MODIFICATION AND EVALUATION OF AN ELECTRIC DRYER FOR HIGH MOISTURE VEGETABLES

Abstract

Food wastage resulting from lack of facilities for drying and the unhygienic methods of processing are major causes of food shortage in supply chain. Thus, to address these issues, an existing electric dryer was modified for drying high moisture vegetables. The machine was evaluated for drying tomatoes with an initial moisture content of 63% (wb). A heating element was attached below the fan of the dryer to allow a through air circulation instead of the cross air flow pattern of the previous design. Four trays, with each having a capacity of 0.092m³, were loaded with 30.4kg of slice tomatoes at a rate of 7.6kg per tray and dried for 5h. Thermostat was used to regulate temperature and relative humidity in the drying compartment at 42^oC and 11% RH. Control experiment was set up to determine the quality loss upon drying under sun for 5 h. Nutritional quality parameters of the dried products were determined using standard known methods. The results showed that actual volume of heated air delivered to the drying chambers, thickness of polyurethane used as lagging and power requirement for heating were 8.96m³, 38mm and 3000W, respectively. The nutritional quality loss in the sun dried samples was lower than the corresponding loss in the dryer. The modified dryer has 73% drying efficiency, which higher than the efficiency of the existing dryer. 

Keywords

• Design,Dryer,Performance,Tomatoes,Vitamin C,Vitamin C

References

1. 1. Rice, O.A., Rice, P., and Taylor, S.R., (1993). Tropical Crops in West Africa. 2nd ed., The Macmillan press ltd. Pp. 56.
2. 2. Kiremire, B.T., Musinguzi, E., Kikafunda, J.K., and Lukwago, F.B., (2010). Effects of Vegetable Drying Techniques on Nutrient Content: A Case Study of South-Western Uganda. Af. J. Food, Agric. Nutri. Develop. 10(5):2587-2600.
3. 3. Hall, A.S., (1988). Machine Design (Theory Problem). Schaums online series. 1988, Pp. 367.
4. 4. Asiedu, J.J., (1988). Processing Tropical Crops, A Technological Approach. London, Macmillan Press, Pp. 35.
5. 5. Chua, K.J. and Chou, S.K., (2003). Low-cost Drying Methods for Developing Countries. Trends in Food Sci. & Techn. 14:519–528.
6. 6. Ibupoto, N.P., (2007). Effect of Various Drying Methods on Nutritional Quality of Okra Vegetable. National Agricultural Research Centre.
7. 7. Pragati, S. and Dahiya Dhawan, S., (2003). Effect of Drying Methods on Nutritional Composition of Dehydrated Aonla Fruits During Storage. Plant Foods Hum Nutr, 58:1. doi:10.1023/B:QUAL.0000040332.98384.c4.
8. 8. Alakali, J.S., Kucha, C.T., Rabiu, I.A., (2015). Effect of Drying Temperature on the Nutritional Quality of Moringa Oleifera leaves, Af J. Food Sci. 9(7):395-399.

9. 9. Danso-Boateng, E., (2013). Effect of Drying Methods on Nutrient Quality of Basil (Ocimum viride) Leaves Cultivated in Ghana. Inter Food Res. J., 20(4):1569-1573.
10. 10. Ukegbu, P.O., Okereke, C.J., (2013). Effect of Solar and Sun Drying Methods on the Nutrient Composition and Microbial Load in Selected Vegetables, African Spinach, Fluted Pumpkin and Okra. Sky J. Food Sci., 2(5), pp:35-40, July, 2013.
11. 11. Fadeyibi, A., Osunde, Z.D., Agidi, G., Idah, P.A., Egwim, E.C., (2016). Development and Optimisation of Cassava Starch-Zinc-Nanocomposite Film for Potential Application in Food Packaging. J. Food Process. & Techn., 7:591. doi:10.4172/2157-7110.1000591.
12. 12. Yisa, M.G., Idah, P.A., Alabadan, B.A., (1998). Development of an Electric Dryer for Biomaterials. Nig. J. Biotech., 9(1):92-100.
13. 13. Fadeyibi, A., Osunde, Z.D., Ussaini, M.S., Idah, P.A., Balami, A.A., (2012). Evaluating Monolayer Moisture Content of Rubber Seed Using BET and GAB Sorption Equations, Int. J. Farm & Al. Sci., 1(3), 72-76.
14. 14. Onwuka, G.I., (2005). Food Analysis and Instrumentation Theory and Practice. University of Agriculture, Umudike, Nigeria Press, 162-204, ISBN: 978047686.