Determination of Yield Performance Along with Morphological, Physiological and Quality Characteristics of Some Native Hemp (Cannabis sativa L.) Genotypes

Rıza Paslı; Selim Aytaç

Determination of Yield Performance Along with Morphological, Physiological and Quality Characteristics of Some Native Hemp (Cannabis sativa L.) Genotypes

Abstract

This study was conducted in 2020 at the Research and Application Area of the Faculty of Agriculture, Ondokuz Mayıs University, in order to determine the yield performance together with the morphological, physiological, and quality characteristics of some native hemp genotypes. The experiment was established according to a randomized complete block design with three replications. The native lines used in the study were obtained by selection from populations collected from hemp growers in the provinces of Samsun, Amasya, and Kastamonu during 2013–2014. As plant material, 5 native hemp genotypes (Narlı-3, Narlı-7, Narlı-8, Narlı-12, and Narlı-14) and 2 foreign-origin cultivars (Santhica-27 and Futura-75) were used. In the study, traits such as flowering period, male and female plant ratio, technical stem length, stem thickness, thousand seed weight, dry stem yield per decare, and fiber yield per decare were investigated together with tetrahydrocannabinol (THC) and cannabidiol (CBD) contents. The findings revealed that native hemp lines exhibited superior performance compared to foreign-origin cultivars in terms of technical stem length, stem and fiber yield, and thousand seed weight. Considering the THC limit of 0.2% and below accepted as the European Union standard in industrial hemp production, it is known that the foreign-origin cultivars used in the study comply with this standard. Similarly, it was determined that the THC content of all native lines evaluated in the study was below 0.2%. As a result, the native hemp genotypes examined within the scope of the research were found to be important genetic resources that can be utilized in industrial hemp breeding studies.

Keywords

References

Abidi, N., Cabrales, L., & Haigler, C. H. (2014). Changes in the cell wall and cellulose content of developing cotton fibers investigated by FTIR spectroscopy. Carbohydrate Polymers, 100, 9-16. https://doi.org/10.1016/j.carbpol.2013.01.074
Agrebi, F., Ghorbel, N., Bresson, S., Abbas, O., & Kallel, A. (2019). Study of nanocomposites based on cellulose nanoparticles and natural rubber latex by ATR/FTIR spectroscopy: The impact of reinforcement. Polymer Composites, 40(5), 2076-2087. https://doi.org/10.1002/pc.24989
An, X., Zhu, Z., Luo, X., Chen, C., Liu, T., Zou, L., Li, S., & Liu, Y. (2025). Effects of Raw Materials and Pyrolysis Temperatures on Physicochemical Properties of Biochars Derived from Hemp Stalks. Plants, 14(16), 2564. https://doi.org/10.3390/plants14162564
Antil, B., Elkasabi, Y., Strahan, G. D., & Vander Wal, R. L. (2025). Development of graphitic and non-graphitic carbons using different grade biopitch sources. Carbon, 232, 119770. https://doi.org/10.1016/j.carbon.2024.119770
Assirelli, A., Fischetti, E., Scarfone, A., Santangelo, E., Carnevale, M., Paris, E., Palma, A., & Gallucci, F. (2025). Characterization of Hemp Hurd-Derived Biochar for Potential Agricultural Applications. Agronomy, 15(9), 2136. https://doi.org/10.3390/agronomy15092136
Atinafu, D. G., Yun, B. Y., Wi, S., Kang, Y., & Kim, S. (2021). A comparative analysis of biochar, activated carbon, expanded graphite, and multi-walled carbon nanotubes with respect to PCM loading and energy-storage capacities. Environmental Research, 195, 110853. https://doi.org/10.1016/j.envres.2021.110853
Azargohar, R., Nanda, S., Kozinski, J. A., Dalai, A. K., & Sutarto, R. (2014). Effects of temperature on the physicochemical characteristics of fast pyrolysis bio-chars derived from Canadian waste biomass. Fuel, 125, 90-100. https://doi.org/10.1016/j.fuel.2014.01.083
Bokhari, S. M. Q., Chi, K., & Catchmark, J. M. (2021). Structural and physico-chemical characterization of industrial hemp hurd: Impacts of chemical pretreatments and mechanical refining. Industrial Crops and Products, 171, 113818. https://doi.org/10.1016/j.indcrop.2021.113818

Bowornthommatadsana, K., Klangvijit, K., Uwanno, T., Phonyiem Reilly, M., Yordsri, V., Chaiwat, W., Ichikawa, S., Obata, M., Fujishige, M., Takeuchi, K., Wongwiriyapan, W., & Endo, M. (2025). Hemp-Derived Hierarchical Porous Carbon with an Optimized Pore Structure by NaOH Activation for Supercapacitor Applications. ACS Omega, 10(44), 53596-53611. https://doi.org/10.1021/acsomega.5c10175
Chaowana, P., Hnoocham, W., Chaiprapat, S., Yimlamai, P., Chitbanyong, K., Wanitpinyo, K., Chaisan, T., Paopun, Y., Pisutpiched, S., Khantayanuwong, S., & Puangsin, B. (2024). Utilization of hemp stalk as a potential resource for bioenergy. Materials Science for Energy Technologies, 7, 19-28. https://doi.org/10.1016/j.mset.2023.07.001
Chen, C., Sun, K., Huang, C., Yang, M., Fan, M., Wang, A., Zhang, G., Li, B., Jiang, J., Xu, W., & Liu, J. (2023). Investigation on the mechanism of structural reconstruction of biochars derived from lignin and cellulose during graphitization under high temperature. Biochar, 5(1), 51. https://doi.org/10.1007/s42773-023-00229-7
Chen, T., Liu, R., & Scott, N. R. (2016). Characterization of energy carriers obtained from the pyrolysis of white ash, switchgrass and corn stover — Biochar, syngas and bio-oil. Fuel Processing Technology, 142, 124-134. https://doi.org/10.1016/j.fuproc.2015.09.034
Ciolacu, D., Ciolacu, F., & Popa, V. I. (2011). Amorphous cellulose: Structure and characterization. Cellulose Chemistry and Technology, 45(1-2), 13-21.
Clemente, J. S., Beauchemin, S., Thibault, Y., Mackinnon, T., & Smith, D. (2018). Differentiating Inorganics in Biochars Produced at Commercial Scale Using Principal Component Analysis. ACS Omega, 3(6), 6931-6944. https://doi.org/10.1021/acsomega.8b00523
Dai, D., Fan, M., Dai, D., & Fan, M. (2010). Characteristic and Performance of Elementary Hemp Fibre. Materials Sciences and Applications, 1(6), 336-342. https://doi.org/10.4236/msa.2010.16049
de Almeida, Y. A., de Fatima, I. G., Barreto, L. S., Prudente, I. N. R., & dos Santos, H. C. (2026). Carbon-based materials from renewable sources: Challenges and perspectives with a focus on green coconut. Journal of Chemical Technology & Biotechnology, 101(3), 477-493. https://doi.org/10.1002/jctb.70093
Fan, M., Li, C., Sun, Y., Zhang, L., Zhang, S., & Hu, X. (2021). In situ characterization of functional groups of biochar in pyrolysis of cellulose. Science of the Total Environment, 799, 149354. https://doi.org/10.1016/j.scitotenv.2021.149354
Fernandes, B. C. C., Mendes, K. F., Júnior, A. F. D., Caldeira, V. P. S., Teófilo, T. M. S., Silva, T. S., Mendonça, V., de Freitas Souza, M., & Silva, D. V. (2020). Impact of Pyrolysis Temperature on the Properties of Eucalyptus Wood-Derived Biochar. Materials, 13(24), 5841. https://doi.org/10.3390/ma13245841
Hu, X., Xu, J., Wu, M., Xing, Jianxiong Bi, W., Wang, K., Ma, J., & Liu, X. (2017). Effects of biomass pre-pyrolysis and pyrolysis temperature on magnetic biochar properties. Journal of Analytical and Applied Pyrolysis, 127, 196-202. https://doi.org/10.1016/j.jaap.2017.08.006
Husain, Z., Shakeelur Raheman, A. R., Ansari, K. B., Pandit, A. B., Khan, M. S., Qyyum, M. A., & Lam, S. S. (2022). Nano-sized mesoporous biochar derived from biomass pyrolysis as electrochemical energy storage supercapacitor. Materials Science for Energy Technologies, 5, 99-109. https://doi.org/10.1016/j.mset.2021.12.003
Kalla, A., Mayilswamy, N., Kandasubramanian, B., & Mahajan-Tatpate, P. (2024). Biochar: a sustainable and an eco-friendly material for energy storage applications. International Journal of Green Energy, 21(7), 1695-1709. https://doi.org/10.1080/15435075.2023.2259973
Kanchanatip, E., Prasertsung, N., Thasnas, N., Grisdanurak, N., & Wantala, K. (2022). Valorization of cannabis waste via hydrothermal carbonization: solid fuel production and characterization. Environmental Science and Pollution Research, 30(39), 90318-90327. https://doi.org/10.1007/s11356-022-24123-0
Keiluweit, M., Nico, P. S., Johnson, M., & Kleber, M. (2010). Dynamic molecular structure of plant biomass-derived black carbon (biochar). Environmental Science and Technology, 44(4), 1247-1253. https://doi.org/10.1021/es9031419
Khandaker, T., Islam, T., Nandi, A., Anik, M. A. A. M., Hossain, M. S., Hasan, M. K., & Hossain, M. S. (2025). Biomass-derived carbon materials for sustainable energy applications: a comprehensive review. Sustainable Energy & Fuels, 9(3), 693-723. https://doi.org/10.1039/D4SE01393J
Kim, P., Johnson, A., Edmunds, C. W., Radosevich, M., Vogt, F., Rials, T. G., & Labbé, N. (2011). Surface Functionality and Carbon Structures in Lignocellulosic-Derived Biochars Produced by Fast Pyrolysis. Energy and Fuels, 25(10), 4693-4703. https://doi.org/10.1021/ef200915s
Kim, S. H., Lee, C. M., & Kafle, K. (2013). Characterization of crystalline cellulose in biomass: Basic principles, applications, and limitations of XRD, NMR, IR, Raman, and SFG. Korean Journal of Chemical Engineering, 30(12), 2127-2141. https://doi.org/10.1007/s11814-013-0162-0
Kotaiah Naik, D., Monika, K., Prabhakar, S., Parthasarathy, R., & Satyavathi, B. (2017). Pyrolysis of sorghum bagasse biomass into bio-char and bio-oil products A thorough physicochemical characterization. Journal of Thermal Analysis and Calorimetry, 127(2), 1277-1289. https://doi.org/10.1007/s10973-016-6061-y
Kumar, T., Ansari, S. A., Sawarkar, R., Agashe, A., Singh, L., & Nidheesh, P. V. (2025). Bamboo biochar: a multifunctional material for environmental sustainability. Biomass Conversion and Biorefinery, 15(22), 28821-28845. https://doi.org/10.1007/s13399-025-06608-3
Lee, J. W., Hawkins, B., Day, D. M., & Reicosky, D. C. (2010). Sustainability: the capacity of smokeless biomass pyrolysis for energy production, global carbon capture and sequestration. Energy & Environmental Science, 3(11), 1695-1705. https://doi.org/10.1039/C004561F
Li, M., Tang, Y., Ren, N., Zhang, Z., & Cao, Y. (2018). Effect of mineral constituents on temperature-dependent structural characterization of carbon fractions in sewage sludge-derived biochar. Journal of Cleaner Production, 172, 3342-3350. https://doi.org/10.1016/j.jclepro.2017.11.090
Li, S., & Chen, G. (2018). Thermogravimetric, thermochemical, and infrared spectral characterization of feedstocks and biochar derived at different pyrolysis temperatures. Waste Management, 78, 198-207. https://doi.org/10.1016/j.wasman.2018.05.048
Li, W., Xu, Y., Wang, G., Xu, T., Wang, K., Zhai, S., & Si, C. (2025). Sustainable Carbon-Based Catalyst Materials Derived From Lignocellulosic Biomass for Energy Storage and Conversion: Atomic Modulation and Properties Improvement. Carbon Energy, 7(5), e708. https://doi.org/10.1002/cey2.708
Liu, J., Zhang, C., Tao, B., & Beckerman, J. (2023). Revealing the roles of biomass components in the biosorption of heavy metals in wastewater by various chemically treated hemp stalks. Journal of the Taiwan Institute of Chemical Engineers, 143, 104701. https://doi.org/10.1016/j.jtice.2023.104701
Luo, Q., Deng, Y., Li, Y., He, Q., Wu, H., & Fang, X. (2024). Effects of pyrolysis temperatures on the structural properties of straw biochar and its adsorption of tris-(1-chloro-2-propyl) phosphate. Scientific Reports, 14(1), 25711. https://doi.org/10.1038/s41598-024-77299-5
Mahmood, F., Ali, M., Khan, M., Mbeugang, C. F. M., Isa, Y. M., Kozlov, A., Penzik, M., Xie, X., Yang, H., Zhang, S., & Li, B. (2025). A review of biochar production and its employment in synthesizing carbon-based materials for supercapacitors. Industrial Crops and Products, 227, 120830. https://doi.org/10.1016/j.indcrop.2025.120830
Malabadi, R. B., Kolkar, K. P., Chalannavar, R. K., Acharya, M., & Mudigoudra, B. S. (2023). Industrial Cannabis sativa-Hemp: Biochar applications and disadvantages. World Journal of Advanced Research and Reviews, 20(1), 371-383. https://doi.org/10.5281/zenodo.12180395
Manoj, B., & Kunjomana, A. G. (2012). Study of stacking structure of amorphous carbon by X-ray diffraction technique. International Journal of Electrochemical Science, 7(4), 3127-3134. https://doi.org/10.1016/S1452-3981(23)13940-X
Marrot, L., Candelier, K., Valette, J., Lanvin, C., Horvat, B., Legan, L., & DeVallance, D. B. (2022). Valorization of Hemp Stalk Waste Through Thermochemical Conversion for Energy and Electrical Applications. Waste and Biomass Valorization, 13, 2267-2285. https://doi.org/10.1007/s12649-021-01640-6
Mohanty, P., Nanda, S., Pant, K. K., Naik, S., Kozinski, J. A., & Dalai, A. K. (2013). Evaluation of the physiochemical development of biochars obtained from pyrolysis of wheat straw, timothy grass and pinewood: Effects of heating rate. Journal of Analytical and Applied Pyrolysis, 104, 485-493. https://doi.org/10.1016/j.jaap.2013.05.022
Muigai, H. H., Bordoloi, U., Hussain, R., Ravi, K., Moholkar, V. S., & Kalita, P. (2021). A comparative study on synthesis and characterization of biochars derived from lignocellulosic biomass for their candidacy in agronomy and energy applications. International Journal of Energy Research, 45(3), 4765-4781. https://doi.org/10.1002/er.6092
Naghdi, M., Taheran, M., Brar, S. K., Rouissi, T., Verma, M., Surampalli, R. Y., & Valero, J. R. (2017). A green method for production of nanobiochar by ball milling- optimization and characterization. Journal of Cleaner Production, 164, 1394-1405. https://doi.org/10.1016/j.jclepro.2017.07.084
Nanda, S., Mohanty, P., Pant, K. K., Naik, S., Kozinski, J. A., & Dalai, A. K. (2012). Characterization of North American Lignocellulosic Biomass and Biochars in Terms of their Candidacy for Alternate Renewable Fuels. BioEnergy Research, 6(2), 663-663. https://doi.org/10.1007/s12155-012-9281-4
Nazari, M., Aguilar, M. M., Ghislain, T., & Lavoie, J. M. (2024). Microwave-assisted pyrolysis of biomass waste for production of high-quality biochar: Corn stover and hemp stem case studies. Biomass and Bioenergy, 187, 107302. https://doi.org/10.1016/j.biombioe.2024.107302
Pambudi, S., Saechua, W., & Jongyingcharoen, J. S. (2024). A thermogravimetric assessment of eco-friendly biochar from oxidative torrefaction of spent coffee grounds: Combustion behavior, kinetic parameters, and potential emissions. Environmental Technology & Innovation, 33, 103472. https://doi.org/10.1016/j.eti.2023.103472
Pusceddu, E., Santilli, S. F., Fioravanti, G., Montanaro, A., Miglietta, F., & Foscolo, P. U. (2019). Chemical-physical analysis and exfoliation of biochar-carbon matter: from agriculture soil improver to starting material for advanced nanotechnologies. Materials Research Express, 6(11), 115612. https://doi.org/10.1088/2053-1591/ab4ba8
Rajendran, S., Palani, G., Veerasimman, A., Marimuthu, U., Kannan, K., & Shanmugam, V. (2024). Biochar from cashew nut shells: A sustainable reinforcement for enhanced mechanical performance in hemp fibre composites. Cleaner Engineering and Technology, 20, 100745. https://doi.org/10.1016/j.clet.2024.100745
Salem, K. S., Kasera, N. K., Rahman, M. A., Jameel, H., Habibi, Y., Eichhorn, S. J., French, A. D., Pal, L., & Lucia, L. A. (2023). Comparison and assessment of methods for cellulose crystallinity determination. Chemical Society Reviews, 52(18), 6417-6446. https://doi.org/10.1039/D2CS00569G
Segal, L., Creely, J. J., Martin, A. E., & Conrad, C. M. (1959). An Empirical Method for Estimating the Degree of Crystallinity of Native Cellulose Using the X-Ray Diffractometer. Textile Research Journal, 29(10), 786-794. http://doi.org/10.1177/004051755902901003
Shaaban, A., Se, S. M., Dimin, M. F., Juoi, J. M., Mohd Husin, M. H., & Mitan, N. M. M. (2014). Influence of heating temperature and holding time on biochars derived from rubber wood sawdust via slow pyrolysis. Journal of Analytical and Applied Pyrolysis, 107, 31-39. https://doi.org/10.1016/j.jaap.2014.01.021
Shaaban, A., Se, S. M., Mitan, N. M. M., & Dimin, M. F. (2013). Characterization of Biochar Derived from Rubber Wood Sawdust through Slow Pyrolysis on Surface Porosities and Functional Groups. Procedia Engineering, 68, 365-371. https://doi.org/10.1016/j.proeng.2013.12.193
Song, B., Chen, M., Zhao, L., Qiu, H., & Cao, X. (2019). Physicochemical property and colloidal stability of micron- and nano-particle biochar derived from a variety of feedstock sources. Science of The Total Environment, 661, 685-695. https://doi.org/10.1016/j.scitotenv.2019.01.193
Srinadh, R. V., & Remya, N. (2024). Congo red removal using microwave assisted pyrolysis derived magnetic hemp hurd biochar. Chemical Engineering Research and Design, 212, 321-331. https://doi.org/10.1016/j.cherd.2024.11.011
Stevulova, N., Cigasova, J., Estokova, A., Terpakova, E., Geffert, A., Kacik, F., Singovszka, E., & Holub, M. (2014). Properties characterization of chemically modified hemp hurds. Materials, 7(12), 8131-8150. https://doi.org/10.3390/ma7128131
Struik, P. C., Amaducci, S., Bullard, M. J., Stutterheim, N. C., Venturi, G., & Cromack, H. T. H. (2000). Agronomy of fibre hemp (Cannabis sativa L.) in Europe. Industrial Crops and Products, 11(2-3), 107-118. https://doi.org/10.1016/S0926-6690(99)00048-5
Su, S., Gao, Y., Zhou, X., Xiong, X., Wang, Y., & Lyu, L. (2022). Structure of Waste Hemp Stalks and Their Sound Absorbing Properties. Polymers, 14(22), 4844. https://doi.org/10.3390/polym14224844
Suresh Babu, K. K. B., Nataraj, M., Tayappa, M., Vyas, Y., Mishra, R. K., & Acharya, B. (2024). Production of biochar from waste biomass using slow pyrolysis: Studies of the effect of pyrolysis temperature and holding time on biochar yield and properties. Materials Science for Energy Technologies, 7, 318-334. https://doi.org/10.1016/j.mset.2024.05.002
Tagliaferro, A., Rovere, M., Padovano, E., Bartoli, M., & Giorcelli, M. (2020). Introducing the Novel Mixed Gaussian-Lorentzian Lineshape in the Analysis of the Raman Signal of Biochar. Nanomaterials, 10(9), 1748. https://doi.org/10.3390/nano10091748
Terpáková, E., Kidalová, L., Eštoková, A., Čigášová, J., & Števulová, N. (2012). Chemical Modification of Hemp Shives and their Characterization. Procedia Engineering, 42, 931-941. https://doi.org/10.1016/j.proeng.2012.07.486
Voglar, J., Prašnikar, A., Moser, K., Carlon, E., Schwabl, M., & Likozar, B. (2024). Pyrolysis of industrial hemp biomass from contaminated soil phytoremediation: Kinetics, modelling transport phenomena and biochar-based metal reduction. Thermochimica Acta, 742, 179899. https://doi.org/10.1016/j.tca.2024.179899
Waheed, A., Xu, H., Qiao, X., Aili, A., Yiremaikebayi, Y., Haitao, D., & Muhammad, M. (2025). Biochar in sustainable agriculture and Climate Mitigation: Mechanisms, challenges, and applications in the circular bioeconomy. Biomass and Bioenergy, 193, 107531. https://doi.org/10.1016/j.biombioe.2024.107531
Yang, R., Guo, X., Wu, H., Kang, W., Song, K., Li, Y., Huang, X., & Wang, Ge. (2022). Anisotropic hemp-stem-derived biochar supported phase change materials with efficient solar-thermal energy conversion and storage. Biochar, 4(1), 38. https://doi.org/10.1007/s42773-022-00162-1
Yang, X., Kwon, E. E., Dou, X., Zhang, M., Kim, K. H., Tsang, D. C. W., & Ok, Y. S. (2018). Fabrication of spherical biochar by a two-step thermal process from waste potato peel. Science of The Total Environment, 626, 478-485. https://doi.org/10.1016/j.scitotenv.2018.01.052
Yuan, X., Cao, Y., Li, J., Patel, A. K., Dong, C. D., Jin, X., Gu, C., Yip, A. C. K., Tsang, D. C. W., & Ok, Y. S. (2023). Recent advancements and challenges in emerging applications of biochar-based catalysts. Biotechnology Advances, 67, 108181. https://doi.org/10.1016/j.biotechadv.2023.108181
Zerin, N. H., Rasul, M. G., Jahirul, M. I., Sayem, A. S. M., Quadir, Z., & Haque, R. (2025). XRD Characterization of Activated Carbons Synthesized from Tyre Pyrolysis Char via KOH Activation. Technologies, 13(12), 565. https://doi.org/10.3390/technologies13120565
Zhang, Z., Liu, N., Li, X., Wang, Y., Xiong, Y., Meng, R., Liu,L., & He, S. (2023). Single-step hydrothermal synthesis of biochar from waste industrial hemp stalk core for Pb2+ sorption: Characterization and mechanism studies. Sustainable Chemistry and Pharmacy, 36, 101316. https://doi.org/10.1016/j.scp.2023.101316
Zhao, C., Lv, P., Yang, L., Xing, S., Luo, W., & Wang, Z. (2018). Biodiesel synthesis over biochar-based catalyst from biomass waste pomelo peel. Energy Conversion and Management, 160, 477-485. https://doi.org/10.1016/j.enconman.2018.01.059
Zhou, Z., Xu, Z., Feng, Q., Yao, D., Yu, J., Wang, D., Lv, S., Liu, Y., Zhou, N., & Zhong, M. (2018). Effect of pyrolysis condition on the adsorption mechanism of lead, cadmium and copper on tobacco stem biochar. Journal of Cleaner Production, 187, 996-1005. https://doi.org/10.1016/j.jclepro.2018.03.268

Details

Primary Language

English

Subjects

Industrial Crops

Journal Section

Research Article

Authors

Rıza Paslı
0000-0002-6468-4590
Türkiye

Selim Aytaç ^*
0000-0003-1786-9725
Türkiye

Publication Date

May 31, 2026

Submission Date

May 11, 2026

Acceptance Date

May 21, 2026

Published in Issue

Year 2026 Volume: 1 Number: 1

IZ

https://izlik.org/JA28ML58BU

Cite

RIS / Bibtex

APA

Paslı, R., & Aytaç, S. (2026). Determination of Yield Performance Along with Morphological, Physiological and Quality Characteristics of Some Native Hemp (Cannabis sativa L.) Genotypes. Journal of Hemp Research, 1(1), 13-17. https://izlik.org/JA28ML58BU

AMA

1.Paslı R, Aytaç S. Determination of Yield Performance Along with Morphological, Physiological and Quality Characteristics of Some Native Hemp (Cannabis sativa L.) Genotypes. JoHR. 2026;1(1):13-17. https://izlik.org/JA28ML58BU

Chicago

Paslı, Rıza, and Selim Aytaç. 2026. “Determination of Yield Performance Along With Morphological, Physiological and Quality Characteristics of Some Native Hemp (Cannabis Sativa L.) Genotypes”. Journal of Hemp Research 1 (1): 13-17. https://izlik.org/JA28ML58BU.

EndNote

Paslı R, Aytaç S (May 1, 2026) Determination of Yield Performance Along with Morphological, Physiological and Quality Characteristics of Some Native Hemp (Cannabis sativa L.) Genotypes. Journal of Hemp Research 1 1 13–17.

IEEE

[1]R. Paslı and S. Aytaç, “Determination of Yield Performance Along with Morphological, Physiological and Quality Characteristics of Some Native Hemp (Cannabis sativa L.) Genotypes”, JoHR, vol. 1, no. 1, pp. 13–17, May 2026, [Online]. Available: https://izlik.org/JA28ML58BU

ISNAD

Paslı, Rıza - Aytaç, Selim. “Determination of Yield Performance Along With Morphological, Physiological and Quality Characteristics of Some Native Hemp (Cannabis Sativa L.) Genotypes”. Journal of Hemp Research 1/1 (May 1, 2026): 13-17. https://izlik.org/JA28ML58BU.

JAMA

1.Paslı R, Aytaç S. Determination of Yield Performance Along with Morphological, Physiological and Quality Characteristics of Some Native Hemp (Cannabis sativa L.) Genotypes. JoHR. 2026;1:13–17.

MLA

Paslı, Rıza, and Selim Aytaç. “Determination of Yield Performance Along With Morphological, Physiological and Quality Characteristics of Some Native Hemp (Cannabis Sativa L.) Genotypes”. Journal of Hemp Research, vol. 1, no. 1, May 2026, pp. 13-17, https://izlik.org/JA28ML58BU.

Vancouver

1.Rıza Paslı, Selim Aytaç. Determination of Yield Performance Along with Morphological, Physiological and Quality Characteristics of Some Native Hemp (Cannabis sativa L.) Genotypes. JoHR [Internet]. 2026 May 1;1(1):13-7. Available from: https://izlik.org/JA28ML58BU