Challanges of Using Nanofluids in Two-Phase Heat Transfer Applications

Muhammet Camcı

doi:10.58692/jotcsb.1770014

Challanges of Using Nanofluids in Two-Phase Heat Transfer Applications

Abstract

This study aims to reveal difficulties faced while nanofluids are used in two-phase heat transfer applications such as boiling and condensation. The discussion is supported by both a review of literature and experimental observations conducted by the author. Nanofluid research related to boiling/condensation makes up 29.3% of the total boiling/condensation studies conducted over the years. It indicates that nanofluids remain a prominent area of inquiry in two-phase research. Numerous studies have explored the beneficial effects of nanofluids on heat transfer performance. Despite the fact that many academic papers show outcomes of using nanofluids in thermal applications, nanofluids’ translation to industrial applications remains limited. In this experimental work, key obstacles include nanoparticle deposition on heated surfaces; instability has been observed and depicted. Besides this experimental study, outcomes from many experimental studies, including flow boiling, have been evaluated. After this evaluation, agglomeration under thermal cycling, increased viscosity leading to higher pumping power requirements, and erosion or corrosion of system components, especially in microchannel configurations, have been summarized as disadvantages of nanofluids. Furthermore, experimental results are often inconsistent, owing to variations in nanoparticle type, fluid composition, and test conditions. Apart from heat transfer rate and viscosity, which are the most important outcomes for heat transfer applications, the thermal process sector has bigger concerns, such as sustainability in both the application and environment.

Keywords

Supporting Institution

The author received no specific funding and had no acknowledgements to declare.

Ethical Statement

The author declares that the work presented in this manuscript is original and has been conducted in accordance with the ethical standards of research and publication. No part of the manuscript has been published or is under consideration elsewhere. The study does not involve human participants or animals, and therefore no ethical approval was required. All sources have been properly cited, and the author affirms that there are no conflicts of interest related to the publication of this work.

References

Altun, A. H., Nacak, H., & Canli, E. (2022). Effects of trapezoidal and twisted trapezoidal tapes on turbulent heat transfer in tubes. Applied Thermal Engineering, 211, 118386. https://doi.org/10.1016/j.applthermaleng.2022.118386
Babita, Sharma, S. K., & Gupta, S. M. (2016). Preparation and evaluation of stable nanofluids for heat transfer application: A review. Experimental Thermal and Fluid Science, 79, 202–212. https://doi.org/10.1016/j.expthermflusci.2016.06.029
Banisharif, A., Estellé, P., Rashidi, A., Van Vaerenbergh, S., & Aghajani, M. (2021). Heat transfer properties of metal, metal oxides, and carbon water-based nanofluids in the ethanol condensation process. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 622, 126720. https://doi.org/10.1016/j.colsurfa.2021.126720
Celata, G. P., D’Annibale, F., Mariani, A., Sau, S., Serra, E., Bubbico, R., Menale, C., & Poth, H. (2014). Experimental results of nanofluids flow effects on metal surfaces. Chemical Engineering Research and Design, 92(9), 1616–1628. https://doi.org/10.1016/j.cherd.2013.12.003
Diao, Y. H., Li, C. Z., Zhao, Y. H., Liu, Y., & Wang, S. (2015). Experimental investigation on the pool boiling characteristics and critical heat flux of Cu-R141b nanorefrigerant under atmospheric pressure. International Journal of Heat and Mass Transfer, 89, 110–115. https://doi.org/10.1016/j.ijheatmasstransfer.2015.05.043
Eneren, P., Aksoy, Y. T., & Vetrano, M. R. (2023). Practical Challenges in Nanofluid Convective Heat Transfer Inside Silicon Microchannels. Energies, 16(23), 7885. https://doi.org/10.3390/en16237885
Khliyeva, O., Zhelezny, V., Lukianova, T., Lukianov, N., Semenyuk, Yu., Moreira, A. L. N., Murshed, S. M. S., Palomo del Barrio, E., & Nikulin, A. (2020). A new approach for predicting the pool boiling heat transfer coefficient of refrigerant R141b and its mixtures with surfactant and nanoparticles using experimental data. Journal of Thermal Analysis and Calorimetry, 142(6), 2327–2339. https://doi.org/10.1007/s10973-020-09479-0
Köse, A., & Gönül, A. (2025). Evaluation of Environmental Sustainability of Nanofluid Use in Cooling Systems. In Doğanın Ritmi, Enerjinin Dönüşümü, Üretimin Gücü (I. Ulusal Enerji Dönüşümü ve Sürdürülebilirlik Konferansı) (pp. 166–178). İstanbul Gedik Üniversitesi. https://doi.org/10.61150/gedikyay.250311

Mohebali, M. M., & Baniamerian, Z. (2024). Effect of nanofluid sedimentation on heat transfer and critical heat flux in boiling flows. Journal of Thermal Analysis and Calorimetry, 149(15), 8225–8244. https://doi.org/10.1007/s10973-024-13303-4
Murshed, S. M., & de Castro, C. A. (2013). Boiling Heat Transfer and Droplet Spreading of Nanofluids. Recent Patents on Nanotechnology, 7(3), 216–223. https://doi.org/10.2174/18722105113079990005
Rashidi, S., Mahian, O., & Languri, E. M. (2018). Applications of nanofluids in condensing and evaporating systems. Journal of Thermal Analysis and Calorimetry, 131(3), 2027–2039. https://doi.org/10.1007/s10973-017-6773-7
Saidur, R., Leong, K. Y., & Mohammed, H. A. (2011). A review on applications and challenges of nanofluids. Renewable and Sustainable Energy Reviews, 15(3), 1646–1668. https://doi.org/10.1016/j.rser.2010.11.035
Sertkaya, A. A., & Canli, E. (2018). Effect of red mud as a nanofluid on cooling performance. Selcuk University Journal of Engineering Sciences (SUJES), Special Issue. https://sujes.selcuk.edu.tr/sujes/article/view/464
Sukarno, D. H. (2017). Challenges for nanofluid applications in heat transfer technology. Journal of Physics: Conference Series, 795, 012020. https://doi.org/10.1088/1742-6596/795/1/012020
Tang, X., Zhao, Y.-H., & Diao, Y. (2014). Experimental investigation of the nucleate pool boiling heat transfer characteristics of δ-Al2O3-R141b nanofluids on a horizontal plate. Experimental Thermal and Fluid Science, 52, 88–96. https://doi.org/10.1016/j.expthermflusci.2013.08.025
Trisaksri, V., & Wongwises, S. (2009). Nucleate pool boiling heat transfer of TiO2–R141b nanofluids. International Journal of Heat and Mass Transfer, 52(5–6), 1582–1588. https://doi.org/10.1016/j.ijheatmasstransfer.2008.07.041
Vajjha, R. S., & Das, D. K. (2012). A review and analysis on influence of temperature and concentration of nanofluids on thermophysical properties, heat transfer and pumping power. International Journal of Heat and Mass Transfer, 55(15–16), 4063–4078. https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.048
Wang, Y., Deng, K., Wu, J., Su, G., & Qiu, S. (2020). A mechanism of heat transfer enhancement or deterioration of nanofluid flow boiling. International Journal of Heat and Mass Transfer, 158, 119985. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119985

Details

Primary Language

English

Subjects

Chemical Engineering (Other)

Journal Section

Research Article

Authors

Muhammet Camcı ^*
0000-0003-4283-1307
Türkiye

Publication Date

September 15, 2025

Submission Date

August 21, 2025

Acceptance Date

September 2, 2025

Published in Issue

Year 2025 Volume: 8 Number: 2

DOI

https://doi.org/10.58692/jotcsb.1770014

IZ

https://izlik.org/JA99JZ37TL

Cite

RIS / Bibtex

APA

Camcı, M. (2025). Challanges of Using Nanofluids in Two-Phase Heat Transfer Applications. Journal of the Turkish Chemical Society Section B: Chemical Engineering, 8(2), 263-274. https://doi.org/10.58692/jotcsb.1770014

AMA

1.Camcı M. Challanges of Using Nanofluids in Two-Phase Heat Transfer Applications. JOTCSB. 2025;8(2):263-274. doi:10.58692/jotcsb.1770014

Chicago

Camcı, Muhammet. 2025. “Challanges of Using Nanofluids in Two-Phase Heat Transfer Applications”. Journal of the Turkish Chemical Society Section B: Chemical Engineering 8 (2): 263-74. https://doi.org/10.58692/jotcsb.1770014.

EndNote

Camcı M (September 1, 2025) Challanges of Using Nanofluids in Two-Phase Heat Transfer Applications. Journal of the Turkish Chemical Society Section B: Chemical Engineering 8 2 263–274.

IEEE

[1]M. Camcı, “Challanges of Using Nanofluids in Two-Phase Heat Transfer Applications”, JOTCSB, vol. 8, no. 2, pp. 263–274, Sept. 2025, doi: 10.58692/jotcsb.1770014.

ISNAD

Camcı, Muhammet. “Challanges of Using Nanofluids in Two-Phase Heat Transfer Applications”. Journal of the Turkish Chemical Society Section B: Chemical Engineering 8/2 (September 1, 2025): 263-274. https://doi.org/10.58692/jotcsb.1770014.

JAMA

1.Camcı M. Challanges of Using Nanofluids in Two-Phase Heat Transfer Applications. JOTCSB. 2025;8:263–274.

MLA

Camcı, Muhammet. “Challanges of Using Nanofluids in Two-Phase Heat Transfer Applications”. Journal of the Turkish Chemical Society Section B: Chemical Engineering, vol. 8, no. 2, Sept. 2025, pp. 263-74, doi:10.58692/jotcsb.1770014.

Vancouver

1.Muhammet Camcı. Challanges of Using Nanofluids in Two-Phase Heat Transfer Applications. JOTCSB. 2025 Sep. 1;8(2):263-74. doi:10.58692/jotcsb.1770014