Molecularly-imprinted silica nanoparticles for rapid and selective detection of atenolol in artificial urine samples

Year 2021, Volume: 9 Issue: Special 1, 43 - 48, 30.04.2021

Adem Zengin

https://doi.org/10.51354/mjen.859016

Cited By: 1

Abstract

 Herein, a novel molecularly imprinted polymer was synthesized on silica nanoparticles via surface imprinting approach for rapid, sensitive and selective detection of atenolol in artificial urine samples. For this purpose, silica nanoparticles were firstly modified with methacryloxy group for surface initiated polymerization and then, polymerization was carried out in the presence of 2-hydroxyethyl methacrylate (functional monomer), ethylene glycol dimethacrylate (cross-linker), azobisisobutyronitrile (initiator), atenolol (template) and acetonitrile (porogen). The surface characterization of imprinted nanoparticles indicated that a thin polymer layer was grafted on the silica nanoparticles. The rebinding properties of the imprinted nanoparticles were investigated in detail and the results revealed that the imprinted nanoparticles had high adsorption capacity (32.06 mg/g), fast adsorption kinetics (15 min for equilibration), high imprinting factor (4.14) towards atenolol and good regeneration ability. The imprinted nanoparticles were also used as selective sorbent for selective extraction and determination of atenolol in artificial urine samples. The results showed that the proposed method good recovery percentages (98.6 %-100.1%) with low standard deviations (less than 4.4%). It is believed that the atenolol-imprinted silica nanoparticles can be used as an alternative sorbent for selective quantification of atenolol in artificial urine samples.

Keywords

Molecularly-imprinted polymers, surface imprinting, silica nanoparticles, atenolol, artificial urine

References

• [1] Odabaşı M., Uzun L., Baydemir G., Aksoy N.H., Acet Ö., Erdönmez D., "Cholesterol imprinted composite membranes for selective cholesterol recognition from intestinal mimicking solution", Colloids and Surfaces B: Biointerfaces, 163, (2018), 266-274.
• [2] Turan E., Şahin F., "Molecularly imprinted biocompatible magnetic nanoparticles for specific recognition of Ochratoxin A", Sensors and Actuators B: Chemical, 227, (2016), 668-676.
• [3] Ansell R.J., Kriz D., Mosbach K., "Molecularly imprinted polymers for bioanalysis: chromatography, binding assays and biomimetic sensors", Current Opinion in Biotechnology, 7, (1996), 89-94.
• [4] Dechtrirat D., Yarman A., Peng L., Lettau K., Wollenberger U., Mosbach K., Scheller F.W., 2 - Catalytically Active MIP Architectures, in: S. Li, S. Cao, S.A. Piletsky, A.P.F. Turner (Eds.) Molecularly Imprinted Catalysts, Elsevier, Amsterdam, 2016, pp. 19-34.
• [5] Mo G., Qin D., Jiang X., Zheng X., Mo W., Deng B., "A sensitive electrochemiluminescence biosensor based on metal-organic framework and imprinted polymer for squamous cell carcinoma antigen detection", Sensors and Actuators B: Chemical, 310, (2020), 127852.
• [6] Regal P., Díaz-Bao M., Barreiro R., Cepeda A., Fente C., "Application of molecularly imprinted polymers in food analysis: clean-up and chromatographic improvements", Open Chemistry, 10, (2012), 766-784.
• [7] Cormack P.A.G., Elorza A.Z., "Molecularly imprinted polymers: synthesis and characterisation", Journal of Chromatography B, 804, (2004), 173-182.
• [8] Gupta P., Goyal R.N., "Amino Functionalized Graphene Oxide and Polymer Nanocomposite Based Electrochemical Platform for Sensitive Assay of Anti-Doping Drug Atenolol in Biological Fluids", Journal of The Electrochemical Society, 163, (2016), B601-B608.
• [9] Hasanah A.N., Dwi Utari T.N., Pratiwi R., "Synthesis of Atenolol-Imprinted Polymers with Methyl Methacrylate as Functional Monomer in Propanol Using Bulk and Precipitation Polymerization Method", Journal of Analytical Methods in Chemistry, 2019, (2019), 9853620.
• [10] Kannappan V., Mannemala S.S., "Simultaneous enantioseparation and purity determination of chiral switches of amlodipine and atenolol by liquid chromatography", Journal of Pharmaceutical and Biomedical Analysis, 120, (2016), 221-227.
• [11] Shah J.V., Patel D.P., Shah P.A., Sanyal M., Shrivastav P.S., "Simultaneous quantification of atenolol and chlorthalidone in human plasma by ultra-performance liquid chromatography–tandem mass spectrometry", Biomedical Chromatography, 30, (2016), 208-216.
• [12] Yilmaz B., Arslan S., "Determination of Atenolol in Human Urine by Gas Chromatography-Mass Spectrometry Method", Journal of Chromatographic Science, 49, (2011), 365-369.
• [13] Arvand M., Vejdani M., Moghimi M., "Construction and performance characterization of an ion selective electrode for potentiometric determination of atenolol in pharmaceutical preparations", Desalination, 225, (2008), 176-184.
• [14] Damiani P.C., "Determination of atenolol in human urine by emission–excitation fluorescence matrices and unfolded partial least-squares with residual bilinearization", Talanta, 85, (2011), 1526-1534.
• [15] Sapir A., Shalev A.H., Skalka N., Bronshtein A., Altstein M., "Development of an enzyme-linked immunosorbent assay and a beta-1 adrenergic receptor–based assay for monitoring the drug atenolol", Environmental Toxicology and Chemistry, 32, (2013), 585-593.
• [16] Mellon V., Rinaldi D., Bourgeat-Lami E., D'Agosto F., "Block Copolymers of γ-Methacryloxypropyltrimethoxysilane and Methyl Methacrylate by RAFT Polymerization. A New Class of Polymeric Precursors for the Sol−Gel Process", Macromolecules, 38, (2005), 1591-1598.
• [17] Lopez C., Claude B., Morin P., Pelissou M., Pena R., Max J.-P., Ribet J.-P., "Synthesis and study of a molecularly imprinted polymer for specific solid-phase extraction of vinflunine and its metabolite from biological fluids", Journal of Separation Science, 34, (2011), 1902-1909.
• [18] Zengin A., Tamer U., Caykara T., "A SERS-Based Sandwich Assay for Ultrasensitive and Selective Detection of Alzheimer’s Tau Protein", Biomacromolecules, 14, (2013), 3001-3009.
• [19] Bilici M., "Synthesis of a Novel Molecularly Imprinted Polymer for the Sensitive and Selective Determination of Artemisinin in Urine Samples Based on Solid-Phase Extraction (SPE) and Determination with High-Performance Liquid Chromatography (HPLC)", Analytical Letters, (2020), 1-17.
• [20] Gorbani Y., Yılmaz H., Basan H., "Spectrofluorimetric determination of atenolol from human urine using high-affinity molecularly imprinted solid-phase extraction sorbent", Luminescence, 32, (2017), 1391-1397.
• [21] Zengin A., Badak M.U., Aktas N., "Selective separation and determination of quercetin from red wine by molecularly imprinted nanoparticles coupled with HPLC and ultraviolet detection", Journal of Separation Science, 41, (2018), 3459-3466.