The Effect of Repeated Firings on the Color Change of Metal Based Ceramics Produced with Different Techniques

Year 2023, Volume: 5 Issue: 2, 67 - 74, 28.08.2023

Mehmet Gökberkkaan Demirel Ali Riza Tuncdemir

Abstract

Aim: The purpose of this study was to compare the effects of repeated firings on the color change of metal-ceramic restorations with different porcelain thicknesses and metal coping fabrication methods.
Material and Methods: A total of 30 disc-shaped samples of 1 mm thickness and 13 mm diameter were produced using selective laser melting (SLM) and conventional casting (CC) methods. Feldspathic porcelain in thicknesses of 0.7, 1.2 and 1.7 mm were then applied to each group (n = 10). Each sample was subjected to five firing processes. After each repeated firing process, color measurement was performed using a spectrophotometer. One-way analysis of variance was used for the statistical analyses and Tukey’s test was used for post-hoc analyses (p = 0.05).
Results: There were significant differences in color changes both groups (p < 0.05). The SLM samples underwent more color changes than the CC samples.
Conclusion: As a result of the study it was determined that repeated firings and an increase in the porcelain thickness enhanced color changes. Moreover, the color of SLM samples changed more than the CC samples.

Keywords

Color change, porcelain thickness, repeated firings, selective laser melting, spectrophotometer

Supporting Institution

the board of scientific researches and projects from Necmettin Erbakan University

Project Number

181424001

Tekrarlanan Fırınlamaların Farklı Tekniklerle Üretilen Metal-Seramik Restorasyonların Renk Değişimine Etkisi

Abstract

Amaç: Bu çalışmanın amacı, farklı porselen kalınlıklarına ve metal altyapı oluşturma yöntemlerine sahip metal-seramik restorasyonların tekrarlayan pişirme işlemlerinin renk değişimleri üzerindeki etkilerini karşılaştırmaktır.
Gereç ve Yöntemler: Toplam 30 disk şeklindeki örnek, seçici lazer eritme (SLM) ve geleneksel döküm (CC) yöntemleri kullanılarak 1 mm kalınlığında ve 13 mm çapında üretildi. Her gruba (n = 10) sırasıyla 0,7, 1,2 ve 1,7 mm kalınlıklarında feldspatik porselen uygulandı. Her örnek beş pişirme işlemine tabi tutuldu. Her tekrarlayan pişirme işleminden sonra, bir spektrofotometre kullanılarak renk ölçümü yapıldı. İstatistiksel analizler için tek yönlü varyans analizi kullanıldı ve post-hoc analizler için Tukey testi kullanıldı (p = 0.05).
Bulgular: Her iki grup arasında renk değişikliklerinde önemli farklılıklar vardı (p < 0.05). SLM örnekleri CC örneklerine göre daha fazla renk değişikliği gösterdi.
Sonuç: Çalışmanın sonucunda, tekrarlanan fırınlamaların ve porselen kalınlığının artmasının renk değişimini de artırdığı belirlendi. Ayrıca, SLM örneklerinin rengi CC örneklerinden daha fazla değişti.

Keywords

Porselen kalınlığı, Renk değişimi, Selektif lazer ergitme, Spektrofotometre, Tekrarlanan fırınlama

Project Number

181424001

References

• 1. Joiner A. Tooth colour: a review of the literature. J Dent. 2004;32:3–12.
• 2. Al Dosari A. Reliability of tooth shade perception by dental professionals and patients. Pakistan Oral Dent J. 2010;30:244–9.
• 3. Jarad FD, Russell MD, Moss BW. The use of digital imaging for colour matching and communication in restorative dentistry. Br Dent J. 2005;199:43–9.
• 4. O’Brien WJ. Dental materials and their selection. 4th ed. Chicago: Quintessence Pub. Co; 2008.
• 5. Özdemir H, Duymus Z. The effect of laboratory procedures and repeated-glazing on color of metal-ceramic restoration. Contemp Clin Dent. 2019;10:239.
• 6. Ahmadzadeh A, Mansourinejad S, Mansourinejad S, et al. Spectrophotometric comparison of two porcelain systems, VMK master and VM13 with the VITA 3D-master shade guide (An in vitro study). Dent Res J (Isfahan). 2022;19:35.
• 7. Yilmaz B, Özçelik TB, Wee AG. Effect of repeated firings on the color of opaque porcelain applied on different dental alloys. J Prosthet Dent. 2009;101:395–404.
• 8. Al Hamad K, Qadan M, Al Wahadni A. Spectrophotometric analysis of the influence of metal alloy choice, opaque thickness, and repeated firing on the shade of metal ceramic restorations. J Esthet Restor Dent. 2016;28:56–67.
• 9. Brewer JD, Wee A, Seghi R. Advances in color matching. Dent Clin North Am 2004;48:341–58.
• 10. Johnston WM, Kao EC. Assessment of appearance match by visual observation and clinical colorimetry. J Dent Res. 1989;68:819–22.
• 11. Alshahrani A, Alhamdan EM, Alsahhaf A, et al. Influence of contemporary ceramo-metallic crown decontamination on the surface roughness, color stability, and disinfection. An in vitro analysis. Photodiagnosis Photodyn Ther. 2023;41:10256.
• 12. Douglas RD, Steinhauer TJ, Wee AG. Intraoral determination of the tolerance of dentists for perceptibility and acceptability of shade mismatch. J Prosthet Dent. 2007;97:200–8.
• 13. Aksoy G, Polat H, Polat M, et al. Effect of various treatment and glazing (coating) techniques on the roughness and wettability of ceramic dental restorative surfaces. Colloids Surf B Biointerfaces. 2006;53:254–9.
• 14. Kumchai H, Juntavee P, Sun AF, et al. Effect of glazing on flexural strength of full-contour zirconia. Int J Dent. 2018;2018:8793481.
• 15. Uludag B, Usumez A, Sahin V, et al. The effect of ceramic thickness and number of firings on the color of ceramic systems: An in vitro study. J Prosthet Dent. 2007;97:25–31.
• 16. Bayindir F, Ozbayram O. Effect of number of firings on the color and translucency of ceramic core materials with veneer ceramic of different thicknesses. J Prosthet Dent. 2018;119:152–8.
• 17. Ozturk O, Uludag B, Usumez A, et al. The effect of ceramic thickness and number of firings on the color of two all-ceramic systems. J Prosthet Dent 2008;100:99–106.
• 18. Bachhav VC, Aras MA. The effect of ceramic thickness and number of firings on the color of a zirconium oxide based all ceramic system fabricated using CAD/CAM technology. J Adv Prosthodont. 2011;3:57–62.
• 19. Hasssija J, Hegde V, Sridhar N. An in vitro study on effect of ceramic thickness and multiple firings on colour of metal ceramic restorations. J Indian Prosthodont Soc. 2014;14:86–92.
• 20. Verma N, Awinashe V, Palekar U. To evaluate the variation in shade by a spectrophotometer of porcelain fused to metal samples with respect to repeated firing and variation in lot of ceramic – An in-vitro study. J Pierre Fauchard Acad (India Sect). 2013;27:53–9.
• 21. Gonuldas F, Yılmaz K, Ozturk C. The effect of repeated firings on the color change and surface roughness of dental ceramics. J Adv Prosthodont. 2014;6:309–16.
• 22. Ghanbarzadeh J, Sabooni MR, Tehrani NA. The influence of repeated firing on color stability of two porcelain types. J Med Sci. 2008;8:77–80.
• 23. Tuncel İ, Turp I, Düç B, et al. Metal-seramik restorasyonlarda fırınlama sayısı ve seramik kalınlığının renk değişimine etkisi. Selcuk Dent J. 2017;4:123–7.
• 24. Yılmaz K, Gonuldas F, Ozturk C. The effect of repeated firings on the color change of dental ceramics using different glazing methods. J Adv Prosthodont. 2014;6:427–33.
• 25. Okubo SR, Kanawati A, Richards MW, et al. Evaluation of visual and instrument shade matching. J Prosthet Dent. 1998;80:642–8.
• 26. Wee AG, Monaghan P, Johnston WM. Variation in color between intended matched shade and fabricated shade of dental porcelain. J Prosthet Dent. 2002;87:657–66.
• 27. Browning WD, Chan DC, Blalock JS, et al. A comparison of human raters and an intra-oral spectrophotometer. Oper Dent. 2009;34:337–43.
• 28. Fani G, Vichi A, Davidson CL. Spectrophotometric and visual shade measurements of human teeth using three shade guides. Am J Dent. 2007;20:142–6.
• 29. Da Silva JD, Park SE, Weber H-P, et al. Clinical performance of a newly developed spectrophotometric system on tooth color reproduction. J Prosthet Dent. 2008;99:361–8.
• 30. Dozić A, Kleverlaan CJ, El-Zohairy A, et al. Performance of five commercially available tooth color-measuring devices. J Prosthodont. 2007;16:93–100.
• 31. Gehrke P, Riekeberg U, Fackler O, et al. Comparison of in vivo visual, spectrophotometric and colorimetric shade determination of teeth and implant-supported crowns. Int J Comput Dent. 2009;12:247–63.
• 32. Celik G, Uludag B, Usumez A, et al. The effect of repeated firings on the color of an all-ceramic system with two different veneering porcelain shades. J Prosthet Dent. 2008;99:203–8.
• 33. Gozneli R, Kazazoglu E, Ozkan Y. Flexural properties of leucite and lithium disilicate ceramic materials after repeated firings. J Dent Sci. 2014;9:144–50.
• 34. Sahin V, Uludag B, Usumez A, et al. The effect of repeated firings on the color of an alumina ceramic system with two different veneering porcelain shades. J Prosthet Dent. 2010;104:372–8.
• 35. Wu L, Zhu H, Gai X, et al. Evaluation of the mechanical properties and porcelain bond strength of cobalt-chromium dental alloy fabricated by selective laser melting. J Prosthet Dent. 2014;111:51–5.
• 36. Han X, Sawada T, Schille C, et al. Comparative analysis of mechanical properties and metal-ceramic bond strength of co-cr dental alloy fabricated by different manufacturing processes. Materials (Basel). 2018;11:1801.