Pollution Free and Sustainable Copper Production Using Greenhouse CO2

Abstract

The objectives of the present investigation to decrease the global pollution by utilizing the CO2 gas, in an effective way to produce the valuable metal copper, using low grade Cu ore which is termed as waste and not used for conventional Cu production. So the idea being waste and polluting waste are converted to useful products which will create employment, boost economy and reduce environment pollution. It is an innovative scheme for start-up. Carbonic acid produced by dissolving greenhouse gas CO2 was used for leaching low grade chalcopyrite ore under oxidizing condition. It is a single stage process with a single reactor where combined hydrometallurgical and electrometallurgical process occur. At anode an oxidizing condition is produced by dragging electron thereby increasing the rate of hydrometallurgical extraction producing Cu++ from CuFeS2. This generated Cu++ is simultaneously deposited at the cathode in the same reactor. The Cu produced was analysed and identified by RDR. The electrical power and energy consumption were computed. In the conventional cu extraction process from CuFeS2, sulphur come out as SO2 , the harmful polluting gas, in contrast in this process, sulphur came out as elemental sulphur and can be sold as by-product.

Keywords

• Global Pollution
• Greenhouse Gas
• Sustainable Development
• Cu Production
• Hydrometallurgy

References

1. [1] Egypt, M. (2001) Multipurpose Forest Management Plans Based on Geographic Information Systems Purpose Programming Method (Forestry Planning Planning Example), Ph.D. Thesis, KTU Graduate School of Natural and Applied Sciences, Trabzon.
2. [2] Akay, A. E., Erdas, O., Belen, B. (2006). Using GIS-Based Sediment Estimation Model, SEDMODL2 in Calculation of Sediment from Forest Roads. Workshop made of forestation and erosion control applications in semi-arid regions of Turkey.
3. [3] Altun, L., Yilmaz, M., Acar, C., Turna, I., Başkent, E. Z., & Bilgili, E. (2003). Evaluating the seasonal changes of water quality of the Değirmendere and Galyan Rivers (Trabzon, Turkey). Journal of Environmental Biology, 24(4), 415-422.
4. [4] Başkent, E. Z. (2001). Combinatorial optimization in forest ecosystem management modeling. Turkish Journal of Agriculture and Forestry, 25(3), 187-194.
5. [5] ETABS V13. Computers and structures Inc. New York, NY 10036, USA.
6. [6] ACI 209R-08. (2008). Guide for Modelling and Calculating Shrinkage and Creep in Hardened Concrete. American Concrete Institute, USA.