Ağartıcı Maddelerin Kayın ve Göknar Ahşaplarında Farklı Kesit Şekillerindeki Renk Değişimine Etkisi

Year 2023, Volume: 23 Issue: 2, 111 - 118, 01.10.2023

Özlem Bozdoğan Balçık , Turgay Özdemir

https://doi.org/10.17475/kastorman.1367940

Abstract

Çalışmanın amacı: Ağartma işlemlerinin ağaç türlerinin odunlarında renk değişimine etkilerinin araştırılmasıdır. Çalışmada ağaç türleri Doğu Kayını (Fagus Orientalis Lipsky.), Doğu Karadeniz Göknarı (Abies Nordmanniana subsp.) kullanılmıştır. Ağartma maddesi olarak sodyum hidroksit-hidrojen peroksit, oksalik asit, perasetik asit 1/3 seyreltilmiş, perasetik asit 1/6 seyreltilmiş ağartma maddesi olarak kullanılmıştır. Deneme numuneleri standartlara uygun olarak hazırlanmış ve renk değişimi ölçümleri yapılmıştır.
Çalışma alanı: Ahşap malzemede üst yüzey işlemleri
Materyal ve yöntem: Çalışmada iki ağaç türü ve bir vernik türü kullanılarak; ahşap malzemenin üzerine sürme yöntemi ile çeşitli ağartıcılar uygulanarak renk değişimleri test edilmiştir.
Temel sonuçlar: Çalışma sonucunda 1/6 oranında seyreltilmiş perasetik asit kayın ağacı ağartma ölçümlerinde tüm kesit şekillerinde, göknar ağacı ağartma ölçümlerinde ise kesit şekillerinde farklılıklar gözlenmiştir. Göknar odununda en iyi ağartma perasetik asit ile elde edilmiştir.
Araştırma vurguları: Ağartma işlemi, ahşap malzemenin kolaylıkla homojen bir renk almasını sağlar.Farklı kesit şekillerinde hücre dizilişileri farklı olduğundan dolayı ağartma oranları birbirinden farklıdır.Oksalik asit ile yapılan ağartmada ağaç malzemede renk değişimlerinde pek farklılık olmazken, sodyum hidroksit-hidrojen peroksit,perasetik asit ile ağartma sonucu numunelerin renk değişimlerinde önemli değişiklikler meydana gelmiştir.Bu farklılığın sebebi ağartma maddelerinin aşındırma derecelerinin farklı olmasından kaynaklanır.

Keywords

Ağartma, Renk Değişimi, Kesit Şekli, Doğu Kayını, Doğu Karadeniz Göknarı

The Effect of Bleaching Agents on Color Change in Different Section Shapes in Beech And Fir Woods

Abstract

Aim of study: It is an investigation of the effects of bleaching processes on the color change in the wood of tree species. Tree species Eastern Beech (Fagus Orientalis Lipsky.) and Eastern Black Sea Fir (Abies Nordmanniana subsp.) were used in the study. Sodium hydroxide-hydrogen peroxide, oxalic acid, peracetic acid diluted 1/3, peracetic acid diluted 1/6 were used as bleaching agents. Trial samples were prepared in accordance with standards and color change measurements were made.
Area of study: Surface treatments on wooden materials
Material and methods: In the study, two wood species and one varnish type were used; Color changes were tested by applying various bleaches to the wooden material by rubbing method.
Main results: As a result of the study, differences were observed in all cross-section shapes in beech wood bleaching measurements with 1/6 diluted peracetic acid, and differences were observed in cross-section shapes in fir wood bleaching measurements. The best bleaching of fir wood was achieved with peracetic acid.
Main results: As a result of the study, differences were observed in all cross-section shapes in the beech wood bleaching measurements with 1/6 diluted peracetic acid, and in the cross-section shapes in the fir tree bleaching measurements. The best bleaching of fir wood was achieved with peracetic acid.
Highlights: The bleaching process allows the wooden material to easily acquire a homogeneous color. Since the cell arrangements are different in different cross-sectional shapes, the bleaching rates are different from each other. While there is not much difference in the color changes in the wood material when bleached with oxalic acid, the samples are bleached as a result of bleaching with sodium hydroxide-hydrogen peroxide and peracetic acid. Significant changes have occurred in color changes. The reason for this difference is due to the different degrees of corrosion of bleaching agents.

Keywords

Bleaching, Color Change, Cross Sectional Shape, Eastern Beech, Eastern Black Sea Fir

References

• Akkuş, M. & Budakçı, M. (2020). Determination of color-changing effects of bleaching chemicals on some heat-treated woods. Journal of Wood Science, 66, 1-14. https://doi.org/10.1186/s10086-020-01916-w
• Anonymous (2009). “Minolta CR-231 Chromometer, ver 3.0.”, Device User Manual.
• ASTM D 2244 (2007). “Standard Practice for Calculation or Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates”, ASTM Standards, A.B.D., 1-13.
• Atar M., Yalınkılıç, A. C. & Keskin, H. (2019). “The effect of heat treatment on color change in varnished wood material”. Journal of Politeknik, 22(2), 407-413. DOI: 10.2339/polyteknik.404008
• Aykaç, S. & Sofuoğlu, S. D. (2021). Investigation of the Effect of Varnish Types on Surface Properties used in Bamboo Wooden Material. Journal of Polytechnic, 24(4), 1353-1363.
• Aytin, A., Çakıcıer, N., Çiftçi, S. & Akter, M. (2021). The effect of water based varnish color barrier on color change and hardness in natural wood veneer. Düzce University Faculty of Forestry Journal of Forestry, 17(1), 62-75. ISSN:2148-7871
• Beetsma, J. (2020). e CIELAB L∗ a∗ b∗ system—the method to quantify colors of coatings| prospector knowledge center.
• Berkel, A. (1970). Wood Material Technology, Istanbul University Faculty of Forestry Publications, Istanbul
• Budakci, M. (2006). Effect of outdoor exposure and bleaching on surface color and chemical structure of scots pine. Progress in Organic Coatings, 56(1), 46-52. https://doi.org/10.1016/j.porgcoat.2006.01.018
• Budakci, M. & Karal, I. (2017). Antifungal Effect of Lightening Process on Wood Material. Journal of Advanced Technology Sciences, 6(3), 369-382. ISSN:2147-345
• Chen, Y., Fan, Y., Gao, J. & Stark, N. M. (2012). The effect of heat treatment on the chemical and color change of black locust (Robinia pseudoacacia) wood flour. BioResources, 7(1), 1157-1170.
• Cheumani-Yona, A. M., Budija, F., Hrastnik, D., Kutnar, A., Pavlič, M., et al. (2015). Preparation of two-component polyurethane coatings from bleached liquefied wood. BioResources, 10(2), 3347-3363.
• Chou, P. L., Chang, H. T., Yeh, T. F. & Chang, S. T. (2008) Characterization the Conservation Effect of Clear Coatings on Photodegradation of Wood. Bioresources Technology, 99(5), 1073-1079.
• Çakıcıer, N. & Pak, E. (2022). The effect of accelerated aging on the color and gloss properties of uv system varnish layers applied to some domestic and foreign wood species. International Western Black Sea Journal of Engineering and Science, 4 (1), 1-1.
• Demirkır, C., Öztürk, H., & Çolakoğlu, G. (2017). Effects of press parameters on some technological properties of polystren composite plywood. Kastamonu University Journal of Forestry Faculty, 17(3), 517-522.
• Kurtoğlu, A. (2020). Wood Material Surface Treatments: Volume 1 General Information, University Publication No: 4262; Faculty Publications
• Lu, D., Xiong, X., Lu, G., Gui, C. & Pang, X. (2023). Effects of NaOH/H2O2/Na2SiO3 Bleaching Pretreatment Method on Wood Dyeing Properties. Coatings, 13(2), 233.
• Ren, J., Xiong, X., Tang, Y., Zhao, J., Fei, J., et al. (2022). Furniture part family division of customized wooded cabinet doors using multi-attribute cross clustering. Journal of Forestry Engineering, 7, 187-193.
• Sandberg, D., (1999). Weathering on radial and tangential surfaces of pine and spruce, Holzforshung, 53(4), 355-364. https://doi.org/10.1515/HF.1999.059
• Shakri, A. & Seman, M. (1995). Finishing properties of Acacia mangium, Paraserianthes falcataria and Gmelina arborea timbers: some important parameters. Journal of Tropical Forest Products, 1(1), 83-89.
• Söğütlü, C. & Döngel, N. (2009). Effect of ımpregnation process on wood material surface roughness and color change. Journal of Polytechnic, 12(3), 179-184.
• Söğütlü, C. & Sönmez, A. (2013). Color change effect of uv rays on some domestic tree treated with different preservatives. Journal of Gazi University Faculty of Engineering and Architecture, 21(1) ,184-189.
• Suleman, Y. H. & Rashid, S. H. (1999). Chemical treatment to improve the wood finish. Wood and Fiber Science, 31(3), 300-305.
• Xu, W., Wu, Z., Lu, W., Yu, Y., Wang, J., et al. (2022). Investigation on cutting power of wood–plastic composite using response surface methodology. Forests, 13(9), 1397.