Computer based speed control application for universal motor

Year 2023, , 112 - 118, 01.07.2023

Sabir Rüstemli , Emin Ağrali

https://doi.org/10.51354/mjen.1149121

Abstract

In this study, speed control of alternative current (AC) universal motor is made in a computerized manner using PIC16F84A and PIC18F2550. AC universal motor speed control is realized by triggering the motor power circuit, triac with the phase angle control method by programming PIC16F84A. In the phase angle control method zero crossing points of AC line signal are detected by zero crossing detector and applied to the analog input of PIC16F84A. Zero crossing information applied to the microcontroller has provided phase control at a desired angle value in each alternance of the line. Motor speed control commands via computer are made by means of the control panel designed under Visual Basic 6.0 platform by using PIC18F2550 microcontroller based control card. Application results show that the speed control performed provides practical and easy control, is convenient, sensitive, and economic and also can immediately be adapted to different applications compared to the present analog control.

Keywords

universal motor, phase angle control, visual basic, PIC.

References

• [1] G. Bal,, Special Electrical Machinery. ISBN 975 02 01574, Seçkin Publication, Ankara, TURKEY, 2006. [2] J. Kaňuch, P Višnyi. “DC Drive For Universal Motor”, Technical University of Košice, Zeszyty Problemowe – Maszyny Elektryczne, Koszyce. vol. 84, pp. 7-11, 2009.
• [3] J. Yang, H. Li, Y. Qin, X. Yao, Y. Yuan, A. Guo, “Fuzzy Interfering Control of Universal Motor for Electromagnetic Nonlinearity”, School of Information Science and Engineering, Lanzhou University, Lanzhou 730000,CHINA, 2009.
• [4] S. J. Chapman, Fundamentals of Electric Machinery, ISBN: 9789754360691, Seçkin Publication, 746 Pages, İstanbul, TURKEY, 2005.
• [5] A. Hughes, Electric Motors and Drives Fundamentals. Types and Applications Third edition, School of Electronic and Electrical Engineering, University of Leeds.684, ENGLAND, 2006.
• [6] N. Abut, Power Electronics. Kocaeli University Engineering Faculty, Kocaeli, TURKEY, 2001.
• [7] B. K. Bose, Power Electronics and Variable Frequency Drives. IEEE Press, 283, 13 February 1997.
• [8] O. Kızılbey, Sea Thermometer, İstanbul Technical University, Electrical-Electronics Faculty, İstanbul, TURKEY, 2005.
• [9] I. Senol, M. Demirtas, S. Rustemov and B. Gumus , “Position control of induction motor a new‐bounded fuzzy sliding mode controller” COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, vol. 24 no. 1 pp. 145-157, 2005.
• [10] S. Rustemli, M. Yilmaz and M. Demirtas, “Ripple reduction at speed and torque of step motors used on a two-axis robot arm”, Robotics and Computer-Integrated Manufacturing, vol. 26, pp. 759–767, 2010. [11] M. Bourogaoui, H. Ben Attia Sethom, I. Slama-Belkhodja and H. Sammoud, “An Improved Sensorless IPMSM Control at Low speeds and Standstill for Washing Machine Drives Using dsPIC Technology”, CEAI, vol. 17, no. 1, pp. 22-30, 2015.
• [12] E. Ağralı, S. Rüstemli and S. Yıldız, “Alternative Current (AC) Supply Universal Motor Based on Computer Controlling Rate On Computer”, 2016 INESEC, pp. 308-316.
• [13] S. Rüstemli, E. Ağralı and S. Yıldız, “Changing of Direction of Universal Motor Rotation by Using the Computer Supported PIC Controller”, 2016 INESEC, pp. 317-327.
• [14] S. Rüstemli and E. Ağralı, “Computer Based Control of Universal Motor by Using PIC”, 2016 ICNASE, pp. 589-598.