An Sem Study of Pp/Pet Blends

Year 2016, Volume: 1 Issue: 3, 127 - 131, 27.12.2016

Fatma Kosovalı Çavuş Murat Beken Yeşim Özcanlı

https://doi.org/10.30931/jetas.297612

Cited By: 1

Abstract

In this study, the morphology and spectroscopic properties of polypropylene (PP)/
polyethyleneterephthalate (PET) blends were investigated by PET addition to improve the mechanical
properties of polypropylene. For the morphological characteristics of the PP + PET blends, SEM
analysis for the spectroscopic properties and FT-IR analysis were performed. As the percentage of the
mixture increases in the SEM images, there is a gap between the PET and the structure depending on
the addition ratio. In the PP + 40% PET mixture, the transition from droplet form to fibril form appears
clearly in the structure.

Keywords

Polymer, PP/PET blends, morphology

References

• [1] Si X., “Preparation and study of polypropylene/polyethyleneterephthalate composite fibres.”, Composites Science and Technology 68 (2008): 2943–2947
• [2] Torunoğlu Turan G., “Preparation and characterization of poly(ethyleneterephthalate) – polypropylene blends”(PhD Diss. , University of Istanbul Technical, 2012).
• [3] Mirjalili, F., “Enhancing the Dyeability of Polypropylene Fibers by Melt Blending with Polyethylene Terephthalate.”, The Scientific World Journal, 2013.
• [4] Çam, Ç., “Productıon Of Surface Coatıng Materıals From Post-Consumer Pet Bottles ”, (M.Sc. Diss., University of Instanbul, 2015).
• [5] Gartner, C., et al. ”Grafting of Maleic Anhyride on Polyproplene and ıts effect on blending with poly(ethylene terephthalate.” 48(2008):1910-1916.
• [6] Kosovalı Çavuş F., “Modelling of Mechanical Properties of PP/PET Blends with Artificial Neural Networks” (paper presented at 9th International Physics Conference of the Balkan Physical Union – BPU9, Istanbul, Turkey, August 24 – 27, 2015)