Endüstriyel Atık Çamurlardan Elde Edilen Vitrifiye Ürünlerle İlgili Bir Değerlendirme

Bengisu Bozkurt; Zerrin Günkaya; Aysun Özkan; Göktuğ Günkaya; Mufide Banar

doi:10.7240/jeps.918430

Endüstriyel Atık Çamurlardan Elde Edilen Vitrifiye Ürünlerle İlgili Bir Değerlendirme

Abstract

Endüstriyel faaliyetler sonucu oluşan arıtma çamurlarının geri kazanımı, arıtımı veya bertarafı tüm dünyada en önemli çevresel sorunlar arasındadır. Atık çamurların yönetiminde yaygın olarak kullanılan yakma, depolama, susuzlaştırma veya tarım alanlarında kullanma gibi yöntemler bu atıkların içerisindeki ağır metallerin uzaklaştırılmasında yetersiz kalmaktadır. Bu atıkların çevre için risk oluşturması ve arıtma maliyetleri gibi sorunların yanı sıra doğal kaynakların da her geçen yıl azaldığı düşünüldüğünde, oluşan atık çamurların değerlendirilerek ikincil malzemelere dönüştürülmesinin önemi artmaktadır. Bu bağlamda vitirifikasyon yöntemi, atıklardan yapı malzemeleri (cam-seramik, tuğla, pigment vb.) üretmenin yanı sıra atıkların içerisindeki ağır metallerin stabilizasyonunu da sağlayan, döngüsel ekonomi yaklaşımıyla örtüşen bir yöntem olarak dikkati çekmektedir. Bu makalede, endüstriyel artıma çamurlarının katma değeri olan ürünlere dönüştürülmesi noktasında, arıtma çamurlarının vitrifikasyonu ve vitrifiye ürünlerin kullanım alanları ile ilgili çalışmalar incelenmiştir.

Keywords

Supporting Institution

Eskişehir Teknik Üniversitesi, TÜBİTAK

Project Number

Eskişehir Teknik Üniversitesi 20ADP186, TÜBİTAK 120Y059

Thanks

Bu çalışma, Eskişehir Teknik Üniversitesi Bilimsel Araştırma Projeleri Komisyonu Başkanlığı (Proje No: 20ADP186) ve TÜBİTAK (Proje No: 120Y159) tarafından desteklenmiştir.

References

[1] Christodoulou, A. ve Stamatelatou, K. (2016). Overview of legislation on sewage sludge management in developed countries worldwide. Water Sci. Technol, 73, 453–462.
[2] Yang, G., Zhang, G. ve Wang, H. (2015). Current state of sludge production, management, treatment and disposal in China. Water Res, 78, 60–73.
[3] Zaker, A., Chen, Z., Wang, X. ve Zhang, Q. (2019). Microwave-assisted pyrolysis of sewage sludge: a review. Fuel Process. Technol, 187, 84–104.
[4] Maiden, P., Hearn, M., Boysen, R., Chier, P., Warnecke, M. ve Jackson, W. (2015). Alum Sludge Re-Use, Investigation (10OS-42) Prepared by GHD and Centre for Green Chemistry (Monash University) for The Smart Water Fund. Victoria, ACTEW Water & Seawater, Melbourne, Australia.
[5] Zhang, Q., Hu, J., Lee, D.-J., Chang, Y. ve Lee, Y.-J. (2017). Sludge treatment: current research trends. Bioresour. Technol, 243, 1159–1172.
[6] Lynn, C.J., Dhir, R.K. ve Ghataora, G.S. (2016). Sewage sludge ash characteristics and potential for use in bricks, tiles and glass ceramics. Water Sci. Technol, 74, 17–29.
[7] T.C. Çevre ve Şehircilik Bakanlığı (2020). 2018 Yılı Tehlikeli Atık İstatistikleri Bülteni.
[8] T.C. Çevre ve Şehircilik Bakanlığı (2017). Ulusal Atık Yönetimi ve Eylem Planı (2016–2023).

[9] Tang, Y., Wu, P., Shih, K. ve Liao, C. (2019). Industrial sludge for ceramic products and its benefit for metal stabilization. Industrial and Municipal Sludge, 253–293.
[10] Kulkarni, V. V., Golder, A. K. ve Ghosh, P. K. (2019). Production of composite clay bricks: A value-added solution to hazardous sludge through effective heavy metal fixation. Construction and Building Materials, 201, 391–400.
[11] Salan, T. (2014). Atıksu Arıtma Çamurlarının Türkiye'deki Durumu ve Enerji Üretiminde Değerlendirilme Olanakları. ICCI 2014, Conference Paper, 190–195.
[12] Mininni, G., Blanch, A., Lucena, F. ve Berselli, S. (2015). EU policy on sewage sludge utilization and perspectives on new approaches of sludge management. Environ. Sci. Pollut. Res, 22 (10), 7361–7374.
[13] Gherghel, A., Teodosiu, C. ve De Gisi, S. (2019). A review on wastewater sludge valorisation and its challenges in the context of circular economy. J. Cleaner Prod.
[14] Lynn, C.J., Dhir, R.K., Ghataora, G.S. ve West, R.P. (2015). Sewage sludge ash characteristics and potential for use in concrete. Constr. Build. Mater, 98, 767–779.
[15] Świerczek, L., Cieślik, B. M. ve Konieczka, P. (2018). The potential of raw sewage sludge in construction industry – A review. Journal of Cleaner Production, 200, 342–356.
[16] Chen, Y., Zhang, Y., Chen, T., Zhao, Y. ve Bao, S. (2011). Preparation of eco-friendly construction bricks from hematite tailings. Constr. Build. Mater, 25 (4), 2107–2111.
[17] Smol, M., Kulczycka, J., Henclik, A., Gorazda, K. ve Wzorek, Z. (2015). The possible use of sewage sludge ash (SSA) in the construction industry as a way towards a circular economy. J. Clean. Prod, 95, 45–54.
[18] Supino, S., Malandrino, O., Testa, M. ve Sica, D. (2016). Sustainability in the EU cement industry: the Italian and German experiences. J. Clean. Prod, 112, 430–442.
[19] Jantzen, C. M. (2011). Historical development of glass and ceramic waste forms for high level radioactive wastes. Handbook of Advanced Radioactive Waste Conditioning Technologies, 159–172.
[20] Bernardo, E., Scarinci, G. ve Colombo, P. (2017). Vitrification of Waste and Reuse of Waste-Derived Glass. Encyclopedia of Sustainability Science and Technology, 1–34.
[21] Climate Policy Watcher, Ex Situ And In Situ Vitrification, https://www.climate-policy-watcher.org/industrial-wastes/ex-situ-and-in-situ-vitrification.html, (Nisan 2021).
[22] Meegoda, J. N., Ezeldin, A. S., Fang, H.-Y. ve Inyang, H. I. (2003). Waste Immobilization Technologies. Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management, 7(1), 46–58.
[23] Cieślik, B.M., Namieśnik, J. ve Konieczka, P. (2015). Review of sewage sludge management: standards, regulations and analytical methods. J. Cleaner Prod, 90, 1–15.
[24] De Carvalho Gomes, S., Zhou, J. L., Li, W. ve Long, G. (2019). Progress in manufacture and properties of construction materials incorporating water treatment sludge: A review. Resources, Conservation and Recycling, 145, 148–159.
[25] USEPA (1992). SW-846 Test Method 1311: Toxicity Characteristic Leaching Procedure (TCLP).
[26] Buelt, J. L. ve Farnsworth, R. K. (1991). In Situ Vitrification of Soils Containing Various Metals. Nuclear Technology, 96(2), 178–184.
[27] Byers, M. G., FitzPatrick, V. F. ve Holtz, R. D. (1991). Site Remediation by In Situ Vitrification. Transportation Research Record, 1312, 162–166.
[28] USEPA (1989). Innovative Technology: In-Situ Vitrification. Solid Waste and Emergency Response, Directive 9200.5-251FS.
[29] Climate Policy Watcher, Electric Furnace Vitrification System, https://www.climate-policy-watcher.org/industrial-wastes/figure-5-electric-furnace-vitrification-system-courtesy-of-usepa.html, (Nisan 2021).
[30] Bernardo, E. ve Dal Maschio, R. (2011). Glass–ceramics from vitrified sewage sludge pyrolysis residues and recycled glasses. Waste Management, 31(11), 2245–2252.
[31] Vernaz, E., Gin, S. ve Veyer, C. (2012). Waste Glass. Comprehensive Nuclear Materials, 5, 451–483.
[32] Borowski, G. (2012). Suitability Tests of Fly Ashes Vitrification from Sewage Sludge Incineration. Archives of Environmental Protection, 38(2).
[33] Chinnam, R.K., Francis, A.A., Will, J., Bernardo, E. ve Boccaccini, A.R. (2013). Review. Functional glasses and glass-ceramics derived from iron rich waste and combination of industrial residues. J. Non Cryst. Solids, 365, 63–74.
[34] Garcia-Valles, M., Avila, G., Martinez, S., Terradas, R. ve Nogués, J. M. (2007). Heavy metal-rich wastes sequester in mineral phases through a glass–ceramic process. Chemosphere, 68(10), 1946–1953.
[35] Silva, A. C., Mello-Castanho, S., Guitian, F., Montero, I., Esteban-Cubillo, A., Sobrados, I., Sanz, J. ve Moya, J. S. (2008). Incorporation of Galvanic Waste (Cr, Ni, Cu, Zn, Pb) in a Soda–Lime–Borosilicate Glass. Journal of the American Ceramic Society, 91(4), 1300–1305.
[36] Pan, D. A., Li, L. J., Yang, J., Bu, J. B., Guo, B., Liu, B., Zhang, S. G. ve Volinsky, A. A. (2015). Production of glass–ceramics from heavy metal gypsum and pickling sludge. International Journal of Environmental Science and Technology, 12(9), 3047–3052.
[37] Özdemir, Ö.D., Figen, A.K. ve Pişkin S. (2011). Utilization of Galvanic Sludge as Raw Material for Production of Glass. International Conference on Chemistry and Chemical Process, 10, 45–49.
[38] Yang, J., Zhang, S.-G., Pan, D.-A., Liu, B., Wu, C.-L. ve Volinsky, A. A. (2016). Treatment method of hazardous pickling sludge by reusing as glass–ceramics nucleation agent. Rare Metals, 35(3), 269–274.
[39] Mymrin, V., Alekseev, K., Catai, R. E., Nagalli, A., Aibuldinov, Y. K., Bekturganov, N. S., Rose, J. L. ve Izzo, R. L. S. (2016). Red ceramics from composites of hazardous sludge with foundry sand, glass waste and acid neutralization salts. Journal of Environmental Chemical Engineering, 4(1), 753–761.
[40] Felisberto, R., Santos, M. C., Arcaro, S., Basegio, T. M. ve Bergmann, C. P. (2018). Assessment of environmental compatibility of glass–ceramic materials obtained from galvanic sludge and soda–lime glass residue. Process Safety and Environmental Protection, 120, 72–78.
[41] Starostina, I., Simonov, M., Volodchenko, A., Starostina, Y., Fomin, A. ve Fokina, E. (2018). The usage of iron-containing sludge wastes in ceramic bricks production. IOP Conference Series: Materials Science and Engineering, 365, 032066.
[42] Ballesteros, S., Rincón-Mora, B., Jordán, M.M. ve Rincón, J.Ma. (2019). Vitrification of a sodium chromate waste and mechanical properties of a final glass-ceramic. Materials Letters: X, 100025.
[43] Tan, S., Kirk, N., Marshall, M., McGann, O. ve Hand, R. J. (2019). Vitrification of an intermediate level Magnox sludge waste. Journal of Nuclear Materials, 515, 392–400.
[44] Anderson, M., Biggs, A. ve Winters, C. (2003). Use of two blended water industry by-product wastes as a composite substitute for traditional raw materials used in clay brick manufacture. Recycling and Reuse of Waste Materials, 417–426.
[45] Teixeira, S., Santos, G., Souza, A., Alessio, P., Souza, S. ve Souza, N. (2011). The effect of incorporation of a Brazilian water treatment plant sludge on the properties of ceramic materials. Appl. Clay Sci, 53 (4), 561–565.
[46] Kizinievič, O., Žurauskienė, R., Kizinievič, V. ve Žurauskas, R. (2013). Utilisation of sludge waste from water treatment for ceramic products. Constr. Build. Mater, 41, 464–473.
[47] Wolff, E., Schwabe, W.K. ve Conceição, S.V. (2015). Utilization of water treatment plant sludge in structural ceramics. J. Clean. Product, 96, 282–289.
[48] Weng, C.-H., Lin, D.-F. ve Chiang, P.-C. (2003). Utilization of sludge as brick materials. Adv. Environ. Res, 7 (3), 679–685.
[49] Mao, L., Wu, Y., Zhang, W. ve Huang, Q. (2019). The reuse of waste glass for enhancement of heavy metals immobilization during the introduction of galvanized sludge in brick manufacturing. Journal of Environmental Management, 231, 780–787.
[50] Zhang, M., Chen, C., Mao, L. ve Wu, Q. (2018). Use of electroplating sludge in production of fired clay bricks: Characterization and environmental risk evaluation. Construction and Building Materials, 159, 27–36.
[51] Gargori, C., Prim, S. R., LLusar, M., Folgueras, M. V. ve Monrós, G. (2018). Recycling of Cr/Ni/Cu plating wastes as black ceramic pigments. Materials Letters, 218, 341–345.
[52] Mitiu, M.A., Marcus, M.I., Vlad, M. ve Balaceanu, C.M. (2018). Stability of Ceramic Glazes Obtained by Valorification of Anorganic Pigments Extracted from Electroplating Sludge. Revista de Chimie, 69(3), 571–574.
[53] Carneiro, J., Tobaldi, D. M., Capela, M. N., Novais, R. M., Seabra, M. P. ve Labrincha, J. A. (2018). Synthesis of ceramic pigments from industrial wastes: Red mud and electroplating sludge. Waste Management, 80, 371–378.
[54] Chou, I.-C., Kuo, Y.-M., Lin, C., Wang, J.-W., Wang, C.-T. ve Chang-Chien, G.-P. (2012). Electroplating sludge metal recovering with vitrification using mineral powder additive. Resources, Conservation and Recycling, 58, 45–49.
[55] Huang, R., Huang, K.-L., Lin, Z.-Y., Wang, J.-W., Lin, C. ve Kuo, Y.-M. (2013). Recovery of valuable metals from electroplating sludge with reducing additives via vitrification. Journal of Environmental Management, 129, 586–592.
[56] Al Hoseny, N. F., Amin, S. K., Fouad, M. M. K. ve Abadir, M. F. (2018). Reuse of ceramic sludge in the production of vitrified clay pipes. Ceramics International, 44(11), 12420–12425.
[57] Nandi, V. S., Raupp-Pereira, F., Montedo, O. R. K. ve Oliveira, A. P. N. (2015). The use of ceramic sludge and recycled glass to obtain engobes for manufacturing ceramic tiles. Journal of Cleaner Production, 86, 461–470.

Details

Primary Language

Turkish

Subjects

Engineering

Journal Section

Research Article

Authors

Bengisu Bozkurt
0000-0001-6127-3211
Türkiye

Zerrin Günkaya ^*
0000-0002-7553-9129
Türkiye

Aysun Özkan
0000-0003-1036-7570
Türkiye

Göktuğ Günkaya
0000-0002-0821-7170
Türkiye

Mufide Banar
0000-0003-2795-6208
Türkiye

Publication Date

March 30, 2022

Submission Date

April 20, 2021

Acceptance Date

October 16, 2021

Published in Issue

Year 2022 Volume: 34 Number: 1

DOI

https://doi.org/10.7240/jeps.918430

IZ

https://izlik.org/JA78TT72SR

Cite

RIS / Bibtex

APA

Bozkurt, B., Günkaya, Z., Özkan, A., Günkaya, G., & Banar, M. (2022). Endüstriyel Atık Çamurlardan Elde Edilen Vitrifiye Ürünlerle İlgili Bir Değerlendirme. International Journal of Advances in Engineering and Pure Sciences, 34(1), 27-37. https://doi.org/10.7240/jeps.918430

AMA

1.Bozkurt B, Günkaya Z, Özkan A, Günkaya G, Banar M. Endüstriyel Atık Çamurlardan Elde Edilen Vitrifiye Ürünlerle İlgili Bir Değerlendirme. JEPS. 2022;34(1):27-37. doi:10.7240/jeps.918430

Chicago

Bozkurt, Bengisu, Zerrin Günkaya, Aysun Özkan, Göktuğ Günkaya, and Mufide Banar. 2022. “Endüstriyel Atık Çamurlardan Elde Edilen Vitrifiye Ürünlerle İlgili Bir Değerlendirme”. International Journal of Advances in Engineering and Pure Sciences 34 (1): 27-37. https://doi.org/10.7240/jeps.918430.

EndNote

Bozkurt B, Günkaya Z, Özkan A, Günkaya G, Banar M (March 1, 2022) Endüstriyel Atık Çamurlardan Elde Edilen Vitrifiye Ürünlerle İlgili Bir Değerlendirme. International Journal of Advances in Engineering and Pure Sciences 34 1 27–37.

IEEE

[1]B. Bozkurt, Z. Günkaya, A. Özkan, G. Günkaya, and M. Banar, “Endüstriyel Atık Çamurlardan Elde Edilen Vitrifiye Ürünlerle İlgili Bir Değerlendirme”, JEPS, vol. 34, no. 1, pp. 27–37, Mar. 2022, doi: 10.7240/jeps.918430.

ISNAD

Bozkurt, Bengisu - Günkaya, Zerrin - Özkan, Aysun - Günkaya, Göktuğ - Banar, Mufide. “Endüstriyel Atık Çamurlardan Elde Edilen Vitrifiye Ürünlerle İlgili Bir Değerlendirme”. International Journal of Advances in Engineering and Pure Sciences 34/1 (March 1, 2022): 27-37. https://doi.org/10.7240/jeps.918430.

JAMA

1.Bozkurt B, Günkaya Z, Özkan A, Günkaya G, Banar M. Endüstriyel Atık Çamurlardan Elde Edilen Vitrifiye Ürünlerle İlgili Bir Değerlendirme. JEPS. 2022;34:27–37.

MLA

Bozkurt, Bengisu, et al. “Endüstriyel Atık Çamurlardan Elde Edilen Vitrifiye Ürünlerle İlgili Bir Değerlendirme”. International Journal of Advances in Engineering and Pure Sciences, vol. 34, no. 1, Mar. 2022, pp. 27-37, doi:10.7240/jeps.918430.

Vancouver

1.Bengisu Bozkurt, Zerrin Günkaya, Aysun Özkan, Göktuğ Günkaya, Mufide Banar. Endüstriyel Atık Çamurlardan Elde Edilen Vitrifiye Ürünlerle İlgili Bir Değerlendirme. JEPS. 2022 Mar. 1;34(1):27-3. doi:10.7240/jeps.918430

Cited By

Mikrobiyal Yakıt Hücresinde Nişasta İçerikli Atığın Oksidasyonu ile Elektrik Üretimi

Journal of Advanced Research in Natural and Applied Sciences

https://doi.org/10.28979/jarnas.1180458