Multi-Walled Carbon Nanotube Reinforced Polyimide Composites

Abstract

Polyimides have a wide range of uses such as aerospace industry fuel cell applications, optic and electronic materials industry due to their outstanding thermal, mechanical and chemical properties. In this study, it was aimed to prepare composite polyimide films with amine tethered multi-walled-carbon nanotube (MWCNT). Firstly, to produce amine functional groups onto the surface of MWNCTs, MWCNTs were reacted with H₂SO₄/HNO₃, thionyl chloride and ethylenediamine, respectively. Then polyamicacid solution was prepared from BTDA and ODA. The functionalized carbon nanotube was added to the PAA solutions with a certain amounts (1%, 3%, 4%, 5% and 6%wt.) and followed by stepwise thermal imidization. The thermal stability of the composite polyimide films were enhanced with addition of modified-carbon nanotube since covalent interaction between polyimide based matrix and modified-carbon nanotube happened by imidization reaction. In addition, the mechanical properties of the films were improved. 

Keywords

• Key words: Polyimide,carbon nanotube

References

1. Yang F, Li Y, Zhang S, Tao M, Zhao J, Hang C. Functionalization of multiwalled carbon nanotubes and related polyimide/carbon nanotubes composites. Synthetic Metals 2010; (160), 15–16,: 1805-1808.
2. Olalde B, Aizpurua JM, García A, Bustero I, Obieta I, Jurado MJ. Single-Walled Carbon Nanotubes and Multiwalled Carbon Nanotubes Functionalized with Poly(l-lactic acid): a Comparative Study J. Phys. Chem. C. 2008; 112 (29:) 10663–10667.
3. Meng L, Fu C , Lu Q. Advanced technology for functionalization of carbon nanotubes Progress in Natural Science. 2009; (19), 7- 10: 801-810.4. J Nanomater, 83583 (2006), pp. 1-5.
4. Z.M. Dang, L. Wang, L.P. Zhang Surface functionalization of multiwalled carbon nanotube with trifluorophenyl. J Nanomater. 2006; (83583): 1-5.
5. Oktay B, Toker RD, Kayaman-Apohan N. Superhydrophobic behavior of polyimide–siloxane mats produced by electrospinning. Polymer Bulletin. 2015: ( 72) , 11; 2831–2842.
6. Wang J, Jiao Q, Li H, Zhao Y, Guo B. In Situ Preparation of Polyimide/Amino-Functionalized Carbon Nanotube Composites and Their B Properties. POLYMER COMPOSITES—2014
7. Park C, Ounaies Z, Watson KA, Crooks RE, Smith JE, Lowther SE. Dispersion of single wall carbon nanotubes by in situ polymerization under sonication. Chem. Phys. Lett. 2002;(364):303–8.
8. Zhu BK, Xie SH, Xu ZK, Xu YY. Preparation and properties of the polyimide/multi-walled carbon nanotubes (MWNTs). Compos Sci Technol 2006;(66):548–554.

9. So HH, Cho Sahoo NG. Effect of carbon nanotubes on mechanical and electrical properties of polyimide/carbon nanotubes nanocomposites. Macromolecular Nanotechnology. European Polymer Journal. 2007; (43): 3750–3756.
10. Vatanpour V, Safarpour M, Khataee A, Zarrabi H, Ehsan M, Kavian YM. A thin film nanocomposite reverse osmosis membrane containing amine-functionalized carbon nanotubes. Separation and Purification Technology. 2017: (184), 31; 135–143
11. Çakmakçı E, Güngör A. Preparation and characterization of flame retardant and proton conducting boron phosphate/polyimide composites. Polymer Degradation and Stability. 2013; (98), 5: 927-933.
12. Atieh MA, Bakather OY, Al-Tawbini B, Bukhari AA, Abuilaiwi FA, Fettouhi MB. Effect of Carboxylic Functional Group Functionalized on Carbon Nanotubes Surface on the Removal of Lead from Water. Bioinorg Chem Appl. 2011:(2010); 2010: 603978.
13. So HH, Cho JW, Sahoo NG. Effect of carbon nanotubes on mechanical and electrical properties of polyimide/carbon nanotubes nanocomposites. European Polymer Journal. 2007: (43), 9:750–3756.
14. Wang J, Pui DYH. Dispersion and Filtration of Carbon Nanotubes (CNTs) and Measurement of Nanoparticle Agglomerates in Diesel Exhaust. Chem Eng Sci. 2013: (85); 69–76.
15. Kim BS, Bae SH, Park YH, Kim JH. Preparation and Characterization of Polyimide/Carbon-Nanotube Composites. Macromolecular Research, 2007 (15),4: 357-362.
16. Ha CS., Mathews A.S. (2011) Polyimides and High Performance Organic Polymers. In: Advanced Functional Materials. Springer, Berlin, Heidelberg.
17. Ribeiro CR, Freeman BD, Kalika DS, Kalakkunnath S. Pervaporative Separation of Aromatic/Aliphatic Mixtures with Poly(Siloxane-co-Imide) and Poly(Ether-co-Imide) Membranes. Ind Eng Chem Res 2013; (52): 8906−8916.
18. Mahajan A, Ákos AK, Zoltan K, Vilarinho PM. Studies on the thermal decomposition of multiwall carbon nanotubes under different atmospheres. Materials Letters. 2013; (90),1:165-168.
19. Mo TC, Wang HW, Chen SY, Yeh YC. Synthesis and Characterization of Polyimide/ Multi-Walled Carbon Nanotube nanocomposites. Polymer Composites. 2008; (29), 4: 451-457.