Research Article

Fabrication of Superhydrophobic Coatings on Glass based on Poly(dimethylsiloxane) and Fumed Silica

Volume: 7 Number: 2 June 23, 2020
  • Esra Kasapgil
  • Alper Nerat
  • Buse M. Poyraz
  • Ilke Anac *
EN

Fabrication of Superhydrophobic Coatings on Glass based on Poly(dimethylsiloxane) and Fumed Silica

Abstract

This study reports the preparation of superhydrophobic covalently attached poly(dimethysiloxane)(PDMS)/fumed silica composite coatings on glass via spin-coating and subsequent heating. The effect of PDMS molecular weight and fumed silica type (hydrophilic and three different hydrophobic) on the wettability and morphology were studied in detail and the wettability and morphology of the coatings were characterized by contact angle measurements and scanning electron microscopy (SEM). Superhydrophobic coatings which have advancing contact angles of 172-174° and contact angle hysteresis (CAH) as low as 7-8° were obtained using 4% (w/v) PDMS modified hydrophobic fumed silica and all kinds of PDMS. The surfaces which were prepared by 4% (w/v) hydrophilic and dimethylsiloxy modified fumed silica had high advancing contact angles of 163-168° but the CAH on these surfaces were higher than the ones prepared using PDMS modified fumed silica. This can be ascribed to the incompatibility of the hydrophilic and dimethylsiloxy modified fumed silica with the PDMS matrix which was also confirmed with the SEM results.

Keywords

Supporting Institution

Gebze Technical University

Project Number

GTU 2016-A17

Thanks

This research originates from Alper Nerat’s MS Thesis (#523031). We thank Mr. Ahmet Nazım in the Materials Science and Engineering Department of Gebze Technical University for taking the SEM images.

References

  1. 1. Barthlott W, Neinhuis C. Purity of the sacred lotus, or escape from contamination in biological surfaces. Planta 1997; 202 (1): 1-8.
  2. 2. Chen W, Fadeev AY, Hsieh MC, Oner D, Yougblood J et al. Ultrahydrophobic and ultralyophobic surfaces: some comments and examples. Langmuir 1999; 15 (10): 3395-3399.
  3. 3. Erbil HY, Demirel AL, Avci Y, Mert O. Transformation of a simple plastic into a superhydrophobic surface. Science 2003; 299 (5611): 1377-1380.
  4. 4. Yan YY, Gao N, Barthlott W. Mimicking natural superhydrophobic surfaces and grasping the wetting process: a review on recent progress in preparing superhydrophobic surfaces, Advances in Colloid and Interface Science 2011; 169 (2): 80-105.
  5. 5. Roach P, Shirtcliffe NJ, Newton MI. Progress in superhyrophobic surface development. Soft Matter 2008; 4 (2); 224-240.
  6. 6. Feng L, Li SH, Li YS, Li HJ, Zhang LJ et al. Super-hydrophobic surfaces: from natural to artificial. Advance Materials 2002; 14 (24): 1857-1860.
  7. 7. Liu K, Tian Y, Jiang L. Bio-inspired superoleophobic and smart materials: design, fabrication, and application. Progress in Materials Science 2013; 58 (4): 503-564.
  8. 8. Cassie ABD, Baxter S. Wettability of porous surfaces. Transactions of the Faraday Society 1944; 40: 546-551.

Details

Primary Language

English

Subjects

Polymer Science and Technologies

Journal Section

Research Article

Publication Date

June 23, 2020

Submission Date

February 21, 2020

Acceptance Date

June 7, 2020

Published in Issue

Year 2020 Volume: 7 Number: 2

APA
Kasapgil, E., Nerat, A., Poyraz, B. M., & Anac, I. (2020). Fabrication of Superhydrophobic Coatings on Glass based on Poly(dimethylsiloxane) and Fumed Silica. Journal of the Turkish Chemical Society Section A: Chemistry, 7(2), 589-596. https://doi.org/10.18596/jotcsa.692565
AMA
1.Kasapgil E, Nerat A, Poyraz BM, Anac I. Fabrication of Superhydrophobic Coatings on Glass based on Poly(dimethylsiloxane) and Fumed Silica. JOTCSA. 2020;7(2):589-596. doi:10.18596/jotcsa.692565
Chicago
Kasapgil, Esra, Alper Nerat, Buse M. Poyraz, and Ilke Anac. 2020. “Fabrication of Superhydrophobic Coatings on Glass Based on Poly(dimethylsiloxane) and Fumed Silica”. Journal of the Turkish Chemical Society Section A: Chemistry 7 (2): 589-96. https://doi.org/10.18596/jotcsa.692565.
EndNote
Kasapgil E, Nerat A, Poyraz BM, Anac I (June 1, 2020) Fabrication of Superhydrophobic Coatings on Glass based on Poly(dimethylsiloxane) and Fumed Silica. Journal of the Turkish Chemical Society Section A: Chemistry 7 2 589–596.
IEEE
[1]E. Kasapgil, A. Nerat, B. M. Poyraz, and I. Anac, “Fabrication of Superhydrophobic Coatings on Glass based on Poly(dimethylsiloxane) and Fumed Silica”, JOTCSA, vol. 7, no. 2, pp. 589–596, June 2020, doi: 10.18596/jotcsa.692565.
ISNAD
Kasapgil, Esra - Nerat, Alper - Poyraz, Buse M. - Anac, Ilke. “Fabrication of Superhydrophobic Coatings on Glass Based on Poly(dimethylsiloxane) and Fumed Silica”. Journal of the Turkish Chemical Society Section A: Chemistry 7/2 (June 1, 2020): 589-596. https://doi.org/10.18596/jotcsa.692565.
JAMA
1.Kasapgil E, Nerat A, Poyraz BM, Anac I. Fabrication of Superhydrophobic Coatings on Glass based on Poly(dimethylsiloxane) and Fumed Silica. JOTCSA. 2020;7:589–596.
MLA
Kasapgil, Esra, et al. “Fabrication of Superhydrophobic Coatings on Glass Based on Poly(dimethylsiloxane) and Fumed Silica”. Journal of the Turkish Chemical Society Section A: Chemistry, vol. 7, no. 2, June 2020, pp. 589-96, doi:10.18596/jotcsa.692565.
Vancouver
1.Esra Kasapgil, Alper Nerat, Buse M. Poyraz, Ilke Anac. Fabrication of Superhydrophobic Coatings on Glass based on Poly(dimethylsiloxane) and Fumed Silica. JOTCSA. 2020 Jun. 1;7(2):589-96. doi:10.18596/jotcsa.692565

Cited By