EN
TR
THE EFFECT OF ANGLE ADHESIVE WITH BONDED IN Z TYPE MATERIALS
Öz
The usage of adhesives as connecting on method is increasing rapidly in today world. Many of research, development and engineering have been made to find the most important parameters for a success adhesion. In this study, stress analysis of Z type bonded sheet that connected with various adhesives has been investigated. The adhesive thickness was constant (0.20 mm) b lap joint length and lap joint angles (θ=15º, 30º, 45º) were varied for analysis. This study has deal with the effect of overlap angle on predicting of the damage load of adhesively bonded joints via a linear FEM(Finite Element Method). All of the analysis were carried out with Ansys (10.0) computer software with a generally purposed finite element application. Experimental results were compared with numerical results and were found quite reasonable.
Anahtar Kelimeler
Details
Primary Language
Turkish
Subjects
-
Journal Section
-
Publication Date
March 1, 2010
Submission Date
August 29, 2014
Acceptance Date
-
Published in Issue
Year 2010 Volume: 5 Number: 2
APA
Adin, H., İşcan, B., & Turgut, A. (2010). THE EFFECT OF ANGLE ADHESIVE WITH BONDED IN Z TYPE MATERIALS. Engineering Sciences, 5(2), 370-380. https://doi.org/10.12739/nwsaes.v5i2.5000067100
AMA
1.Adin H, İşcan B, Turgut A. THE EFFECT OF ANGLE ADHESIVE WITH BONDED IN Z TYPE MATERIALS. Engineering Sciences. 2010;5(2):370-380. doi:10.12739/nwsaes.v5i2.5000067100
Chicago
Adin, Hamit, Bahattin İşcan, and Aydın Turgut. 2010. “THE EFFECT OF ANGLE ADHESIVE WITH BONDED IN Z TYPE MATERIALS”. Engineering Sciences 5 (2): 370-80. https://doi.org/10.12739/nwsaes.v5i2.5000067100.
EndNote
Adin H, İşcan B, Turgut A (March 1, 2010) THE EFFECT OF ANGLE ADHESIVE WITH BONDED IN Z TYPE MATERIALS. Engineering Sciences 5 2 370–380.
IEEE
[1]H. Adin, B. İşcan, and A. Turgut, “THE EFFECT OF ANGLE ADHESIVE WITH BONDED IN Z TYPE MATERIALS”, Engineering Sciences, vol. 5, no. 2, pp. 370–380, Mar. 2010, doi: 10.12739/nwsaes.v5i2.5000067100.
ISNAD
Adin, Hamit - İşcan, Bahattin - Turgut, Aydın. “THE EFFECT OF ANGLE ADHESIVE WITH BONDED IN Z TYPE MATERIALS”. Engineering Sciences 5/2 (March 1, 2010): 370-380. https://doi.org/10.12739/nwsaes.v5i2.5000067100.
JAMA
1.Adin H, İşcan B, Turgut A. THE EFFECT OF ANGLE ADHESIVE WITH BONDED IN Z TYPE MATERIALS. Engineering Sciences. 2010;5:370–380.
MLA
Adin, Hamit, et al. “THE EFFECT OF ANGLE ADHESIVE WITH BONDED IN Z TYPE MATERIALS”. Engineering Sciences, vol. 5, no. 2, Mar. 2010, pp. 370-8, doi:10.12739/nwsaes.v5i2.5000067100.
Vancouver
1.Hamit Adin, Bahattin İşcan, Aydın Turgut. THE EFFECT OF ANGLE ADHESIVE WITH BONDED IN Z TYPE MATERIALS. Engineering Sciences. 2010 Mar. 1;5(2):370-8. doi:10.12739/nwsaes.v5i2.5000067100