Year 2020, Volume 8 , Issue 2, Pages 132 - 137 2020-12-21

Pumice and perlite co-substituted hydroxyapatite: fabrication and characterization

Serap (GÜNGÖR) KOC [1]


The purpose of this study was to combine hydroxyapatite (HA) with pumice and perlite. A precipitation procedure was applied for synthesizing pure and doped hydroxyapatite. Samples were sintered at 1100°C for 1 h. These doped structures are characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM-EDS) and X-ray Fluorescence. Higher SiO2 and Al2O3 content was shown by XRF analysis. The XRD results revealed the existence of the HA, β-TCP and Ca5(PO4)2SiO4 phases. SEM images confirmed the sintering temperature and number of dopants had significant effect on grain sizes of the samples.
biomaterials, pumice, perlite
  • Dorozhkin S.V., ‘Calcium orthophosphate-containing biocomposites and hybrid biomaterials for biomedical applications’, Journal of Functional Biomaterials, 6, (2015), 708–832.
  • Gervaso F., Scalera F., Padmanabhan S.K., Sannino A., Licciulli A., ‘High performance hydroxyapatite scaffolds for bone tissue engineering applications’, International Journal of Applied Ceramics Technolgy, 9, (2012), 507–516.
  • Ciobanu G., Ilisei S., Luca C., Carja G., Ciobanu O., ‘The effect of vitamins to hydroxyapatite growth on porous polyurethane substrate’, Progress in Organic Coating, 74, (2012), 648–653.
  • Gündüz, L., Yılmaz, İ., 1998. Orta Anadolu Pomza Oluşumlarının Endüstriyel Olarak Kullanılabilirlik Ölçütleri. 4. Endüstriyel Hammaddeler Sempozyumu 118-19 Ekim 2001, İzmir, TÜRKİYE, 214-215.
  • Ciobanu G., Bargan A.M., Luca C., ‘New bismuth-substituted hydroxyapatite nanoparticles for bone tissue engineering’, JOM, 67, (2015), 2534–2542.
  • Tahmasebifar A., Gungor S., Evis Z., ‘The microstructural investigation of nano- calcium phosphates doped with fluoride ions’. Journal of the Faculty of Engineering and Architecture of Gazi University, 30, (2015), 1-7.
  • Koc G. S., ‘Synthesis and characterization of strontium and chlorine co-doped tricalcium phosphate’. Materials Letters, 248, (2019),69-72.
  • Ahn, E.S., Gleason, N.J., Nakahira, A. ve Ying, J.Y., ‘Nanostructure processing of hydroxyapatite-based bioceramics’, Nano Letters, 1, (2001), 149-153.
  • Georgiou G., Knowles J.C., ‘Glass reinforced hydroxyapatite for hard tissue surgery- part 1: mechanical properties’, Biomaterials, 22, (2001), 2811-5. Bohur B.G., ‘HVOF Tekniğiyle Ti6Al4V Metal Altlık Yüzeyine Farklı Silika Kaynağı İçeren Biyoseramiklerin Kaplanması’, Yüksek Lisans Tezi, Afyon Kocatepe Üniversitesi, Fen Bilimleri Enstitüsü, (2018).
  • Kılınç-Aksay, E., 2005. İzmir-Menderes Yöresi Pomza Cevherinin Kullanımına Yönelik Teknolojik Özelliklerinin Araştırılması, Dokuz Eylül Üniversitesi Fen Bilimleri Enstitüsü Doktora Tezi, 6-7.
  • Li X., Yang W., Zou Q., Zou Y., ‘Investigation on microstructure, composition, and cytocompatibility of natürel pumice for potential biomedical application’, Tissue Engineering Part C, 16-3, (2010), 427-34.
  • Komur B., Lohse T., Can H.M., Khalilova G., Geçimli Z.N., Aydoğdu M.O., Kalkandelen C., Stan G.E., Sahin Y.M., Sengil A.Z., Suleymanoglu M., Kuruca S.E., Oktar F.N., Salman S., Ekren N., Ficai A., Gundez O., ‘Fabrication of naturel pumice/hydroxyapatite composite for biomedical engineering’. BioMedical Engineering, (2016), 15:81.
  • Samar M., Saxena S., ‘Study of chemical and physical properties of perlite and its apllications in India’, International Journal of Science Technology and Management, 5:4, (2016), 70-80.
  • Yang C., Guo Y.K., Zhang M.L., ‘Thermal decomposition and mechanical properties of hydroxyapatite ceramic’. Transactions Nonferrous Metals Society China. 20, (2010), 254–8.
  • Komur B. et. al. ‘Fabrication of natürel pumice/hydroxyapatite composite for biomedical engineering’ BioMedical Engineering, (2016), 15, 81.
  • Mestres G., Le Van C., Ginebra M.P.,’ Silicon-stabilized α-tricalcium phosphate and its use in a calcium phosphate cement: characterization and cell response’. Acta Biomaterials, 8(3), (2012), 1169–79.
Primary Language en
Subjects Engineering
Journal Section Research Article
Authors

Orcid: 0000-0002-4547-0642
Author: Serap (GÜNGÖR) KOC (Primary Author)
Institution: YÜZÜNCÜ YIL ÜNİVERSİTESİ
Country: Turkey


Dates

Publication Date : December 21, 2020

Bibtex @research article { mjen826222, journal = {MANAS Journal of Engineering}, issn = {1694-7398}, eissn = {1694-7398}, address = {}, publisher = {Kyrgyz-Turkish Manas University}, year = {2020}, volume = {8}, pages = {132 - 137}, doi = {10.51354/mjen.826222}, title = {Pumice and perlite co-substituted hydroxyapatite: fabrication and characterization}, key = {cite}, author = {(güngör) Koc, Serap} }
APA (güngör) Koc, S . (2020). Pumice and perlite co-substituted hydroxyapatite: fabrication and characterization . MANAS Journal of Engineering , 8 (2) , 132-137 . DOI: 10.51354/mjen.826222
MLA (güngör) Koc, S . "Pumice and perlite co-substituted hydroxyapatite: fabrication and characterization" . MANAS Journal of Engineering 8 (2020 ): 132-137 <https://dergipark.org.tr/en/pub/mjen/issue/58226/826222>
Chicago (güngör) Koc, S . "Pumice and perlite co-substituted hydroxyapatite: fabrication and characterization". MANAS Journal of Engineering 8 (2020 ): 132-137
RIS TY - JOUR T1 - Pumice and perlite co-substituted hydroxyapatite: fabrication and characterization AU - Serap (güngör) Koc Y1 - 2020 PY - 2020 N1 - doi: 10.51354/mjen.826222 DO - 10.51354/mjen.826222 T2 - MANAS Journal of Engineering JF - Journal JO - JOR SP - 132 EP - 137 VL - 8 IS - 2 SN - 1694-7398-1694-7398 M3 - doi: 10.51354/mjen.826222 UR - https://doi.org/10.51354/mjen.826222 Y2 - 2020 ER -
EndNote %0 MANAS Journal of Engineering Pumice and perlite co-substituted hydroxyapatite: fabrication and characterization %A Serap (güngör) Koc %T Pumice and perlite co-substituted hydroxyapatite: fabrication and characterization %D 2020 %J MANAS Journal of Engineering %P 1694-7398-1694-7398 %V 8 %N 2 %R doi: 10.51354/mjen.826222 %U 10.51354/mjen.826222
ISNAD (güngör) Koc, Serap . "Pumice and perlite co-substituted hydroxyapatite: fabrication and characterization". MANAS Journal of Engineering 8 / 2 (December 2020): 132-137 . https://doi.org/10.51354/mjen.826222
AMA (güngör) Koc S . Pumice and perlite co-substituted hydroxyapatite: fabrication and characterization. MJEN. 2020; 8(2): 132-137.
Vancouver (güngör) Koc S . Pumice and perlite co-substituted hydroxyapatite: fabrication and characterization. MANAS Journal of Engineering. 2020; 8(2): 132-137.
IEEE S. (güngör) Koc , "Pumice and perlite co-substituted hydroxyapatite: fabrication and characterization", MANAS Journal of Engineering, vol. 8, no. 2, pp. 132-137, Dec. 2020, doi:10.51354/mjen.826222