Research Article
BibTex RIS Cite

The effects of step over, feed rate and finish depth on the surface roughness of fiberboard processed with CNC machine

Year 2018, Volume: 1 Issue: 2, 86 - 93, 26.12.2018
https://doi.org/10.33725/mamad.481278

Abstract

Fiberboard is used extensively in furniture production in all over the
word. One of the most important reasons for the preference of fibreboard is the
easy shaping of its surfaces. In the past, the surfaces of the fiberboard were
processed using conventional machines. Nowadays, Computer Numerical Control
(CNC) machines are used in the processing of the fiberboard. CNC machines is
operated using some computer control commands which provide the action of the
machine.  The code file consisting of
these commands contains some adjustments such as step over, spindle speed, feed
rate, finish depth, machining strategy, step down, plunge rate etc. These
adjustments change the surface roughness of the processed section of fiberboard.
In this study, the influence of finish depth (2 and 6 mm), step over (40%, 60%
and 80%) and feed rate (3, 5 and 7 m/min) settings on the surface roughness of fiberboard
were investigated. Ra roughness value
of processed section of fiberboard test samples was determined using contact
stylus method.  According to the obtained
data, it was concluded that the surface roughness increased as finish depth,
feed rate and step over are increased.

References

  • Bal, B.C., and Bektaş, İ, (2018), Determination of relationship between density and some physical properties in beech and poplar wood, Furniture and Wooden Material Research Journal, 1(1), 1-10.
  • Bal, B.C.,(2018), The effects of some tool paths adjustments of CNC machines on surface roughness and processing time of fiberboards, Furniture and Wooden Material Research Journal, 1(1), 21-30.
  • Bektaş, İ.(1997), Kızılçam odununun teknolojik özellikleri ve yörelere göre değişimi, İÜ, Fen Bilimleri Enstitüsü, Doktora Tezi, İstanbul.
  • Benardos, P.G., and Vosniakos, G. C., (2003), Predicting surface roughness in machining: a review, International Journal of Machine Tools And Manufacture, 43(8), 833-844.
  • Bozkurt, Y., ve Göker, Y. (1996), Fiziksel ve mekanik ağaç teknolojisi, Yılmaz Bozkurt, Yener Göker İÜ, Orman Fakültesi Yayınları, No:3944, İstanbul.
  • Davis, E.M., (1962), Machining and related characteristics of United States hardwoods, Technical Bulletin No: 1267, US Department of Agriculture Forest Service.
  • De Deus, P. R., de Sampaio Alves, M. C., and Vieira, F. H.A. (2015), The quality of MDF work pieces machined in CNC milling machine in cutting speeds, feed rate, and depth of cut, Meccanica, 50 (12), 2899-2906.
  • Erer, H., (2000), CNC takım tezgâhlarının gelişimi, http://www.turkcadcam.net/rapor/cnc-ttg/index.html, son erişim tarihi: 18.06.2018.
  • Karagöz, Ü., (2011), CNC ile işlemede ahşap malzemenin yüzey kalitesini etkileyen faktörler, Kastamonu Üniversitesi Orman Fakültesi Dergisi, 11(1), 18-26.
  • Kollmann, F., and Cote, W.A. (1968), Principles of wood science and technology. Springer Verlag.
  • Lin, R.J.T., Houts, J.V., Bhattacharyya, D., (2006), Machinability investigation of medium density fiberboard, Holzforschung, 60(1), 71-77.
  • Lou, M. S., Chen, J. C., and Li, C. M., (1998), Surface roughness prediction technique for CNC end-milling, Journal of Industrial Technology, 15(1), 1-6.
  • Sedlecký, M., (2017), Surface roughness of medium-density fiberboard (MDF) and edge-glued panel (EGP) after edge milling, BioResources, 12(4), 8119-8133.
  • Sedlecký, M., Kvietková, M. S., and Kminiak, R. (2018), Medium-density fiberboard (MDF) and edge-glued panels (EGP) after edge milling-surface roughness after machining with different parameters. BioResources, 13(1), 2005-2021.
  • Sofuoglu, S.D. (2015), Determination of Optimal machining parameters of massive wooden edge-glued panels made of European larch (Larix decidua Mill.) using Taguchi Design Method, BioResources, 10(4), 7772-7781.
  • Sütçü, A., and Karagöz, Ü. (2012), Effect of machining parameters on surface quality after face milling of MDF, Wood Research, 57(2), 231-240.
  • Sütçü, A., and Karagöz, Ü. (2013), The influence of process parameters on the surface roughness in aesthetic machining of wooden edge-glued panels (EGPs), BioResources, 8(4), 5435-5448.
  • TS 971, Surface roughness-parameters, their values and general rules for specifying requirements, TSE, Ankara, 1999.

CNC makineleri ile işlenen lif levhaların yüzey pürüzlülüğü üzerine bıçak adımı, besleme hızı ve kesme derinliğinin etkileri

Year 2018, Volume: 1 Issue: 2, 86 - 93, 26.12.2018
https://doi.org/10.33725/mamad.481278

Abstract

Lif levha tüm dünyada mobilya üretiminde büyük miktarlarda
kullanılmaktadır. Lif levhanın tercih edilmesinin en önemli nedenlerinden biri
yüzeyinin kolay şekillendirilmesidir. Geçmişte, Lif levhaların yüzeyleri
konvansiyonel makinelerle işlenmiştir. Günümüzde, Bilgisayar Sayısal Kontrol
(CNC) makineleri lif levhaların işlenmesinde kullanılmaktadır. CNC makineleri,
makinenin hareketini sağlayan bilgisayar kontrol komutları kullanılarak
çalıştırılmaktadır. Bu komutlardan oluşan kod dosyaları, bıçak adımı, bıçak
motoru hızı, besleme hızı, kesme derinliği, işleme taktiği, bıçak dalma
derinliği, dalma hızı gibi birçok ayarlamaları içermektedir. Bu ayarlamalar, lif
levhanın işlenen kısmının yüzey pürüzlülüğünü değiştirmektedir. Bu çalışmada,
kesme derinliği, (2 mm ve 6 mm) bıçak adımı (%40, %60 ve %80) ve besleme hızı
(3, 5 ve 7 m/min) ayarlarının lif levhanın yüzey pürüzlülüğü üzerine etkileri
araştırılmıştır. Lif levha test örneklerinin işlenen kısımlarının Ra pürüzlülük değeri iğne taramaları
temas yöntemi kullanılarak belirlenmiştir. Elde edilen verilere göre; kesme
derinliği, besleme hızı ve bıçak adımı arttıkça yüzey pürüzlüğünün arttığı
belirlenmiştir. 

References

  • Bal, B.C., and Bektaş, İ, (2018), Determination of relationship between density and some physical properties in beech and poplar wood, Furniture and Wooden Material Research Journal, 1(1), 1-10.
  • Bal, B.C.,(2018), The effects of some tool paths adjustments of CNC machines on surface roughness and processing time of fiberboards, Furniture and Wooden Material Research Journal, 1(1), 21-30.
  • Bektaş, İ.(1997), Kızılçam odununun teknolojik özellikleri ve yörelere göre değişimi, İÜ, Fen Bilimleri Enstitüsü, Doktora Tezi, İstanbul.
  • Benardos, P.G., and Vosniakos, G. C., (2003), Predicting surface roughness in machining: a review, International Journal of Machine Tools And Manufacture, 43(8), 833-844.
  • Bozkurt, Y., ve Göker, Y. (1996), Fiziksel ve mekanik ağaç teknolojisi, Yılmaz Bozkurt, Yener Göker İÜ, Orman Fakültesi Yayınları, No:3944, İstanbul.
  • Davis, E.M., (1962), Machining and related characteristics of United States hardwoods, Technical Bulletin No: 1267, US Department of Agriculture Forest Service.
  • De Deus, P. R., de Sampaio Alves, M. C., and Vieira, F. H.A. (2015), The quality of MDF work pieces machined in CNC milling machine in cutting speeds, feed rate, and depth of cut, Meccanica, 50 (12), 2899-2906.
  • Erer, H., (2000), CNC takım tezgâhlarının gelişimi, http://www.turkcadcam.net/rapor/cnc-ttg/index.html, son erişim tarihi: 18.06.2018.
  • Karagöz, Ü., (2011), CNC ile işlemede ahşap malzemenin yüzey kalitesini etkileyen faktörler, Kastamonu Üniversitesi Orman Fakültesi Dergisi, 11(1), 18-26.
  • Kollmann, F., and Cote, W.A. (1968), Principles of wood science and technology. Springer Verlag.
  • Lin, R.J.T., Houts, J.V., Bhattacharyya, D., (2006), Machinability investigation of medium density fiberboard, Holzforschung, 60(1), 71-77.
  • Lou, M. S., Chen, J. C., and Li, C. M., (1998), Surface roughness prediction technique for CNC end-milling, Journal of Industrial Technology, 15(1), 1-6.
  • Sedlecký, M., (2017), Surface roughness of medium-density fiberboard (MDF) and edge-glued panel (EGP) after edge milling, BioResources, 12(4), 8119-8133.
  • Sedlecký, M., Kvietková, M. S., and Kminiak, R. (2018), Medium-density fiberboard (MDF) and edge-glued panels (EGP) after edge milling-surface roughness after machining with different parameters. BioResources, 13(1), 2005-2021.
  • Sofuoglu, S.D. (2015), Determination of Optimal machining parameters of massive wooden edge-glued panels made of European larch (Larix decidua Mill.) using Taguchi Design Method, BioResources, 10(4), 7772-7781.
  • Sütçü, A., and Karagöz, Ü. (2012), Effect of machining parameters on surface quality after face milling of MDF, Wood Research, 57(2), 231-240.
  • Sütçü, A., and Karagöz, Ü. (2013), The influence of process parameters on the surface roughness in aesthetic machining of wooden edge-glued panels (EGPs), BioResources, 8(4), 5435-5448.
  • TS 971, Surface roughness-parameters, their values and general rules for specifying requirements, TSE, Ankara, 1999.
There are 18 citations in total.

Details

Primary Language English
Subjects Material Production Technologies
Journal Section Articles
Authors

Bekir Cihad Bal 0000-0001-7097-4132

Elif Akçakaya This is me 0000-0001-7097-4132

Publication Date December 26, 2018
Submission Date November 10, 2018
Acceptance Date December 11, 2018
Published in Issue Year 2018 Volume: 1 Issue: 2

Cite

APA Bal, B. C., & Akçakaya, E. (2018). The effects of step over, feed rate and finish depth on the surface roughness of fiberboard processed with CNC machine. Mobilya Ve Ahşap Malzeme Araştırmaları Dergisi, 1(2), 86-93. https://doi.org/10.33725/mamad.481278

Cited By











Open Access and International Peer-reviewed Journal

18332  18333 3221732219   18334  18335  18336 18434

32216 32218 32220 32221  32273 32274 

32275 32308 32309 32312

32332