Research Article

Response Surface Modeling of Material Removal and Tool Wear Rate in Powder Mixed Electrical Discharge Machining of CoCrMo Alloy

Volume: 4 Number: 2 December 26, 2023
EN TR

Response Surface Modeling of Material Removal and Tool Wear Rate in Powder Mixed Electrical Discharge Machining of CoCrMo Alloy

Abstract

Electric discharge machining (EDM) is commonly used in implant manufacturing due to the challenge of machining materials that are widely employed in these applications. The study applies response surface methodology to model the impact of powder concentration and machining parameters in powder mixed EDM of CoCrMo alloys, a prevalent material for implantation. AISI 316L stainless steel was selected as the electrode material, while Ti6V4Al was chosen as the additive powder based on their biocompatibility properties. An experimental design was created using a Taguchi L16 array, which involved selecting 4 levels for each parameter of additive ratio, discharge current, pulse on time, and pulse off time. Regression models were developed for material removal rate (MRR) add tool wear rate (TWR) with satisfactory coefficients of determinations (0.87). Effect of the process parameters on MRR and TWR were analysed by means of 3D response surface plots. As a result of the modeling, it was revealed that discharge current, puls on time positively affected MRR, powder concentrations and puls off time negatively affected it. On the other hand, all of the considered process parameters have increasing effect on TWR.

Keywords

References

  1. Abbas M.A., Lajis M.A., Abbas D.R., Merzah O.M., Kadhim M.H., Shamran A.A., Influence of additive materials on the roughness of AISI D2 steel in electrical discharge machining (EDM) environment. Materialwissenschaft Und Werkstofftechnik 51(6), 719–724, 2020.
  2. Abdudeen A., Abu Qudeiri J.E., Kareem A., Ahammed T., Ziout A., Recent Advances and Perceptive Insights into Powder-Mixed Dielectric Fluid of EDM. Micromachines 11(8), 754, 2020.
  3. Al-Amin M., Abdul-Rani A.M., Aliyu A.A., Bryant M., Danish M., Ahmad A., Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review. Materials and Manufacturing Processes 35(11), 1157-1180, 2020.
  4. Al-Amin M., Abdul-Rani A.M., Danish M., Rubaiee S., Mahfouz A.bin, Thompson H.M., Ali S., Unune D.R., Sulaiman M.H., Investigation of Coatings, Corrosion and Wear Characteristics of Machined Biomaterials through Hydroxyapatite Mixed-EDM Process: A Review. Materials 14(13), 3597, 2021.
  5. Bahçe E., Aslan A.K., Çakır N., Güler M.S., CoCrMo Alaşımı Üzerine TaN Esaslı İnce Film Kaplamaların Yüzey Özelliklerinin İncelenilmesi. Karadeniz Fen Bilimleri Dergisi 9(2), 223–237, 2019.
  6. Bains P.S., Bahraminasab M., Sidhu S.S., Singh G., On the machinability and properties of Ti–6Al–4V biomaterial with n-HAp powder–mixed ED machining. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 234(2), 232–242, 2020.
  7. Banh L.T., Nguyen P.H., Ngo C., Tool wear rate optimization in PMEDM using titanium powder by Taguchi method for die steels. Science and Technology Development Journal 19(2), 88–97, 2016.
  8. Cakıroglu R., Investigation of The Effects of Processing Parameters on Measuring Accuracy in Electro Erosion Machining of Ti-6Al-4V Alloy. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 10(1), 77–85, 2022.

Details

Primary Language

English

Subjects

Numerical Modelling and Mechanical Characterisation, Manufacturing Processes and Technologies (Excl. Textiles)

Journal Section

Research Article

Early Pub Date

December 25, 2023

Publication Date

December 26, 2023

Submission Date

October 13, 2023

Acceptance Date

December 13, 2023

Published in Issue

Year 2023 Volume: 4 Number: 2

APA
Çavdar, F., Yıldız, C., & Kanca, E. (2023). Response Surface Modeling of Material Removal and Tool Wear Rate in Powder Mixed Electrical Discharge Machining of CoCrMo Alloy. Journal of Materials and Mechatronics: A, 4(2), 571-587. https://doi.org/10.55546/jmm.1375777
AMA
1.Çavdar F, Yıldız C, Kanca E. Response Surface Modeling of Material Removal and Tool Wear Rate in Powder Mixed Electrical Discharge Machining of CoCrMo Alloy. J. Mater. Mechat. A. 2023;4(2):571-587. doi:10.55546/jmm.1375777
Chicago
Çavdar, Faruk, Can Yıldız, and Erdoğan Kanca. 2023. “Response Surface Modeling of Material Removal and Tool Wear Rate in Powder Mixed Electrical Discharge Machining of CoCrMo Alloy”. Journal of Materials and Mechatronics: A 4 (2): 571-87. https://doi.org/10.55546/jmm.1375777.
EndNote
Çavdar F, Yıldız C, Kanca E (December 26, 2023) Response Surface Modeling of Material Removal and Tool Wear Rate in Powder Mixed Electrical Discharge Machining of CoCrMo Alloy. Journal of Materials and Mechatronics: A 4 2 571–587.
IEEE
[1]F. Çavdar, C. Yıldız, and E. Kanca, “Response Surface Modeling of Material Removal and Tool Wear Rate in Powder Mixed Electrical Discharge Machining of CoCrMo Alloy”, J. Mater. Mechat. A, vol. 4, no. 2, pp. 571–587, Dec. 2023, doi: 10.55546/jmm.1375777.
ISNAD
Çavdar, Faruk - Yıldız, Can - Kanca, Erdoğan. “Response Surface Modeling of Material Removal and Tool Wear Rate in Powder Mixed Electrical Discharge Machining of CoCrMo Alloy”. Journal of Materials and Mechatronics: A 4/2 (December 26, 2023): 571-587. https://doi.org/10.55546/jmm.1375777.
JAMA
1.Çavdar F, Yıldız C, Kanca E. Response Surface Modeling of Material Removal and Tool Wear Rate in Powder Mixed Electrical Discharge Machining of CoCrMo Alloy. J. Mater. Mechat. A. 2023;4:571–587.
MLA
Çavdar, Faruk, et al. “Response Surface Modeling of Material Removal and Tool Wear Rate in Powder Mixed Electrical Discharge Machining of CoCrMo Alloy”. Journal of Materials and Mechatronics: A, vol. 4, no. 2, Dec. 2023, pp. 571-87, doi:10.55546/jmm.1375777.
Vancouver
1.Faruk Çavdar, Can Yıldız, Erdoğan Kanca. Response Surface Modeling of Material Removal and Tool Wear Rate in Powder Mixed Electrical Discharge Machining of CoCrMo Alloy. J. Mater. Mechat. A. 2023 Dec. 26;4(2):571-87. doi:10.55546/jmm.1375777

Cited By