. Psychology of Popular Media Culture, 8(3), 207–217. https://doi.org/10.1037/ppm0000185

If a journal article has a DOI, include the DOI in the reference.

Journal article with an article number

Jerrentrup, A., Mueller, T., Glowalla, U., Herder, M., Henrichs, N., Neubauer, A., & Schaefer, J. R. (2018). Teaching medicine with the help of “Dr. House.” PLoS ONE, 13(3), Article e0193972. https://doi.org/10.1371/journal.pone.0193972

If the journal article has an article number instead of a page range, include the word “Article” and then the article number instead of the page range.

Journal article with missing information

Missing volume number

Stegmeir, M. (2016). Climate change: New discipline practices promote college access. The Journal of College Admission, (231), 44–47. https://www.nxtbook.com/ygsreprints/NACAC/nacac_jca_spring2016/#/46

Missing issue number

Sanchiz, M., Chevalier, A., & Amadieu, F. (2017). How do older and young adults start searching for information? Impact of age, domain knowledge and problem complexity on the different steps of information searching. Computers in Human Behavior, 72, 67–78. https://doi.org/10.1016/j.chb.2017.02.038

Missing page or article number

Butler, J. (2017). Where access meets multimodality: The case of ASL music videos. Kairos: A Journal of Rhetoric, Technology, and Pedagogy, 21(1). http://technorhetoric.net/21.1/topoi/butler/index.html

Retracted journal article

Joly, J. F., Stapel, D. A., & Lindenberg, S. M. (2008). Silence and table manners: When environments activate norms. Personality and Social Psychology Bulletin, 34(8), 1047–1056. https://doi.org/10.1177/0146167208318401 (Retraction published 2012, Personality and Social Psychology Bulletin, 38[10], 1378)

Book

Jackson, L. M. (2019). The psychology of prejudice: From attitudes to social action (2nd ed.). American Psychological Association. https://doi.org/10.1037/0000168-000

Sapolsky, R. M. (2017). Behave: The biology of humans at our best and worst. Penguin Books.

Svendsen, S., & Løber, L. (2020). The big picture/Academic writing: The one-hour guide (3rd digital ed.). Hans Reitzel Forlag. https://thebigpicture-academicwriting.digi.hansreitzel.dk/

Edited Book

Hygum, E., & Pedersen, P. M. (Eds.). (2010). Early childhood education: Values and practices in Denmark. Hans Reitzels Forlag. https://earlychildhoodeducation.digi.hansreitzel.dk/

Kesharwani, P. (Ed.). (2020). Nanotechnology based approaches for tuberculosis treatment. Academic Press.

Torino, G. C., Rivera, D. P., Capodilupo, C. M., Nadal, K. L., & Sue, D. W. (Eds.). (2019). Microaggression theory: Influence and implications. John Wiley & Sons. https://doi.org/10.1002/9781119466642

Republished book, with editor

Watson, J. B., & Rayner, R. (2013). Conditioned emotional reactions: The case of Little Albert (D. Webb, Ed.). CreateSpace Independent Publishing Platform. http://a.co/06Se6Na (Original work published 1920)

Book published with new foreword by another author

Kübler-Ross, E. (with Byock, I.). (2014). On death & dying: What the dying have to teach doctors, nurses, clergy & their own families (50th anniversary ed.). Scribner. (Original work published 1969)

Several volumes of a multivolume work

Harris, K. R., Graham, S., & Urdan T. (Eds.). (2012). APA educational psychology handbook (Vols. 1–3). American Psychological Association.

Chapter in an edited book

Aron, L., Botella, M., & Lubart, T. (2019). Culinary arts: Talent and their development. In R. F. Subotnik, P. Olszewski-Kubilius, & F. C. Worrell (Eds.), The psychology of high performance: Developing human potential into domain-specific talent (pp. 345–359). American Psychological Association. https://doi.org/10.1037/0000120-016

Chapter in an edited book, reprinted from another book

Bronfenbrenner, U. (2005). The social ecology of human development: A retrospective conclusion. In U. Bronfenbrenner (Ed.), Making human beings human: Bioecological perspectives on human development (pp. 27–40). SAGE Publications. (Reprinted from Brain and intelligence: The ecology of child development, pp. 113–123, by F. Richardson, Ed., 1973, National Educational Press)

Report with Individual Authors References

This page contains reference examples for reports with individual authors.

Baral, P., Larsen, M., & Archer, M. (2019). Does money grow on trees? Restoration financing in Southeast Asia. Atlantic Council. https://www.atlanticcouncil.org/in-depth-research-reports/report/does-money-grow-on-trees-restoring-financing-in-southeast-asia/

Stuster, J., Adolf, J., Byrne, V., & Greene, M. (2018). Human exploration of Mars: Preliminary lists of crew tasks (Report No. NASA/CR-2018-220043). National Aeronautics and Space Administration. https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190001401.pdf

Report by a Government Agency References

This page contains a reference example for a report by a government agency.

National Cancer Institute. (2019). Taking time: Support for people with cancer (NIH Publication No. 18-2059). U.S. Department of Health and Human Services, National Institutes of Health. https://www.cancer.gov/publications/patient-education/takingtime.pdf

Conference Paper in Print

Jang, S. (2019, August 8–11). Deconstructing the opposition of natural/arbitrary in Coleridge’s theory of language [Paper presentation]. NASSR 2019: Romantic Elements, Chicago, IL, United States.

Conference Proceedings

Author Surname, First Initial. Second Initial. (Year). Conference paper title. In Editor First Initial. Editor Surname (Ed.), Proceedings Book Title (pp. page range of paper). Place of Publication: Publisher. Armstrong, D. B., Fogarty, G. J., & Dingsdag, D. (2007). Scales measuring characteristics of small business information systems. In W-G. Tan (Ed.), Proceedings of Research, Relevance and Rigour: Coming of age: 18th Australasian Conference on Information Systems (pp. 163-171). Toowoomba, Australia: University of Southern Queensland.

Thesis

Author, A. A. (date). Title of doctoral dissertation or master's thesis (Doctoral dissertation or Master's thesis). Available from Name of database. (Accession or Order No.)

Pflieger, J. C. (2009). Adolescents' parent and peer relations and romantic outcomes in young adulthood (Doctoral dissertation). Available from ProQuest Dissertations & Theses Global database. (UMI No. 3371229)

Preparation of Figures
Upon submission of an article, authors are supposed to include all figures and tables in the PDF file of the manuscript. Figures and tables should not be submitted in separate files. If the article is accepted, authors will be asked to provide the source files of the figures. Each figure should be supplied in a separate electronic file. All figures should be cited in the paper in a consecutive order. Figures should be supplied in either vector art formats (Illustrator, EPS, WMF, FreeHand, CorelDraw, PowerPoint, Excel, etc.) or bitmap formats (Photoshop, TIFF, GIF, JPEG, etc.). Bitmap images should be of 300 dpi resolution at least unless the resolution is intentionally set to a lower level for scientific reasons. If a bitmap image has labels, the image and labels should be embedded in separate layers.

Preparation of Tables
Tables should be cited consecutively in the text. Every table must have a descriptive title and if numerical measurements are given, the units should be included in the column heading. Vertical rules should not be used.

Proofs
Corrected proofs must be returned to the publisher within 2-3 days of receipt. The publisher will do everything possible to ensure prompt publication. It will therefore be appreciated if the manuscripts and figures conform from the outset to the style of the journal.

Authorship Criteria
All persons designated as authors should qualify for authorship, and all those who qualify should be listed. Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content. One or more authors should take responsibility for the integrity of the work as a whole, from inception to published article.

Authorship credit should be based only on; (1) substantial contributions to conception and design, or acquisition of data, or analysis and interpretation of data, (2) drafting the article or revising it critically for important intellectual content, and (3) final approval of the version to be published. Conditions 1, 2, and 3 must all be met. Acquisition of funding, the collection of data, or general supervision of the research group, by themselves, do not justify authorship. All others who contributed to the work who are not listed as authors should be named in the acknowledgments, and their contribution should be described. Authorship of multicenter trials is attributed to a group. All members of the group who are named as authors should fully meet the above criteria for authorship. Group members who do not meet these criteria should be listed, with their permission, in the acknowledgments. Financial and material support should also be acknowledged.

All statements and opinions expressed in the manuscripts published in Journal of Advances in Manufacturing reflect the views of the author(s). All liability for the advertisements rests with the appropriate organization(s). The Editor-in-Chief, and Kare Publishing do not accept any responsibility for claims made in articles or advertisements.

Copyright Statement
The author(s) agrees that:

The manuscript submitted is his/her/their own original work, and has not been plagiarized from any prior work,

all authors participated in the work in a substantive way, and are prepared to take public responsibility for the work,

all authors have seen and approved the manuscript as submitted,

the manuscript has not been published and is not being submitted or considered for publication elsewhere,

the text, illustrations, and any other materials included in the manuscript do not infringe upon any existing copyright or other rights of anyone.

Journal of Advances in Manufacturing Engineering (Yildiz Technical University) will publish the content under Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license that gives permission to copy and redistribute the material in any medium or format other than commercial purposes as well as remix, transform and build upon the material by providing appropriate credit to the original work.

The Contributor(s) or, if applicable the Contributor’s Employer, retain(s) all proprietary rights in addition to copyright, patent rights.

Ethics & Policies

Archiving Policy
The content published by the Journal of Advances in Manufacturing Engineering and Technologies is electronically preserved by using Internet Archive. (https://jame.yildiz.edu.tr/archive).

Authorship Policy
Each individual listed as an author should fulfill the authorship criteria. The authorship should be based on the following 4 criteria:

Substantial contributions to the conception or design of the work, or the acquisition, analysis, or interpretation of data for the work; AND

Drafting the work or revising it critically for important intellectual content; AND

Final approval of the version to be published; AND

Agreement to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.

In addition to being accountable for their own work, authors should have confidence in the integrity of the contributions of their co-authors and each author should be able to identify which co-authors are responsible for other parts of the work.

All of those designated as authors should meet all four criteria for authorship, and all who meet the four criteria should be identified as authors. Those who provided a contribution but do not meet all four criteria should be recognized separately on the title page and in the Acknowledgements section at the conclusion of the manuscript.

The Journal of Advances in Manufacturing Engineering and Technologies requires that corresponding authors submit a signed and scanned version of the authorship contribution form (available for download through) during the initial submission process in order to appropriately indicate and observe authorship rights and to prevent ghost or honorary authorship. Please note that the list of authors on the final manuscript will be presented in the order provided on this form. If the editorial board suspects a case of “gift authorship,” the submission will be rejected without further review. As part of the submission of the manuscript, the corresponding author should also send a short statement declaring that they accept all responsibility for authorship during the submission and review stages of the manuscript.

Complaint and Appeal Policy
Appeal and complaint cases are handled within the scope of COPE guidelines by the Editorial Board of the journal. Appeals should be based on the scientific content of the manuscript. The final decision on the appeal and complaint is made by Editor in Chief. An Ombudsperson or the Ethical Editor is assigned to resolve cases that cannot be resolved internally. Authors should get in contact with the Editor in Chief regarding their appeals and complaints via e-mail at kare@karepb.com

Corrections Policy
If the editors or publisher learn from a third party that a published work contains a material error or inaccuracy, the authors must promptly correct or retract the article or provide the journal editors with evidence of the accuracy of the article.

Ethics Policy
The Editorial Board of the Journal of Advances in Manufacturing Engineering and Technologies and the Publisher adheres to the principles of the Council of Science Editors (CSE), the Committee on Publication Ethics (COPE), the International Council of Medical Journal Editors (ICMJE), the World Association of Medical Editors (WAME), the US National Library of Medicine (NLM), and the European Association of Science Editors (EASE).

If the submitted manuscript does not include ethics committee approval, it will be reviewed according to COPE's guideline (Guidance for Editors: Research, Audit and Service Evaluations). If the study should have ethical approval, authors will be asked to provide ethical approval in order to proceed the review process. If they cannot provide ethical approval, their manuscript will be rejected and also their institutions and when needed, the related bodies in their country will be informed that such studies must have ethics committee approval. If they provide approval, review of the manuscript will continue.

If the study does not need ethics committee approval after the editorial board’s review, the authors will be asked to provide an ethics committee approval or a document given by a related independent committee that indicates the study does not need ethics committee approval according to the research integrity rules in their country. If the authors provide either an approval or a document showing that ethics approval is not needed, the review process can be continued. If the authors cannot provide either documents, the manuscript may be rejected.

Fee Waiver Policy
There is no fee waiver.

Funding Sources Policy
All authors are required to declare what support they received to carry out their research. Declaring funding sources acknowledges funders’ contributions, fulfills funding requirements, and promotes greater transparency in the research process.

Each author must individually declare all sources of funding received for the research submitted to the journal. This information includes the name of granting agencies, grant numbers, and a description of each funder’s role. If the funder has played no role in the research, this must be stated as well.

Authors are not required to provide the complete list of every single grant that supports them if the grant is not related to the research published.

Licenses and Copyright Policy
The author(s) retain the copyright of the article and give the journal the first publication right. Author(s) publishing with the journal their work licensed under the Creative Commons Attribution-NonCommercial 4.0 International license (CC BY-NC 4.0) and grant the Publisher non-exclusive commercial right to publish the work. CC BY-NC 4.0 license permits unrestricted, non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Open Access Policy
The Journal of Advances in Manufacturing Engineering and Technologies supports the Budapest Open Access Initiative statement of principles that promotes free access to research literature. The declaration defines open access to academic literature as free availability on the internet, permitting users to read, record, copy, print, search, or link to the full text, examine them for indexing, use them as data for software or other lawful purposes without financial, legal, or technical barriers. Information sharing represents a public good, and is essential to the advancement of science. Therefore, articles published in this journal are available for use by researchers and other readers without permission from the author or the publisher provided that the author and the original source are cited. The articles in the Journal of Advances in Manufacturing Engineering and Technologies are accessible through search engines, websites, blogs, and other digital platforms. Additional details on the Budapest Open Access Initiative and their guidelines are available at https://www.budapestopenaccessinitiative.org.

Open Access Policy is based on rules of Budapest Open Access Initiative the Journal of Advances in Manufacturing Engineering and Technologies applies the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license to articles we publish. If you submit your paper for publication, you agree to have the CC BY-NC 4.0 license applied to your work. Under this Open Access license, you as the author agree that anyone can copy, distribute or reuse the content of your article for non-commercial purposes for free as long as the author and original source are properly cited. The corresponding author must sign the Creative Commons License Agreement after their articles are accepted.

Open Access Statement
The journal is an open access journal and all content is freely available without charge to the user or his/her institution. Except for commercial purposes, users are allowed to read, download, copy, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the BOAI definition of open access. The open access articles in the journal are licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.

Peer Review Policy
Only those manuscripts approved by its every individual author and that were not published before in or sent to another journal, are accepted for evaluation.

Submitted manuscripts that pass preliminary control are scanned for plagiarism using iThenticate software. After plagiarism check, the eligible ones are evaluated by Editor-in-Chief for their originality, methodology, the importance of the subject covered and compliance with the journal scope. Editor-in-Chief evaluates manuscripts for their scientific content without regard to ethnic origin, gender, sexual orientation, citizenship, religious belief or political philosophy of the authors and ensures a fair double-blind peer review of the selected manuscripts. (Journal of Advances in Manufacturing Engineering utilizes a double-blind peer review process where both the identities of reviewers and authors are anonymous.)

The selected manuscripts are sent to at least two national/international referees for evaluation and publication decision is given by Editor-in-Chief upon modification by the authors in accordance with the referees’ claims.

Editor-in-Chief does not allow any conflicts of interest between the authors, editors and reviewers and is responsible for final decision for publication of the manuscripts in the Journal.

Reviewers’ judgments must be objective. Reviewers’ comments on the following aspects are expected while conducting the review.

Does the manuscript contain new and significant information?
Does the abstract clearly and accurately describe the content of the manuscript?
Is the problem significant and concisely stated?
Are the methods described comprehensively?
Are the interpretations and consclusions justified by the results?
Are adequate references made to other Works in the field?
Is the language acceptable?
Reviewers must ensure that all the information related to submitted manuscripts is kept as confidential and must report to the editor if they are aware of copyright infringement and plagiarism on the author’s side.

A reviewer who feels unqualified to review the topic of a manuscript or knows that its prompt review will be impossible should notify the editor and excuse himself from the review process.

The editor informs the reviewers that the manuscripts are confidential information and that this is a privileged interaction. The reviewers and editorial board cannot discuss the manuscripts with other persons. The anonymity of the referees is important.

Editorial Board Members' Submission and Review Process

• In cases where a member of the Editorial Board is an author or co-author of a submitted manuscript, strict conflict of interest protocols are followed.
• The involved Editorial Board member will be completely excluded from the review process of their submission.
• An independent review coordinator, not affiliated with the Editorial Board, will be appointed to manage the peer-review process for such submissions.
• The identity of the reviewers will remain confidential, adhering to our double-blind review policy.
• Editorial Board members will not have access to any information or discussion related to the evaluation of their manuscript.
• Decisions on these manuscripts will be made based on the same criteria and rigorous review process applied to all other submissions, ensuring fairness and impartiality.
• Only one article per year can be published by the Editorial Board members.

Plagiarism Policy
All submissions are screened using similarity detection software at least two times: on submission and after completing revisions. In the event of alleged or suspected research misconduct, e.g., plagiarism, citation manipulation, or data falsification/fabrication, the editorial board will follow and act in accordance with COPE guidelines. Plagiarism, including self-plagiarism, that is identified at any stage will result in rejection of the manuscript.

Publication Charges Policy
The Journal of Advances in Manufacturing Engineering and Technologies assesses no submission fees, publication fees, or page charges.

Retraction Policy
The publisher will take all appropriate measures to modify the article in question, in close cooperation with the editors, in cases of alleged or proven scientific misconduct, fraudulent publication, or plagiarism. This includes the prompt publication of an erratum, disclosure, or retraction of the affected work in the most severe case. Together with the editors, the publisher will take reasonable steps to detect and prevent the publication of articles in which research misconduct occurs and will under no circumstances promote or knowingly allow such abuse to occur.

Withdrawal Policy
The Journal of Advances in Manufacturing Engineering and Technologies is committed to providing high quality articles and uphold the publication ethics to advance the intellectual agenda of science. We expect our authors to comply with, best practice in publication ethics as well as in quality of their articles.

Withdrawal of a manuscript will be permitted only for the most compelling and unavoidable reasons. For withdrawal of a manuscript authors need to submit an "Article withdrawal Form", signed by all authors mentioning the reason for withdrawal to the Editorial Office. The form is available from the web page of the journal. Authors must not assume that their manuscript has been withdrawn until they have received appropriate notification to this effect from the editorial office.

In a case where a manuscript has taken more than five months’ time for review process, that allows the author to withdraw manuscript.

Manuscript withdrawal penalty: After receiving the Article withdrawal Form, the Journal of Advances in Manufacturing Engineering and Technologies Editorial Board will investigate the reason of withdrawal.

If the reason finds to be acceptable, the author is allowed to withdraw the manuscript without paying any withdrawal penalty. If not the Journal of Advances in Manufacturing Engineering and Technologies will not accept any manuscripts from the same author for one year.

Important notes: Manuscripts may be withdrawn at any stage of review and publication process by submitting a request to the editorial office. Manuscript withdrawal will be permitted after submission only for the most compelling and unavoidable reasons.

If the author wants to withdraw a manuscript, the author needs to submit a completed "Article withdrawal Form", signed by all authors of the manuscript stating the reasons for manuscript withdrawal.

The manuscript will not be withdrawn from publication process until a completed, signed form is received by the editorial office. Authors must not assume that their manuscript has been withdrawn until they have received appropriate notification to this effect from the Journal of Advances in Manufacturing Engineering and Technologies editorial office.