Microstructure, Thermal and Mechanical Properties of Novel Nanocrystalline Al-B-Si Alloy

Year 2025, Volume: 14 Issue: 2, 189 - 200, 31.08.2025

Celal Kurşun

https://doi.org/10.54187/jnrs.1707677

Abstract

In this study, a nanostructured Al50B45Si5 alloy was produced by the mechanical alloying technique from mixtures of high-purity Al, B, and Si powders. The thermal behavior, structural evolution, and mechanical properties of the powders were examined through X-ray diffraction (XRD), scanning electron microscopy-energy dispersive X-ray (SEM-EDX), differential scanning calorimetry (DSC), differential thermal analysis (DTA), transmission electron microscopy (TEM), and Vickers microhardness measurements. The XRD results revealed that all crystalline peaks belonging to the Al, B, and Si elements disappeared during mechanical alloying and were eventually replaced by peaks from intermetallic phases such as AlB2, B4Si, and AlB12 in the supersaturated Al(Si) matrix. The crystalline size of the Al50B45Si5 alloy was calculated by the Debye Scherrer equation, and it was determined to be 9.5 nm, consistent with TEM measurements. The microhardness value of the alloy was 219±10 HV, while the hardness increased to 345±9 HV with heat treatment. Therefore, a nanostructured Al50B45Si5 alloy with high hardness, good thermal stability, and homogeneity was favorably synthesized by mechanical alloying for use in industrial applications.

Keywords

Al alloys , nanocrystalline , microhardness , mechanical alloying , TEM

Supporting Institution

Kahramanmaras Sutcu Imam University

Thanks

I greatly appreciate the financial support from Kahramanmaras Sutcu Imam University. I would like to thank F. S. Uludag for assistance to draw Fig. 3 and 4.

References

• T. Xu, D. Zuo, G. Zhang, Modeling of anisotropic fracture forming limit strain for high-strength aluminum alloys in sheet metal forming, Materials Today Communications 47 (2025) 113012.
• J. Min, F. Xie, Y. Liu, Z. Hou, J. Lu, J. Lin, Experimental study on cold forming process of 7075 aluminum alloy in W temper, CIRP Journal of Manufacturing Science and Technology 37 (2022) 11–18.
• L. Pezzato, M. Dabala, K. Brunelli, Microstructure and corrosion properties of PEO coatings produced on AM-aluminum alloys, Key Engineering Materials 813 (2019) 298–303.
• A. Mahabubadsha, K. Anandavelu, Exploring the impact of AGG on the strength of AA2014 aluminium alloy FSW joints, Emerging Materials Research 14 (2) (2025) 190–197.
• Zulfadhli, A. Akhyar, N. Ali, Arhami, M. R. Pahlevi, Variations in casting temperatures effect of re-melted 6061 aluminum alloy on tensile strength, Results in Materials 26 (2025) 100691.
• Y. Sun, In-fire material properties of wire-arc additively manufactured 3D-printed structural aluminum alloys, Construction and Building Materials 474 (2025) 140946.
• A. D. Iams, J.S. Wweaver, B.M. Lane, L.A. Giannuzzi, F. Yi, D.L. LaPlant, J.H. Martin, F. Zhang, Microstructural features and metastable phase formation in a high-strength aluminum alloy fabricated using additive manufacturing, Journal of Alloys and Compounds 1025 (2025) 180281.
• S. Çağlar, Impact of B4C reinforcement on the microstructure, wear, hardness, corrosion behavior, and radiation shielding properties of Al-40Sm2O3 hybrid composites, Nuclear Engineering and Technology 57 (8) (2025) 103566.
• C. Kursun, M. Gogebakan, Characterization of nanostructured Mg–Cu–Ni powders prepared by mechanical alloying, Journal of Alloys and Compounds 619 (2015) 138–144.
• Y. K. Yadav, M. A. Shaz, N. K. Mukhopadhyay, T. P. Yadav, High entropy alloys synthesized by mechanical alloying: A review, Journal of Alloys and Metallurgical Systems 9 (2025) 100170.
• J.G. Jung, S.-H. Lee, J.-M. Lee, Y.-H. Cho, S.-H. Kim, W.H. Yoon, Improved mechanical properties of near-eutectic Al-Si piston alloy through ultrasonic melt treatment, Materials Science and Engineering: A 669 (2016) 187–195.
• F. Czerwinski, Thermal stability of aluminum–cerium binary alloys containing the Al–Al11Ce3 eutectic, Materials Science & Engineering A 809 (2021) 140973.
• Z. Chen, H. Kang, G. Fan, J. Li, Y. Lu, J. Jie, Y. Zhang, T. Li, X. Jian, T. Wang, Grain refinement of hypoeutectic Al-Si alloys with B, Acta Materialia 120 (2016) 168–178.
• Y. Birol, A novel Al–Ti–B alloy for grain refining Al–Si foundry alloys, Journal of Alloys and Compounds 486 (1-2) (2009) 219–222.
• V. Vilamosa, A.H. Clausen, T. Børvik, S.R. Skjervold, O.S. Hopperstad, Behaviour of Al-Mg-Si alloys at a wide range of temperatures and strain rates, International Journal of Impact Engineering 86 (2015) 223–239.
• M. Cheminguia, M. Khitouni, G. Mesmacque, A.W. Kolsi, Effect of heat treatment on plasticity of Al-Zn-Mg alloy: Microstructure evolution and mechanical properties, Physics Procedia 2 (3) (2009) 1167–1174.
• K.B. Gerasimov, V.V. Boldyrev, On mechanism of new phases formation during mechanical alloying of Ag-Cu, Al-Ge and Fe-Sn systems, Materials Research Bulletin 31 (10) (1996) 1297–1305.
• J. Wang, Mechanical alloying of amorphous Al–SiO2 powders, Journal of Alloys and Compounds 456 (1-2) (2008) 139–142.
• Y.C. Kim, J.C. Lee, P.R. Cha, J.P. Ahn, E. Fleury, Enhance glass forming ability and mechanical properties of new Cu-based bulk metallic glasses, Materials Science and Engineering: A 437 (2) (2006) 248–253.
• N. Badar, H. M. Yusoff, K. Elong, N. Kamarulzaman, Crystallite size reduction of Cr doped Al2O3 materials via optimized high-energy ball milling method, Advanced Powder Technology 34 (8) (2023) 104102.
• C. Kursun, M. Gogebakan and H. Eskalen, Mechanical properties, microstructural and thermal evolution of Mg65Ni20Y15−xSix (X=1,2,3) alloys by mechanical alloying, Materials Research Express 5 (3) (2018) 036512.
• C. Kursun, M. Gogebakan, E. Uludag, M. S. Bozgeyik and F. S. Uludag, Structural, electrical and magnetic properties of Nd – A – CoO3 (A = Sr, Ca) Perovskite Powders by Mechanical Alloying, Scientific Reports 8 (1) (2018) 13083.
• E. J. Felten, The preparation of aluminum diboride, AlB21, Journal of the American Chemical Society 78 (23) (1956) 5977–5978.
• J. Fjellstedt, and A.E.W. Jarfors, Experimental and theoretical study of the Al-rich corner in the ternary Al-Ti-B system and reassessment of the Al-rich side of the binary Al-B phase diagram, International Journal of Materials Research 92 (6) (2001) 563–571.
• O.N. Carlson, The Al-B (Aluminum-Boron) system, Bulletin of Alloy Phase Diagrams 11 (1990) 560– 566.
• C. Kursun, M. Gogebakan, Structure and mechanical behaviour of Cu-Zr-Ni-Al amorphous alloys produced by rapid solidification, in: B. Movahedi (Ed.), Metallic Glasses - Formation and Properties, InTechOpen, London, 2016, Ch. 5, pp. 97–108.
• X. Zeng, W. Liu, B. Xu, G. Shu, Q. Li, Microstructure and Mechanical Properties of Al–SiC Nanocomposites Synthesized by Surface-Modified Aluminium Powder, Metals 8 (4) (2018) 253.
• Y.F. Wang, H. Hou, Y.H. Zhao, J.Z. Tian, Microstructure and mechanical properties of an Al-Si alloy reinforced by Al64Cu24Fe12 quasi-crystalline particles, Materialwissenschaft und Werkstofftechnik 49 (2) (2018) 225–234.
• M. S. Salleh, M. Z. Omar, Influence of Cu content on microstructure and mechanical properties of thixoformed Al−Si−Cu−Mg alloys, Transactions of Nonferrous Metals Society of China 25 (2015) 3523−3538.
• M. Chemingui, M. Khitouni, G. Mesmacque, A.W. Kolsi, Effect of heat treatment on plasticity of Al-Zn-Mg alloy: Microstructure evolution and mechanical properties, Physics Procedia 2 (3) (2009) 1167–1174.
• N. Takata, T. Okano, A. Suzuki, M. Kobashi, Microstructure of intermetallic-reinforced Al-Based alloy composites fabricated using eutectic reactions in Al–Mg–Zn ternary system, Intermetallics 95 (2018) 48–58.