Al-Cu ÖTEKTİK ALAŞIMINA Ag, Zn VE Sn KATKILANMASININ MEKANİK VE ELEKTRİKSEL ÖZELLİKLERE ETKİSİNİN ARAŞTIRILMASI

Year 2019, Volume: 8 Issue: 2, 1115 - 1125, 31.07.2019

Aynur Aker Fehmi Nair İsmail Yıldırım Hasan Kaya

https://doi.org/10.28948/ngumuh.598194

Cited By: 1

Abstract

   Bu çalışmada, Al-Cu ötektik alaşımına %2 (ağ.)
 oranında Ag, Sn ve Zn metalleri katkılanarak
elde edilen Al-%33Cu-%2x [x=Ag, x=Sn, x=Zn] (ağ.)  alaşım sistemlerinin mikroyapı, mekanik ve
elektriksel özellikleri araştırılmıştır. Bu amaçla üçlü alaşımlar, belirlenen
oranlardaki metallerin vakum ortamında eritilmesinden sonra, eriyik haldeki
sıvı alaşımların döküm fırınındaki grafit potalara doldurularak
hazırlanmıştır.  Döküm halindeki
alaşımların, mikroyapı fotoğrafları taramalı elektron mikroskobu (SEM) yardımıyla
çekilmiştir. Çekilen bu fotoğraflardan, katkı elementlerinin mikroyapılara olan
etkileri araştırılmıştır. Al-%33Cu-%2x alaşımlarının kimyasal bileşim analizi
EDX ile yapılmıştır. Döküm halindeki Al-%33Cu-%2x [x=Ag, x=Sn, x=Zn] (ağ.)
alaşımları için mikrosertlik (HV) değerleri sırasıyla 184,6 kg/mm²,
144,2 kg/mm² ve 136 kg/mm²,  çekme dayanımı (s) değerleri 92
MPa, 72,7 MPa ve 53,7 MPa, elektriksel özdirenç (r)
değerleri ise 2,13x10^-8 mΩ, 3,47x10^-8 mΩ ve
3,07x10^-8
mΩ
olarak ölçülmüştür. Katkılama elementlerinin Al-Cu ötektiğinin mekanik ve
elektriksel özelliklerini etkilediği görülmüştür. Bu çalışmada bulunan deneysel
sonuçlar, literatürdeki benzer çalışmaların sonuçları ile karşılaştırılmıştır.

 

Keywords

Al-Cu Ötektik, üçlü alaşımlar, mikroyapı, çekme gerilimi, elektriksel iletkenlik

Thanks

Bu çalışma Erciyes Üniversitesi Bilimsel Araştırma Projeleri Birimi tarafından desteklenmiştir. (Proje no: FOA-2013-4400).

References

• [1] COLLING, D. A.. Industrial materials, metals and alloys., Prentice - HallInc., Ohio, 1995.
• [2] ÇADIRLI, E., ÜLGEN, A., GÜNDÜZ, M., “Directional Solidification of The Aluminium-Copper Eutectic Alloy”, Materials Transaction, JIM, 40, 989, 1999.
• [3] DE WILDE, J. et al., “Unconstrained Growth Along a Ternary Eutectic Solidification Path in Al–Cu–Ag: Preparation of a MAXUS Sound in Grocket Experiment”, Materials Science and Engineering: A, 51, 413-414. 2005.
• [4] OVERFELT, R.A., BAKHTIYAROV, S.I., TAYLOR, R.E., “Thermo Physical Properties of A201, A319, and A356 Aluminium Casting Alloys”. High Temperatures, High Pressures, 34, 401, 2002.
• [5] DE WILDE, J., FROYEN, L., WITUSIEWICZ, V.T., HECHT, U., “Two-Phase Planar and Regular Lamellar Coupled Growth Along The Univariant Eutectic Reaction in Ternary Alloys: An Analytical Approach and Application to The Al-Cu-Ag System”, Journal of Applied Physics, 97, 113515-113524, 2005.
• [6] JAİN, M., GUPTA, S.P., “Formation of İntermetallic Compounds in The Ni–Al–Si Ternary System”, Materials Characterization, 51, 243– 257, 2003.
• [7] CESCHINI, L., MORRI ALESSANDRO, MORRI ANDREA, GAMBERINI A., MESSIERI, S., “Correlation Between Ultimate Tensile Strength and Solidification Microstructure Forthes and Cast A357 Aluminium Alloy”, Materials and Design, 30, 4525–4531, 2009.
• [8] BASAVAKUMAR, K.G., MUKUNDA, P.G., CHAKRABORTY, M., “Influence of Grain Refinement and Modification on Microstructure and Mechanical Properties of Al–7Si and Al–7Si–2.5Cu Cast Alloys”, Materials Characterization, 59, 283-289, 2009.
• [9] WANG, F., ZOU, J.T., WANG, X.H., FAN, Z.K., “Effect of Melt Super Heat on Microstructure of Al4Fe2Mn1.5 Monelalloy”, Transactions Nonferrous Metals Society China, 19, 19-25, 2009.
• [10] AKER, A., “Al-Si Ötektik Alaşımına Yapılan Katkı Elementlerinin (Cu, Co, Ni, Sb Ve Bi) Mikroyapı ve Fiziksel Özelliklere Etkisinin Araştırılması”, Erciyes Üniversitesi, Fen Bilimleri Enstitüsü,Doktora Tezi, Kayseri, 2015.
• [11] ALIZADEH R., MAHMUDI R., “Effect of Sb Additions on The Microstructural Stability and Mechanical Properties of Cast Mg-4Zn Alloy”, Materials Science and Engineering. A, 527,5312-5317, 2010.
• [12] LEE, C.D., “ Effect of Damage Evolution of Si Particles on The Variability of The Tensil Eductility of Squeeze-Cast Al–10%Si–2%Cu–0.4%Mg Alloy”, Materials Science and Engineering A, 527, 3144–3150, 2010.
• [13] ARDAKAN, A.H., AJERSCH, F., “Thermo Dynamic Evaluation of Hyper Eutectic Al–Si (A390) Alloy with Addition of Mg”, Acta Materialia, 58, 3422–3428, 2010.
• [14] ARDAKAN, A.H., AJERSCH, F., “Effect of Conventional and Rheocasting Processes on Microstructural Characteristics of Hypereutectic Al–Si–Cu–Mg Alloy with Variable Mg Content”, Journal of Materials Processing Technology, 210, 767–775, 2010.
• [15] ZHANG, X.H., SU, G.C., JU, C.W., WANG, W.C., YAN, W.L., “Effect of Modification Treatment on The Microstructure and Mechanical Properties of Al–0.35%Mg–7.0%Si Cast Alloy”. Materials and Design, 31, 4408–4413, 2010.
• [16] SREEJA KUMARI S.S., PILLAI R.M., RAJAN T.P.D., PAI B.C., “Effects of Individual and Combined Additions of Be, Mn, Ca and Sr on The Solidification Behaviour, Structure and Mechanical Properties of Al-7Si-0.3Mg-0.8Fe Alloy”, Materials Science and Engineering. A, 460-46, 561-573, 2007.
• [17] COOK, B.A., ANDERSON, I.E., HARRINGA, J.L., AND KANG, S.K., “ Isothermal Aging of Near-Eutectic Sn-Ag-Cu Solder Alloys and Its Effect on Electrical Resistivity”, Journal of Electronic Materials, 32, 12, 1384, 2003.
• [18] BRANDT, R. AND NEUER, G., “Electrical Resistivity and Thermal Conductivity of Pure Aluminum and Aluminum Alloys upto and Above The Melting Temperature”, International Journal Of Thermophysics, 28, 5, 1429, 2007.
• [19] OVERFELT R.A., BAKHTIYAROV S.I., TAYLOR R.E., “Thermo Physical Properties of A201, A319, and A356 Aluminium Casting Alloys. High Temperatures”, High Pressures, 34, 401, 2012.
• [20] COOK, B.A., ANDERSON, I.E., HARRINGA, J.L., AND TERPSTRA, R.L., “Effect of Heat Treatment on The Electrical Resistivity of Near-Eutectic Sn-Ag-Cu Pb-Free Solder Alloys”, Journal of Electronic Materials, 31, 11, 2002.
• [21] L. GENG, B.P. ZHANG, A.B. LI, DONG, C.C., “Microstructure and Mechanical J. Buha, The Effect of Ba on The Microstructure and Age Hardening of an Mg-Zn Alloy”, Materials Science and Engineering: A, 491, 70-79, 2008.
• [22] BUHA, J., “The Effect of Micro-Alloying Addition of Cr on Age Hardening of an Mg-Zn Alloy”, Materials Science and Engineering: A, 492, 293-299, 2008.
• [23] BUHA, J., “Grain Refinement and Improved Age Hardening of Mg-Zn Alloy By Atraceamount of V”, Acta Materials, 56, 3533-3542, 2008.
• [24] BUHA,J., “Natural Ageing in Magnesium Alloys and Alloying with Ti”, Jorunal of Materials Science, 43, 1220e1227, 2008.
• [25] ALIZADEH, R., MAHMUDIR., “Effect of Sb Additions on The Microstructural Stability and Mechanical Properties of Cast Mg-4Zn Alloy”, Materials Science and Engineering: A, 527, 5312e5317, 2010 .
• [26] AVEDESIAN,M.M.,BAKER, H. (Eds.), ASM Specialty handbook: magnesium and magnesium alloys, ASM International, Materials Park, Oh. U.S.A, 1999.
• [27] SHAHZAD,M., WAGNER,L., “Microstructure Development During Extrusion in Awrought Mg-Zn-Zr Alloy”, Scripta Materiallia, 60, 536-538, 2009.
• [28] YUAN, W., LIANG, Z., ZHANG, C., WEI, L., “ Effects of La Addition on The Mechanical Properties and Thermal-Resistant Properties of Al–Mg–Si–Zr Alloys Based on AA 6201”, Materials Design, 34, 788–792, 2012.
• [29] HE, W., ZHONG, H., LIU, H., ZHANG, J., ZENG, L., “ Crystal Structure and Electrical Resistivity of NdCo2Al8”, Journal of Alloys And Compounds, 467, 6, 2009.
• [30] DUTTA, S., SHUBHA, V., RAMESH, T.G., FLORITA, D’SA., “Thermal and Electronic Properties of Bi1−Xsbx Alloys”, Journal Of Alloys And Compounds, 467, 305, 2009.
• [31] YUAN, W., LIANG, Z,.” Effect of Zr Addition on Properties of Al–Mg–Si Aluminum Alloy Used For All Aluminum Alloy Conductor”, Materials and Design, 32, 4195–4200, 2001.
• [32] HOSSEINIFAR, M., MALAKHOV, D.V., “Effect of Ce and La on Microstructure and Properties of A 6XXX Series Type Aluminum Alloy”, Journal Materials Science, 43, 7157–7164, 2008.
• [33] WANG, S.,, ZHOU, H., KANG, Y., “The Influence of Rare Earth Elements on Microstructures and Properties of 6061 Aluminum Alloy Vacuum-Brazedjoints”, Journal Alloys Compdouns, 352, 79–83, 2003.
• [34] DAS, S. K., SHARIF, A., CHAN, Y.C., WONG, N.B., YUNG, W.K.C., “ Influence of Small Amount of Al And Cu on The Microstructure, Microhardness and Tensile Properties of Sn-9Zn Binary Eutectic Solder Alloy”, Journal of Alloy and Comppounds, 481, 167-172, 2009.
• [35] BANERJEE, S., ROBI, P.S., SRINIVASAN, A., LAKAVATH, P.K., “Effect of Trace Additions of Sn on Microstructure and Mechanical Properties of Al-Cu-Mg Alloys”, Materials and Design, 31, 4007-4015, 2010.
• [36] SILCOCK, JM., FLOWER, HM., “Comments on a Comparison of Early and Recent Work on The Effect of Trace Additions of Cd, In, or Sn on The Nucleation and Growth ofin Al–Cu Alloys”, Scripta Mater, 46, 389–94, 2002.
• [37] VLADIVOJ,O., MARGARITA, S., “Resistance to Recrystallization Due to Scand Zr Additionto Al–Mg Alloys”, Material Characterization, 47, 157–62, 2001.
• [38] VESNA, M., SLAVICA,Z., VELIMIR,R., MILAN, J., “The Effect of Micro Alloying with Silicon and Germanium on Microstructure and Hardness of a Commercial Aluminium Alloy”, Journal of Serbian Chemical Society, 68, 11, 893–901, 2003.
• [39] ANDORNO, A.T., GUERREIRO, M.R., SILVA, R.A.G., “Agingkinetics in The Cu-8wt.%Al Alloy with Ag Additions”, Journal of Alloys and Compounds, 354, 165-170, 2003.
• [40] CARVALHO, T.M., ADORNO, A.T., SILVA, R.A.G., “Ag-Rich Phase Formation in The Cu-6wt.%Al Alloy with Ag Additions”, Journal of Physics and Chemistry of Solids, 69, 2025-2031, 2008.
• [41] SILVA, R.A.G., PAGANOTTI, A., GAMA, S., ADORNO, A.T., CARVALHO, T.M., SANTOS, SANTOS, C.M.A., “Investigation of Thermal, Mechanical And Magnetic Behaviors of The Cu-11%Al Alloy with Ag and Mn Additions”, Materials Characterization, 75, 194-199, 2013.
• [42] SU, J.J., XIE, Z.W., YANG, Y.Z., “Effect Of Sn Substitution and Heat Treatment on Microstructure and Microhardness of Co38-Ni34-Al28-Snx Magnetic Shape Memory Alloys”, Transactions of Nonferrous Metals Society China, 22, 2158-2168, 2012.
• [43] AKER A., KAYA, H., “Effect Of Alloying Elements and Growth Rates on Microstructure and Mechanical Properties in The Directionally Solidified Al-Si-X Alloys”, Journal of Alloys Compounds, 694, 145-154, 2017.
• [44] SMITH F.M., “Measurement of Sheet Resistivities with the Four-Point Probe”, The Bell System Technical Journal, 37, 711, 1958.
• [45] ENGIN S., BÜYÜK U., “Variations with Growth Rate of The Microstructurel, Mechanical and Electrical Properties of Directionally Solidified The Al-Cu Alloy”, GÜFBED/GUSTIJ, 8, 2,209-221, 2018.
• [46] KAYA, H., “Dependence of Electrical Resistivity on Temperature and Composition of Al-Cu Alloy”, Materials Research Innations, 6, 3, 224-229, 2012.
• [47] KAYA, H. ÇADIRLI, E., GÜNDÜZ, M., RABIGER, D., ECKERT, S., “Dependency of Structure, Mechanical and Electrical Properties on Rotating Magneticfield in The Bi- Sn-Ag Ternary Eutectic Alloy”, International Journal of Materials Research, 107, 4, 362-371, 2016.
• [48] BÖYÜK, U. MARAŞLI, N., KAYA, H., ÇADIRLI, E., KEŞLIOĞLU K., “Directional Solidification of Al-Cu–Ag Alloy”, Applied Physics A, 95, 923-932, 2009.
• [49] AKER A., KAYA H., "Measurements of electrical and thermal properties with growth rate, alloying elements and temperature in the Al–Si–X alloys", International Journal Of Cast Metals Research, 30, 292-300, 2017
• [50] MASSALSKI, TB (ED)., “Binary alloy phase diagrams”, 3, ASM International, Materials Park, 3. 1990.