Determination of the functional properties of some Nigerian and imported rice varieties

Year 2022, Volume: 11 Issue: 3, 199 - 209, 31.12.2022

Ikoko Omenaogor Ike Oluka Paul Chukwuka Eze

https://doi.org/10.54187/jnrs.1184489

Abstract

This study determined the comparative study of the functional properties of some Nigerian and imported rice varieties. The result showed a significant difference in functional properties at (p>0.05). Illa (Nigerian) rice had the highest Water Absorption Capacity (WAC) (353.76%) and Oil Absorption Capacity (OAC) (218.32%) than the imported rice variety. The bulk density of both samples had less significantly different values. The percentage values of dispersibility (75.00%) were higher in Ofada (Nigerian) rice. Nigerian rice had a higher swelling index (10.91%). The amylopectin contents of tested rice varieties were 76.26, 76.55, 75.58, 74.37, and 77.55% for Illa, Abakaliki, Jemila, Ofada, and Imported rice, respectively. The result revealed that Imported rice had the highest value (77.55%) of amylopectin, followed by Abakaliki rice which recorded 76.55%, and Illa rice variety from the Southern region had 76.28%. In comparison, the Ofada rice sample had the lowest value (74.37%) of amylopectin content, followed by Jemila rice which recorded 75.58% of amylopectin content. The amylose content for Illa, Abakaliki, Jemila, Ofada, and Imported rice varieties was 23.73, 23.45, 24.42, 25.64, and 22.45%, respectively. Rice flour, with low amylose content, gives moistness, chewiness, and softness to the textures of the product. It showed that Ofada rice had the highest value (25.64%) of amylose content, followed by Jemila rice which recorded 24.42% of amylose content. The lowest value (22.45%) was found in imported rice, followed by Abakaliki rice with 23.45% and Illa rice sample with 23.73% of amylose content. It can be concluded that Nigerian rice is compared handsomely with imported rice in terms of functional properties, which determines the end-use and general acceptability of flour samples.

Keywords

Rice flour, Varieties, Functional properties, Nigerian rice

References

• H. Twinomuhwezi, C. G. Awuchi, M. Rachael, Comparative study of the proximate composition and functional properties of composite flours of amaranth, rice, millet, and soybean, American Journal of Food Science and Nutrition, 6(1), (2020) 6-19.
• O. Oluwole, T. Akinwale, T. Adesioye, O. Odediran, J. Anuoluwatelemi, O. Ibidapo, F. Owolabi, S. Owolabi, S. Kosoko, Some of the functional properties of flours from the commonly consumed selected Nigerian food crops, International Research Journal of Agricultural and Food Sciences, 1(5), (2016) 92-98.
• M. O. Iwe, U. Onyeukwu, A. N. Agiriga, F. Yildiz, Proximate, functional and pasting properties of FARO 44 rice, African yam bean and brown cowpea seeds composite flour, Cogent Food & Agriculture, 2(1), (2016) 1-10.
• C. G. Awuchi, V. S. Igwe, C. K. Echeta, The functional properties of foods and flours, International Journal of Advanced Academic Research, 5(11), (2019) 139-160.
• S. Chandra, S. Samsher, Assessment of functional properties of different flours, African Journal of Agricultural Research, 8(38), (2013) 4849-4852.
• M. Kaur, N. Singh, Relationships between the selected properties of seeds, flours, and starches from different chickpea cultivars, International Journal of Food Properties, 9(4), (2006) 597-608.
• M. Siddiq, M. Nasir, R. Ravi, K. D. Dolan, S. M. Butt, The effect of defatted maize germ addition on the functional and textural properties of wheat flour, International Journal of Food Properties, 12(4), (2009), 860-870.
• J. C. Anuonye, C. E. Chinma, J. Olukayode, A. Suleiman, Nutrient composition, amylose content and pasting characteristics of some elite accessions of NERICA rice, Journal of Food Technology Research, 3(1), (2016) 36-47.
• A. Pokhrel, A. Dhakal, S. Sharma, A. Poudel, Evaluation of physicochemical and cooking characteristics of rice (Oryza sativa L.) landraces of Lamjung and Tanahun districts, Nepal, International Journal of Food Science, 2020, Article ID: 1589150, 1-11.
• N. Singh, L. Kaur, N. S. Sodhi, K. S. Sekhon, Physicochemical, cooking and textural properties of milled rice from different Indian rice cultivars, Food Chemistry, 89(2), (2005) 253–259.
• A. O. Oko, B. E. Ubi, N. Dambaba, Rice cooking quality and physic-chemical characteristics: A comparative analysis of selected local and newly introduced rice varieties in Ebonyi state, Nigeria, Food and Public Health, 2(1), (2012) 43–49.
• R. Thomas, W. N.. Wan Abdullah, R. Bhat, Physiochemical properties, proximate composition, and cooking qualities of locally grown and imported rice varieties marketed in Penang, Malaysia, International Food Research Journal, 20(3), (2013) 1345–1351.
• F. M. Bhat, C. S. Riar, Physicochemical, cooking, and textural characteristics of grains of different rice (Oryza sativa L.) cultivars of temperate region of India and their interrelationships, Journal of Texture Studies, 48(2), (2017) 160–170.
• S. Sharma, A. Pokhrel, A. Dhakal, A. Poudel, Agro-morphological characterisation of rice (Oryza Sativa l.) landraces of Lamjung and Tanahun district, Nepal, Annals of Plant Sciences, 9(2), (2020) 3731–3741.
• O. O. Adekoyeni, S. A. Fagbemi, A. R. Ismaila, Ofada rice identity, physical qualities and processing technology options for upgrading: A review, Annual Research & Review in Biology, 23(2), (2018) 1-9.
• A. M. Abbas, I. G. Agada, O. Kolade, Impacts of rice importation on Nigeria’s economy, Journal of Scientific Agriculture, 2, (2018) 71-75.
• FMARD, The Agriculture Promotion Policy (2016-2020), Federal Ministry of Agriculture and Rural Development, Abuja FCT, Nigeria, 2016.
• C. Diako, E. Sakyi-Dawson, B. Bediako-Amoa, F. K. Saalia, J. T. Manful, Consumer perceptions, knowledge and preferences for aromatic rice types in Ghana, Nature and Science, 8(12), (2010) 12-19.
• F. Apori-Buabeng, Market organisation and consumers’ perception of locally produced rice in the Ashanti region of Ghana, Master’s Thesis, Kwame Nkrumah University of Science & Technology (2009) Kumasi, Ghana.
• F. D. Wireko-Manu, C. Amamoo, Comparative studies on proximate and some mineral composition of selected local rice varieties and imported rice brands in Ghana, Agriculture and Food Sciences Research, 4(1), (2017) 1-7.
• G. I. Onwuka, Food analysis and instrumentation theory and practice, Naphtali Prints, Lagos, 2005.
• P. E. Ide, P. C. Eze, C. N. Eze, Comparative studies on the proximate composition and functional properties of mucuna Sloane bean flour varieties, Journal of Asian Scientific Research, 9(11), (2019) 185-192.
• U. J. Ukpabi, C. Ndimele, Evaluation of the quality of gari produced in Imo State, Nigeria, Nigeria Food Journal, 8, (1990) 105 – 110.
• B. A. Udensi, J. O. Onuora, Chemical and functional properties of soybean flours in the Nigerian market, Book of Abstract, 16th Annual Conf. NIFST, Enugu, (1992) 26 – 30.
• E. R. Ohizua, A. A. Adeola, M. A. Idowu, O. P. Sobukola, T. A. Afolabi, R. O. Ishola, S. O. Ayansina, T. O. Oyekale, A. Falomo, Nutrient composition, functional and pasting properties of unripe cooking banana, pigeon pea and sweetpotato flour blends, Food Science & Nutrition, 5(3), (2017) 750-762.
• K. K. Singh, T. K. Goswami, Thermal properties of cumin seeds, Journal of Food Engineering, 45(4) (2000) 181- 187.
• M. A. Ajatta, S. A. Akinola, O. F. Osundahunsi, Proximate, functional and pasting properties of composite flours made from wheat, breadfruit and cassava starch, Applied Tropical Agriculture, 21(3), (2016) 158-165.
• A. Mahajan, S. Dua, Salts and pH-induced changes in functional properties of amaranth (Amaranthus tricolor l.) seed meal, Cereal Chemistry, 79(6), (2002) 834–837.
• R. Thomas, R. Bhat, Y. T. Kuang, W. N. Wan Abdullah, Functional and pasting properties of locally grown and imported exotic rice varieties of Malaysia, Food Science and Technology Research, 20(2), (2014) 469-477.
• R. Bhat, K. R. Sridhar, C. C. Young, A. A. Bhagwath, S. Ganesh, Composition and functional properties of raw and electron beam irradiated Mucuna pruriens seeds, International Journal of Food Science and Technology, 43, (2008) 1338-1351.
• M. Kaur, N. Singh, Studies on functional, thermal, and pasting properties of flours from different chickpea (Cicer arietinum L.) cultivars, Food Chemistry, 91(3), (2005) 403-411.
• P. Williams, Y. Pan, V. Poulson, New Applications for Rice Flour, Rice CRC Final Research Report, 2005.
• N. E. Ihegwuagu, M. O. Omojola, M. O. Emeje, O. O. Kunle, Isolation and evaluation of some physicochemical properties of Parkia biglobosa starch, Pure and Applied Chemistry, 81(1), (2009) 97-104.
• S. B. Fasoyiro, S. R. Akande, K. A. Arowora, O. O. Sodeko, P. O. Sulaiman, C. O. Olapade, C. E. Odiri, Physico-chemical and sensory properties of pigeon pea (Cajanus cajan) flours, African Journal of Food Science, 4(3), (2010) 120-126.
• O. S. Lawal, K. O. Adebowale, B. M. Ogunsanwo, L. L. Barba, N. S. Ilo, Oxidized and acid thinned starch derivatives of hybrid maize: functional characteristics, wide–angle X-ray diffractometry and thermal properties, International Journal of Biological Macromolecules, 35(1-2), (2005) 71-79.
• O. Malomo, O. A. B. Ogunmoyela, O. O. Adekoyeni, O. Jimoh, S. O. Oluwajoba, M. O. Sobanwa, Rheological and functional properties of soy – poundo yam flour, International Journal of Food Science and Nutrition Engineering, 2(6), (2012) 101-107.
• O. O. Aluge, S. A. Akinola, O. F. Osundahunsi, Effect of malted sorghum on quality characteristics of wheat-sorghum-soybean flour for potential use in confectionaries, Food and Nutrition Sciences, 7(13), (2016) 1241-1252.
• J. Eke-Ejiofor, L. Nwiganale, The effect of variety and processing methods on the functional and chemical properties of rice flour, International Journal of Nutrition and Food Sciences, 5(1), (2016) 80-84.
• A. A. Adebowale, M. T. Adegoke, S. A. Sanni, M. O. Adegunwa, G. O. Fetuga, Functional properties and biscuit making potentials of sorghum – wheat flour composite, American Journal of Food Technology, 7(6), (2012) 372-379.
• A. A. Adebowale, L. O. Sanni, M. O. Onitilo, Chemical composition and pasting properties of Tapioca grits from different cassava varieties and roasting methods, African Journal of Food Science, 2, (2008) 77-82.
• J. Eke-Ejiofor, F. Owuno, Functional and pasting properties of wheat/three-leaved yam (Dioscoreadumetorum) composite flour blend, Global Research Journal of Agricultural and Biological Science, 3(4), (2012) 330-335.
• K. O. Falade, A. S. Christopher, Physical, functional, pasting and thermal properties of flours and starches of six Nigerian rice cultivars, Food Hydrocolloids, 44, (2015) 478–490.
• S. Susiyanti, R. Rusmana, Y. Maryani, S. Sjaifuddin, N. Krisdianto, M. A. Syabana, The physicochemical properties of several Indonesian rice varieties, Biotropia, 27(1), (2020) 41 – 50.
• A. Masniawati, N. A. M. Asrul, E. Johannes, M. Asnady, Characterization of rice physicochemical properties local rice germplasm from Tana Toraja regency of South Sulawesi, in: D. Tahir (Eds.), Journal of Physics: Conference Series, The 2nd International Conference on Science (ICOS), Makassar, Indonesia, 2017, Volume 979, Article ID: 12005.
• I. Buresova, I. Sedlackova, O. Famera, J. Lipavsky, Effect of growing conditions on starch and protein content in triticale grain and amylose content in starch, Plant Soil Environs, 56(3), (2010) 99–104.
• J. Eke-Ejiofor, D. B. Kiin-Kabari, Chemical, pasting, functional and sensory properties of Sweet and Irish potato chips, Nigerian Food Journal, 28(2), (2010) 47-54.